rfxcom in bootloader mode

Topics (not sure which fora)
when not sure where to post, post here and mods will move it to right forum.
Post Reply
schoe024
Posts: 13
Joined: Wednesday 10 June 2015 16:19
Target OS: Raspberry Pi
Domoticz version: beta
Location: Apeldoorn
Contact:

rfxcom in bootloader mode

Post by schoe024 » Saturday 24 November 2018 22:51

raspi with ubuntu 18.04 and latest domoticz beta.
Connecting rfxcom to windows I can flash it and see a lot of traffic.
Connecting to raspberry seems fine, until I start domoticz.
Then the red light comes on, indicating the module is in bootloader mode.
no in or outgoing traffic possible. Stopping domoticz will make the light go out.
can I conclude the problem is in domoticz? and how to fix it?

schoe024
Posts: 13
Joined: Wednesday 10 June 2015 16:19
Target OS: Raspberry Pi
Domoticz version: beta
Location: Apeldoorn
Contact:

Re: rfxcom in bootloader mode

Post by schoe024 » Monday 03 December 2018 2:04

solved.
reset usb port, flash firmware immediately after that. start flash within 1 second. (before rfxcom goes to bootloader mode again)
After that everything working again

b_weijenberg
Posts: 704
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: rfxcom in bootloader mode

Post by b_weijenberg » Monday 03 December 2018 10:56

See also chapter 19 in the RFXtrx User Guide how to recover from an interrupted or wrong firmware flash.
RFXtrx433, RFXtrx433E, RFXtrx433XL

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 1 guest