What are all these devices?

Topics (not sure which fora)
when not sure where to post, post here and mods will move it to right forum.
Post Reply
Theedoek
Posts: 9
Joined: Wednesday 08 August 2018 22:09
Target OS: -
Domoticz version:
Contact:

What are all these devices?

Post by Theedoek » Friday 10 August 2018 11:20

First of all, I'm fairly new to Domoticz and all that comes with it (Z-Wave, Hue, etc.). I haven't done much with it yet as I am still learning.
I borrowed a Philips Hue set and Aeon Z-Wave set from a friend and used my Raspberry Pi 3 to install Domoticz on a freshly installed Raspbian Stretch Lite. Followed all the articles to get my system up to date and running (including monit and HomeKit).

Hardware added: Hue bridge and Aeon USB Controller
Devices: Hue: three light bulbs / Z-Wave: Aeon Smart Switch 6 and Aeon Multi Sensor 6

Both z-wave devices from Aeon provide much more functionality than just the switch and sensor. In case of the smart sensor 6, it creates the following devices:
z-wave additional devices.png
z-wave additional devices.png (12.95 KiB) Viewed 339 times
The first and last line are obvious, but what do the others do? I tried various things but can't find out what they do and how they can be used.

Eventually, if I like how Domoticz works and can find some good not too expensive hardware, I will equip my new house with it and also wish to configure an alarm system using Domoticz.

blauwebuis
Posts: 363
Joined: Wednesday 21 December 2016 10:11
Target OS: Raspberry Pi
Domoticz version: current
Contact:

Re: What are all these devices?

Post by blauwebuis » Saturday 11 August 2018 19:35

you'll have to ask Aeon?

Theedoek
Posts: 9
Joined: Wednesday 08 August 2018 22:09
Target OS: -
Domoticz version:
Contact:

Re: What are all these devices?

Post by Theedoek » Saturday 11 August 2018 19:36

We'll i crawled though the documentation already, but no luck.
And I can't imagine that no one else has come this before...

User avatar
Derik
Posts: 2186
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:

Re: What are all these devices?

Post by Derik » Sunday 12 August 2018 13:00

All this devices are Zwave device [ from the sensor you learn ] you can use for alarm settings or alarm
All these sensor are working in Domoticz.
So when a X value is reached domoticz can do something with that.

Example..
There are max value into Zwave device when you use a powerdevice.
when the max value is there.. a warningsensor is going to on
When the max of the sensor is not there, the warningsensor is going to off.
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 2 guests