Neo Coolcam wallplug sending multiple kWh measurements

For Z-Wave related questions in Domoticz
Post Reply
bramski
Posts: 44
Joined: Thursday 20 July 2017 16:26
Target OS: -
Domoticz version:
Contact:

Neo Coolcam wallplug sending multiple kWh measurements

Post by bramski » Friday 07 December 2018 11:21

I have some strange issues with one of my Neo Coolcam wall plugs.
All measurements of my different devices are sent to InfluxDB to be visualized in Grafana. Since a few weeks my visualizations are misbehaving.
The root cause seem to be my washing machine plug is reporting wrong measurements. I have checked the logs and see the following:

Code: Select all

2018-12-07 10:08:31.653 (Zwave USB) General/kWh (kWh wasmachine)
2018-12-07 10:08:32.143 InfluxLink: value Usage,idx=730,name=kWh-wasmachine value=105100.000
2018-12-07 10:08:32.534 (Zwave USB) General/kWh (kWh wasmachine)
2018-12-07 10:08:33.638 (Zwave USB) General/kWh (kWh wasmachine)
2018-12-07 10:08:33.671 InfluxLink: value Usage,idx=730,name=kWh-wasmachine value=218290.000
2018-12-07 10:08:34.527 (Zwave USB) General/kWh (kWh wasmachine)
2018-12-07 10:08:34.701 InfluxLink: value Usage,idx=730,name=kWh-wasmachine value=30.000
You see the concerning wallplug is sending 3 different measurements withing 3 seconds and the values are all over the place.

Anyone experienced the same issue and know how to proceed?

User avatar
gizmocuz
Posts: 8721
Joined: Thursday 11 July 2013 18:59
Target OS: Raspberry Pi
Domoticz version: beta
Location: Top of the world
Contact:

Re: Neo Coolcam wallplug sending multiple kWh measurements

Post by gizmocuz » Friday 07 December 2018 11:44

could you post a screenshot of the openzwave control panel ? does this sensor report kva also ?
Quality outlives Quantity!

bramski
Posts: 44
Joined: Thursday 20 July 2017 16:26
Target OS: -
Domoticz version:
Contact:

Re: Neo Coolcam wallplug sending multiple kWh measurements

Post by bramski » Friday 07 December 2018 11:56

Here is a screenshot of the OpenZwave configuration panel for the concerning device. Not sure how I can see if it reports kVa.
I am not experiencing any issues with my other Neo Coolcam plugs. I have 8 of them and some fibaro's.
Actually I did a factory reset of the plug a few minutes ago, will let you know if this solves the problem.
Attachments
OpenZWave Control Panel.png
OpenZWave Control Panel.png (36.05 KiB) Viewed 30 times

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests