Support for the Resol VBUS protocol?

Use this forum to discuss possible implementation of a new feature before opening a ticket.
A developer shall edit the topic title with "[xxx]" where xxx is the id of the accompanying tracker id.
Duplicate posts about the same id. +1 posts are not allowed.
User avatar
bbqkees
Posts: 512
Joined: Sunday 17 August 2014 21:01
Target OS: Linux
Domoticz version: 3.8x
Location: The Netherlands
Contact:

Re: Support for the Resol VBUS protocol?

Post by bbqkees » Monday 04 June 2018 16:05

Likely yes.

have you tried any other sketch that sends data to the serial port so you know that works anyway?
Intel NUC-> Philips Hue, Aeon Zwave stick V2, Qubino, Fibaro, Everspring, Philio, RFXCom, X10, Harmony Hub, Xiaomi Flora + Gateway, BS440. And P1 / Resol VBus / Nefit EMS bus / DHT21 / DS18B20 / Sonoff / I2C display, all via Arduino/ESP8266.

Wass1
Posts: 15
Joined: Thursday 05 April 2018 11:46
Target OS: Windows
Domoticz version:
Contact:

Re: Support for the Resol VBUS protocol?

Post by Wass1 » Tuesday 05 June 2018 13:47

No I haven't can you enlighten me about this feature ?? what kind of sketch ??

Wass1
Posts: 15
Joined: Thursday 05 April 2018 11:46
Target OS: Windows
Domoticz version:
Contact:

Re: Support for the Resol VBUS protocol?

Post by Wass1 » Tuesday 05 June 2018 16:04

Hello
Finaly i am getting data from my circuit the problem was the cable connecting my resol regulator to the circuit , everything is working fine now... :D :D :D but if you don't mind me asking do you have any idea on how to store this data on a SD card ??

Bernoo
Posts: 8
Joined: Sunday 07 January 2018 23:31
Target OS: Raspberry Pi
Domoticz version: 4.97
Location: Germany
Contact:

Re: Support for the Resol VBUS USB Adapter?

Post by Bernoo » Sunday 22 July 2018 22:09

Hello,
i have a Resol BX controller and a VBUS to USB adapter and i would like to display the temperatures with domoticz. did anyone else do this before? I do not know how.

Grettings Bernoo
don't drink whisky without water and don't drink water without whisky...

User avatar
mrccore
Posts: 12
Joined: Wednesday 07 December 2016 12:15
Target OS: Raspberry Pi
Domoticz version: 3.5877
Location: Madeira
Contact:

Re: Support for the Resol VBUS protocol?

Post by mrccore » Wednesday 25 July 2018 22:39

Hi.

I have build the vbus sensor and connected it to arduino mega that is using a wiznet w5100.
On serial console i can see that my setup is workin OK, i get the values from my DeltaSol C 0x4212 heres a debug info:

---------------
Destination: 10
Source: 4212
Protocol Version: 1
Command: 100
Framecount: 7
Checksum: 3
---------------
---------------
Now decoding for DeltaSol C 0x4212
---------------
------Decoded VBus data------
Destination: 10
Source: 4212
Protocol Version: 1
Command: 100
Framecount: 7
Checksum: 3
------Values------
Sensor 1: 24.30
Sensor 2: 35.70
Sensor 3: 50.40
Sensor 4: 0.00
Relay 1: 0
Relay 2: 0
0
------END------

My problem is that i cant get any data to be display in my domoticz server.
I can ping the mega on my network but no data on my domoticz server.

Can anyone help me out on this problem
This is the ethernet shield i have on my mega:

Image

And here's the link to protoboard i have build:

https://1drv.ms/u/s!ADyQTNUUw6kNgoUt
https://1drv.ms/u/s!ADyQTNUUw6kNgoUs

User avatar
bbqkees
Posts: 512
Joined: Sunday 17 August 2014 21:01
Target OS: Linux
Domoticz version: 3.8x
Location: The Netherlands
Contact:

Re: Support for the Resol VBUS protocol?

Post by bbqkees » Thursday 26 July 2018 9:31

First make sure that you have chosen a proper IP address and a unique mac address.
Then make sure both the Arduino and the machine running Domoticz are on the same subnet (so f.i. 192.168.1.x).

If there two devices with the same IP address then it won't work.

A good next step would be to modify the sketch such that it only sends a dummy httpRequestTemp(IDX, value) so you know that works as well.
Intel NUC-> Philips Hue, Aeon Zwave stick V2, Qubino, Fibaro, Everspring, Philio, RFXCom, X10, Harmony Hub, Xiaomi Flora + Gateway, BS440. And P1 / Resol VBus / Nefit EMS bus / DHT21 / DS18B20 / Sonoff / I2C display, all via Arduino/ESP8266.

Wass1
Posts: 15
Joined: Thursday 05 April 2018 11:46
Target OS: Windows
Domoticz version:
Contact:

Re: Support for the Resol VBUS protocol?

Post by Wass1 » Sunday 09 September 2018 18:29

Dear programers
I have built my own dattaloger for vbus resol, using the vbus library, it worked fine with the Resol DeltaSol C4 and Resol DeltaSol BS , but using the same code and library for the Resol Delta Sol E generated many errors , and i can't seem to figure out why any suggestions ??
Attachments
resl.PNG
resl.PNG (16.47 KiB) Viewed 99 times

Wass1
Posts: 15
Joined: Thursday 05 April 2018 11:46
Target OS: Windows
Domoticz version:
Contact:

Re: Support for the Resol VBUS protocol?

Post by Wass1 » Wednesday 12 September 2018 11:11

Help please i m still getting the same error values any suggestions ??

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest