machinon theme

User avatar
EdddieN
Posts: 543
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Saturday 15 September 2018 12:21

EdwinK wrote:
Saturday 15 September 2018 9:38
Running on Mac El Capitan and used both chrome and safari browsers, both give the same problems. For now switched back to one of the standard themes, and no problems.

Already did clean appcache and the normal cache. I'll try the incognito method next.
Can you try this?

1.- Try the backup button
2.- on terminal, run top
3.- is your domoticz eating a lot of CPU?

I just tried on High Sierra and Chrome and it worked, that said, it took a while as my DB is quite big. For a moment I thought it was not working, until I run top and I could see it was working hard
11101101 - www.machinon.com

User avatar
EdddieN
Posts: 543
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Saturday 15 September 2018 12:31

heggink wrote:
Saturday 15 September 2018 10:21
How are the settings saved? On Android, I can select dark and it sticks. On linux/chrome, I can select dark but next time I start chrome, I am back to the light settings. I do clear all my cache and cookies on exit though (click & clean). Tried to get click&clean to retain all info but it still won;t stick :-(.
I can imagine in a cookie? That is the only way to have different setups in different devices.

Just trie don mac with Chrome and Safari. Works fine.
Tried also on Ubuntu with Firefox, works fine too.

If you clear the cache it will probably reset your settings too. Failing that, you can always try to reset the theme itself before saving settings and see how it goes?
11101101 - www.machinon.com

User avatar
DewGew
Posts: 264
Joined: Thursday 21 April 2016 12:01
Target OS: Raspberry Pi
Domoticz version: V4.9741
Location: Sweden
Contact:

Re: machinon theme

Post by DewGew » Saturday 15 September 2018 15:33

heggink wrote:
Saturday 15 September 2018 10:21
How are the settings saved? On Android, I can select dark and it sticks. On linux/chrome, I can select dark but next time I start chrome, I am back to the light settings. I do clear all my cache and cookies on exit though (click & clean). Tried to get click&clean to retain all info but it still won;t stick :-(.
Settings are stored in localStorage in your browser.
Raspberry Pi 2B - domoticz - Aeon Labs Z-Stick GEN5 - RFlink gateway
NanoPi NEO-air - domoticz - REGO6XX interface
Dashticz V2 - Homebridge

Holland
Posts: 353
Joined: Friday 12 July 2013 13:53
Target OS: Raspberry Pi
Domoticz version: Beta Ch
Location: The Netherlands
Contact:

Re: machinon theme

Post by Holland » Saturday 15 September 2018 23:40

To everyone that is working on this project, fantastic job, I really like the theme.

Just a cosmetic issue I would like to bring forward.

Dashboard and other tabs resize when the refresh button is pressed. This is browser independent.
A picture makes it clear. As can be seen below, a refresh results in a
Switching tabs
Attachments
Refresh page.JPG
Refresh page.JPG (165.05 KiB) Viewed 772 times
Switchs tabs.JPG
Switchs tabs.JPG (168.77 KiB) Viewed 772 times

User avatar
EdddieN
Posts: 543
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Sunday 16 September 2018 10:46

Hello,

Yes it is a known issue: https://github.com/EdddieN/machinon-dom ... /issues/31

If you can add those screens to the issue above on github it would be great.

Thanks for the feedback! :)
11101101 - www.machinon.com

User avatar
EdwinK
Posts: 1382
Joined: Sunday 22 January 2017 22:46
Target OS: Raspberry Pi
Domoticz version: BETA
Location: Rhoon
Contact:

Re: machinon theme

Post by EdwinK » Sunday 16 September 2018 10:50

EdddieN wrote:
Saturday 15 September 2018 12:21
EdwinK wrote:
Saturday 15 September 2018 9:38
Running on Mac El Capitan and used both chrome and safari browsers, both give the same problems. For now switched back to one of the standard themes, and no problems.

Already did clean appcache and the normal cache. I'll try the incognito method next.
Can you try this?

1.- Try the backup button
2.- on terminal, run top
3.- is your domoticz eating a lot of CPU?

I just tried on High Sierra and Chrome and it worked, that said, it took a while as my DB is quite big. For a moment I thought it was not working, until I run top and I could see it was working hard

As far as i can see with top, domoticz isn't using much cpu.
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | RFxcom | Dashticz V2

User avatar
EdddieN
Posts: 543
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Sunday 16 September 2018 12:02

Mmm... I think we need more feedback on a way to reproduce it. I can not reproduce the error, do you see anything odd under chrome inspector?
11101101 - www.machinon.com

Holland
Posts: 353
Joined: Friday 12 July 2013 13:53
Target OS: Raspberry Pi
Domoticz version: Beta Ch
Location: The Netherlands
Contact:

Re: machinon theme

Post by Holland » Sunday 16 September 2018 12:35

EdddieN wrote:
Sunday 16 September 2018 10:46
Hello,

Yes it is a known issue: https://github.com/EdddieN/machinon-dom ... /issues/31

If you can add those screens to the issue above on github it would be great.

Thanks for the feedback! :)
Will do!

poudenes
Posts: 594
Joined: Wednesday 08 March 2017 10:42
Target OS: Linux
Domoticz version: 3.8993
Location: Amsterdam
Contact:

Re: machinon theme

Post by poudenes » Sunday 16 September 2018 12:44

Hi ALl,

Maybe a idea ( i think its a good feature) to have a icon that indicates if a bulb have a Sub/Slave Devices.
I use Sub/Slave device option a lot. Would be nice to see a icon like a link icon so you see in the overview what bulbs are linked or not.

Something like this next to the diagram icon right down corner
Unknown.png
Unknown.png (2.4 KiB) Viewed 732 times
Cheers,
Peter
RPi3 with OSMC - RPi3 with Domoticz - Dashticz - MiLight - Nanolead Aurora - KaKu - Logitech Hamony - Nest - RFLink

User avatar
EdwinK
Posts: 1382
Joined: Sunday 22 January 2017 22:46
Target OS: Raspberry Pi
Domoticz version: BETA
Location: Rhoon
Contact:

Re: machinon theme

Post by EdwinK » Sunday 16 September 2018 18:48

EdddieN wrote:
Sunday 16 September 2018 12:02
Mmm... I think we need more feedback on a way to reproduce it. I can not reproduce the error, do you see anything odd under chrome inspector?
Haven't been able to get online much today, but as far as I can see now, it must be a larger problem with Domoticz it self, as it is now also not working on other themes, and after some time, Domoticz goes off-line.

However, this is what I could find sofar:
Spoiler: show

Code: Select all

[Deprecation] Application Cache is deprecated in non-secure contexts, and will be restricted to secure contexts in M69, around September 2018. Please consider migrating your application to HTTPS, and eventually shifting over to Service Workers. See https://goo.gl/rStTGz for more details.
:8080/#/Setup:1 Document was loaded from Application Cache with manifest http://192.168.0.11:8080/html5.appcache
:8080/#/Setup:1 Application Cache Checking event
jquery-3.3.1.min.js:2 [Deprecation] Synchronous XMLHttpRequest on the main thread is deprecated because of its detrimental effects to the end user's experience. For more help, check https://xhr.spec.whatwg.org/.
send @ jquery-3.3.1.min.js:2
ajax @ jquery-3.3.1.min.js:2
(anonymous) @ custom.js:14
VM204:1 Uncaught SyntaxError: Unexpected token <
    at m (jquery-3.3.1.min.js:2)
    at Function.globalEval (jquery-3.3.1.min.js:2)
    at text script (jquery-3.3.1.min.js:2)
    at Ut (jquery-3.3.1.min.js:2)
    at k (jquery-3.3.1.min.js:2)
    at XMLHttpRequest.<anonymous> (jquery-3.3.1.min.js:2)
    at XMLHttpRequest.send (<anonymous>:1:781)
    at Object.send (jquery-3.3.1.min.js:2)
    at Function.ajax (jquery-3.3.1.min.js:2)
    at custom.js:14
m @ jquery-3.3.1.min.js:2
globalEval @ jquery-3.3.1.min.js:2
text script @ jquery-3.3.1.min.js:2
Ut @ jquery-3.3.1.min.js:2
k @ jquery-3.3.1.min.js:2
(anonymous) @ jquery-3.3.1.min.js:2
(anonymous) @ VM172:1
send @ jquery-3.3.1.min.js:2
ajax @ jquery-3.3.1.min.js:2
(anonymous) @ custom.js:14
load (async)
send @ jquery-3.3.1.min.js:2
ajax @ jquery-3.3.1.min.js:2
(anonymous) @ custom.js:14
VM206:1 Uncaught SyntaxError: Unexpected token <
    at m (jquery-3.3.1.min.js:2)
    at Function.globalEval (jquery-3.3.1.min.js:2)
    at text script (jquery-3.3.1.min.js:2)
    at Ut (jquery-3.3.1.min.js:2)
    at k (jquery-3.3.1.min.js:2)
    at XMLHttpRequest.<anonymous> (jquery-3.3.1.min.js:2)
    at XMLHttpRequest.send (<anonymous>:1:781)
    at Object.send (jquery-3.3.1.min.js:2)
    at Function.ajax (jquery-3.3.1.min.js:2)
    at custom.js:15
m @ jquery-3.3.1.min.js:2
globalEval @ jquery-3.3.1.min.js:2
text script @ jquery-3.3.1.min.js:2
Ut @ jquery-3.3.1.min.js:2
k @ jquery-3.3.1.min.js:2
(anonymous) @ jquery-3.3.1.min.js:2
(anonymous) @ VM172:1
send @ jquery-3.3.1.min.js:2
ajax @ jquery-3.3.1.min.js:2
(anonymous) @ custom.js:15
load (async)
send @ jquery-3.3.1.min.js:2
ajax @ jquery-3.3.1.min.js:2
(anonymous) @ custom.js:15
custom.js:44 Uncaught ReferenceError: locationHashChanged is not defined
    at custom.js:44
(anonymous) @ custom.js:44
:8080/#/Setup:1 Application Cache Error event: Manifest fetch failed (6) http://192.168.0.11:8080/html5.appcache
(index):142 [Deprecation] Application Cache is deprecated in non-secure contexts, and will be restricted to secure contexts in M69, around September 2018. Please consider migrating your application to HTTPS, and eventually shifting over to Service Workers. See https://goo.gl/rStTGz for more details.
(anonymous) @ (index):142
onloadwff.js:58 Uncaught (in promise) TypeError: Cannot read property 'querySelectorAll' of null
    at t.getFormInputs (onloadwff.js:58)
    at t.<anonymous> (onloadwff.js:58)
    at onloadwff.js:58
    at Object.next (onloadwff.js:58)
    at onloadwff.js:58
    at new Promise (<anonymous>)
    at Proxy.__awaiter (onloadwff.js:58)
    at t.detectForm (onloadwff.js:58)
    at onloadwff.js:58
    at onloadwff.js:58
t.getFormInputs @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
__awaiter @ onloadwff.js:58
t.detectForm @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
onloadwff.js:58 Uncaught (in promise) TypeError: Cannot read property 'querySelectorAll' of null
    at t.getFormInputs (onloadwff.js:58)
    at t.<anonymous> (onloadwff.js:58)
    at onloadwff.js:58
    at Object.next (onloadwff.js:58)
    at onloadwff.js:58
    at new Promise (<anonymous>)
    at Proxy.__awaiter (onloadwff.js:58)
    at t.detectForm (onloadwff.js:58)
    at onloadwff.js:58
    at onloadwff.js:58
t.getFormInputs @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
__awaiter @ onloadwff.js:58
t.detectForm @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
(anonymous) @ onloadwff.js:58
VM172:1 GET http://192.168.0.11:8080/json.htm?type=command&param=getconfig 0 ()
(anonymous) @ VM172:1
send @ jquery-3.3.1.min.js:2
ajax @ jquery-3.3.1.min.js:2
$rootScope.GetGlobalConfig @ app.js:978
(anonymous) @ app.js:1075
invoke @ angular.min.js:44
(anonymous) @ angular.min.js:46
r @ angular.min.js:8
gb @ angular.min.js:46
c @ angular.min.js:22
Uc @ angular.min.js:22
(anonymous) @ angularAMD.min.js:26
l @ jquery-3.3.1.min.js:2
c @ jquery-3.3.1.min.js:2
setTimeout (async)
(anonymous) @ jquery-3.3.1.min.js:2
u @ jquery-3.3.1.min.js:2
add @ jquery-3.3.1.min.js:2
(anonymous) @ jquery-3.3.1.min.js:2
Deferred @ jquery-3.3.1.min.js:2
then @ jquery-3.3.1.min.js:2
w.fn.ready @ jquery-3.3.1.min.js:2
AngularAMD.bootstrap @ angularAMD.min.js:26
(anonymous) @ app.js:1243
execCb @ require.js:29
check @ require.js:18
(anonymous) @ require.js:23
(anonymous) @ require.js:8
(anonymous) @ require.js:23
v @ require.js:7
emit @ require.js:23
check @ require.js:19
enable @ require.js:23
init @ require.js:17
E @ require.js:14
completeLoad @ require.js:28
onScriptLoad @ require.js:29
load (async)
g.load @ require.js:34
load @ require.js:29
load @ require.js:18
(anonymous) @ require.js:17
(anonymous) @ require.js:8
execCb @ require.js:29
check @ require.js:18
(anonymous) @ require.js:23
(anonymous) @ require.js:8
(anonymous) @ require.js:23
v @ require.js:7
emit @ require.js:23
check @ require.js:19
enable @ require.js:23
init @ require.js:17
E @ require.js:14
completeLoad @ require.js:28
onScriptLoad @ require.js:29
load (async)
g.load @ require.js:34
load @ require.js:29
load @ require.js:18
fetch @ require.js:17
check @ require.js:19
enable @ require.js:23
enable @ require.js:27
(anonymous) @ require.js:23
(anonymous) @ require.js:8
v @ require.js:7
enable @ require.js:22
init @ require.js:17
(anonymous) @ require.js:26
setTimeout (async)
g.nextTick @ require.js:32
j @ require.js:26
fetch @ require.js:17
check @ require.js:19
enable @ require.js:23
enable @ require.js:27
(anonymous) @ require.js:23
(anonymous) @ require.js:8
v @ require.js:7
enable @ require.js:22
init @ require.js:17
E @ require.js:14
completeLoad @ require.js:28
onScriptLoad @ require.js:29
load (async)
g.load @ require.js:34
load @ require.js:29
load @ require.js:18
fetch @ require.js:17
check @ require.js:19
enable @ require.js:23
enable @ require.js:27
(anonymous) @ require.js:23
(anonymous) @ require.js:8
v @ require.js:7
enable @ require.js:22
init @ require.js:17
(anonymous) @ require.js:26
setTimeout (async)
g.nextTick @ require.js:32
j @ require.js:26
configure @ require.js:25
requirejs @ require.js:31
g.config @ require.js:31
(anonymous) @ main.js:1
VM172:1 GET http://192.168.0.11:8080/json.htm?type=command&param=getversion 0 ()
(anonymous) @ VM172:1
send @ jquery-3.3.1.min.js:2
ajax @ jquery-3.3.1.min.js:2
(anonymous) @ app.js:1076
invoke @ angular.min.js:44
(anonymous) @ angular.min.js:46
r @ angular.min.js:8
gb @ angular.min.js:46
c @ angular.min.js:22
Uc @ angular.min.js:22
(anonymous) @ angularAMD.min.js:26
l @ jquery-3.3.1.min.js:2
c @ jquery-3.3.1.min.js:2
setTimeout (async)
(anonymous) @ jquery-3.3.1.min.js:2
u @ jquery-3.3.1.min.js:2
add @ jquery-3.3.1.min.js:2
(anonymous) @ jquery-3.3.1.min.js:2
Deferred @ jquery-3.3.1.min.js:2
then @ jquery-3.3.1.min.js:2
w.fn.ready @ jquery-3.3.1.min.js:2
AngularAMD.bootstrap @ angularAMD.min.js:26
(anonymous) @ app.js:1243
execCb @ require.js:29
check @ require.js:18
(anonymous) @ require.js:23
(anonymous) @ require.js:8
(anonymous) @ require.js:23
v @ require.js:7
emit @ require.js:23
check @ require.js:19
enable @ require.js:23
init @ require.js:17
E @ require.js:14
completeLoad @ require.js:28
onScriptLoad @ require.js:29
load (async)
g.load @ require.js:34
load @ require.js:29
load @ require.js:18
(anonymous) @ require.js:17
(anonymous) @ require.js:8
execCb @ require.js:29
check @ require.js:18
(anonymous) @ require.js:23
(anonymous) @ require.js:8
(anonymous) @ require.js:23
v @ require.js:7
emit @ require.js:23
check @ require.js:19
enable @ require.js:23
init @ require.js:17
E @ require.js:14
completeLoad @ require.js:28
onScriptLoad @ require.js:29
load (async)
g.load @ require.js:34
load @ require.js:29
load @ require.js:18
fetch @ require.js:17
check @ require.js:19
enable @ require.js:23
enable @ require.js:27
(anonymous) @ require.js:23
(anonymous) @ require.js:8
v @ require.js:7
enable @ require.js:22
init @ require.js:17
(anonymous) @ require.js:26
setTimeout (async)
g.nextTick @ require.js:32
j @ require.js:26
fetch @ require.js:17
check @ require.js:19
enable @ require.js:23
enable @ require.js:27
(anonymous) @ require.js:23
(anonymous) @ require.js:8
v @ require.js:7
enable @ require.js:22
init @ require.js:17
E @ require.js:14
completeLoad @ require.js:28
onScriptLoad @ require.js:29
load (async)
g.load @ require.js:34
load @ require.js:29
load @ require.js:18
fetch @ require.js:17
check @ require.js:19
enable @ require.js:23
enable @ require.js:27
(anonymous) @ require.js:23
(anonymous) @ require.js:8
v @ require.js:7
enable @ require.js:22
init @ require.js:17
(anonymous) @ require.js:26
setTimeout (async)
g.nextTick @ require.js:32
j @ require.js:26
configure @ require.js:25
requirejs @ require.js:31
g.config @ require.js:31
(anonymous) @ main.js:1
VM172:1 GET http://192.168.0.11:8080/json.htm?type=command&param=getauth 0 ()
(anonymous) @ VM172:1
send @ jquery-3.3.1.min.js:2
ajax @ jquery-3.3.1.min.js:2
(anonymous) @ app.js:1108
invoke @ angular.min.js:44
(anonymous) @ angular.min.js:46
r @ angular.min.js:8
gb @ angular.min.js:46
c @ angular.min.js:22
Uc @ angular.min.js:22
(anonymous) @ angularAMD.min.js:26
l @ jquery-3.3.1.min.js:2
c @ jquery-3.3.1.min.js:2
setTimeout (async)
(anonymous) @ jquery-3.3.1.min.js:2
u @ jquery-3.3.1.min.js:2
add @ jquery-3.3.1.min.js:2
(anonymous) @ jquery-3.3.1.min.js:2
Deferred @ jquery-3.3.1.min.js:2
then @ jquery-3.3.1.min.js:2
w.fn.ready @ jquery-3.3.1.min.js:2
AngularAMD.bootstrap @ angularAMD.min.js:26
(anonymous) @ app.js:1243
execCb @ require.js:29
check @ require.js:18
(anonymous) @ require.js:23
(anonymous) @ require.js:8
(anonymous) @ require.js:23
v @ require.js:7
emit @ require.js:23
check @ require.js:19
enable @ require.js:23
init @ require.js:17
E @ require.js:14
completeLoad @ require.js:28
onScriptLoad @ require.js:29
load (async)
g.load @ require.js:34
load @ require.js:29
load @ require.js:18
(anonymous) @ require.js:17
(anonymous) @ require.js:8
execCb @ require.js:29
check @ require.js:18
(anonymous) @ require.js:23
(anonymous) @ require.js:8
(anonymous) @ require.js:23
v @ require.js:7
emit @ require.js:23
check @ require.js:19
enable @ require.js:23
init @ require.js:17
E @ require.js:14
completeLoad @ require.js:28
onScriptLoad @ require.js:29
load (async)
g.load @ require.js:34
load @ require.js:29
load @ require.js:18
fetch @ require.js:17
check @ require.js:19
enable @ require.js:23
enable @ require.js:27
(anonymous) @ require.js:23
(anonymous) @ require.js:8
v @ require.js:7
enable @ require.js:22
init @ require.js:17
(anonymous) @ require.js:26
setTimeout (async)
g.nextTick @ require.js:32
j @ require.js:26
fetch @ require.js:17
check @ require.js:19
enable @ require.js:23
enable @ require.js:27
(anonymous) @ require.js:23
(anonymous) @ require.js:8
v @ require.js:7
enable @ require.js:22
init @ require.js:17
E @ require.js:14
completeLoad @ require.js:28
onScriptLoad @ require.js:29
load (async)
g.load @ require.js:34
load @ require.js:29
load @ require.js:18
fetch @ require.js:17
check @ require.js:19
enable @ require.js:23
enable @ require.js:27
(anonymous) @ require.js:23
(anonymous) @ require.js:8
v @ require.js:7
enable @ require.js:22
init @ require.js:17
(anonymous) @ require.js:26
setTimeout (async)
g.nextTick @ require.js:32
j @ require.js:26
configure @ require.js:25
requirejs @ require.js:31
g.config @ require.js:31
(anonymous) @ main.js:1
 
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | RFxcom | Dashticz V2

User avatar
EdddieN
Posts: 543
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Monday 17 September 2018 16:29

uh! that goes way beyond my knowledge... hopefully someone else can help
11101101 - www.machinon.com

User avatar
EdwinK
Posts: 1382
Joined: Sunday 22 January 2017 22:46
Target OS: Raspberry Pi
Domoticz version: BETA
Location: Rhoon
Contact:

Re: machinon theme

Post by EdwinK » Monday 17 September 2018 22:43

Will find out, some day, some how
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | RFxcom | Dashticz V2

User avatar
EdddieN
Posts: 543
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Wednesday 19 September 2018 23:21

I have uploaded a few files to zeplin, still working with the white theme mostly. I want to make sure all is perfect before focusing on the dark version.

The settings page looks nice, but still sometimes takes me a a few seconds to figure out where I am. Would a screen like this help?
Screen Shot 2018-09-19 at 22.17.56.png
Screen Shot 2018-09-19 at 22.17.56.png (130.33 KiB) Viewed 584 times
11101101 - www.machinon.com

Holland
Posts: 353
Joined: Friday 12 July 2013 13:53
Target OS: Raspberry Pi
Domoticz version: Beta Ch
Location: The Netherlands
Contact:

Re: machinon theme

Post by Holland » Wednesday 19 September 2018 23:56

EdddieN wrote:
Wednesday 19 September 2018 23:21
I have uploaded a few files to zeplin, still working with the white theme mostly. I want to make sure all is perfect before focusing on the dark version.

The settings page looks nice, but still sometimes takes me a a few seconds to figure out where I am. Would a screen like this help?
Screen Shot 2018-09-19 at 22.17.56.png
Much better!!

User avatar
bueno79
Posts: 96
Joined: Wednesday 08 March 2017 11:26
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: France
Contact:

Re: machinon theme

Post by bueno79 » Thursday 20 September 2018 8:57

hi,

really nice. It is possible to group device in your theme ? And do you manage camera in dashboard ?

best regards
Bueno

User avatar
EdddieN
Posts: 543
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Thursday 20 September 2018 9:50

Re camera, would like to

Re group, what do you mean?
11101101 - www.machinon.com

User avatar
bueno79
Posts: 96
Joined: Wednesday 08 March 2017 11:26
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: France
Contact:

Re: machinon theme

Post by bueno79 » Thursday 20 September 2018 10:06

hi,

the possibility to display camera on the dashboard. For the grouping :

if you take air cooling system, to manage a such device you need :
- mode selector (on, off, hot, cold, dry,..)
- flow selector (auto, night, power1, power2,power3, ...)
- temp selector

mode and flow selector are in "switch" section but Temp selector is in "utility" section...it is very annoying. So if we can merge multiple device in one place or one big control it will be awesome.

Another exemple is power for plug..we have multiple in utility. Could be awesome to merge different in one. Aurora theme started to work on this point but it was not enough

Personnaly I think Domoticz is a ver very good product but the current frontend is not good enough.

best regards

User avatar
EdddieN
Posts: 543
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Thursday 20 September 2018 11:15

I see, it looks more like a front end app on itself than a theme.

Aurora does it on the dashboard correct?
11101101 - www.machinon.com

User avatar
bueno79
Posts: 96
Joined: Wednesday 08 March 2017 11:26
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: France
Contact:

Re: machinon theme

Post by bueno79 » Thursday 20 September 2018 12:52

yes it is.

landaisbenj
Posts: 150
Joined: Wednesday 02 August 2017 18:12
Target OS: Raspberry Pi
Domoticz version: stable
Location: France
Contact:

Re: machinon theme

Post by landaisbenj » Thursday 20 September 2018 12:57

My work re open my domoticz !!! :o :o :P :P
Platforme: Rpbi3b
Domoticz: Last stable
Bridge: RFLINK last stable

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests