sensor type lighting 5 kangtai/cotech door contact

Post Reply
Sticz
Posts: 2
Joined: Tuesday 29 May 2018 14:19
Target OS: Raspberry Pi
Domoticz version:
Contact:

sensor type lighting 5 kangtai/cotech door contact

Post by Sticz » Tuesday 29 May 2018 14:34

He alle,

My cheap sensor type lighting 5 kangtai/cotech door contact connects automatically with rfxcom
But than it only shows last seen no other status change .. any suggestion what i can do to use the status within domoticz ?

https://www.aliexpress.com/item/Origina ... 77597.html

Sticz
Posts: 2
Joined: Tuesday 29 May 2018 14:19
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: sensor type lighting 5 kangtai/cotech door contact

Post by Sticz » Tuesday 29 May 2018 17:20

May work around is:
call the sensor a switch.
If the sensor is triggered it can switch an ON status to OFF.
So I used the timer to "arm" the sensor ( switch to ON)
Once triggered the timer will go to OFF and set action (email etc )

Any other bright ideas ?

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests