Raspbery start problem with rflink

433Mhz opensource Receiver & Transmitter.

Moderator: Stuntteam

Post Reply
marktn
Posts: 53
Joined: Tuesday 21 April 2015 21:39
Target OS: Windows
Domoticz version:
Contact:

Raspbery start problem with rflink

Post by marktn » Saturday 17 February 2018 18:16

Hello,

My raspberry isn't starting when the rflink is connected.
When i first start my raspberrry, and after a minute connected the rflink there is no problem.

On my old raspberry i did not hat that problem.

Mark

freijn
Posts: 400
Joined: Friday 23 December 2016 17:40
Target OS: Raspberry Pi
Domoticz version:
Location: Netherlands Purmerend
Contact:

Re: Raspbery start problem with rflink

Post by freijn » Saturday 17 February 2018 22:39

Mark,

First thing I can think of is an power issue.. You upgrade to a newer raspberry but this one is consuming more power.

Please try a better power supply as a test?

Good luck

Frank

marktn
Posts: 53
Joined: Tuesday 21 April 2015 21:39
Target OS: Windows
Domoticz version:
Contact:

Re: Raspbery start problem with rflink

Post by marktn » Wednesday 21 February 2018 23:07

freijn wrote:
Saturday 17 February 2018 22:39
Mark,

First thing I can think of is an power issue.. You upgrade to a newer raspberry but this one is consuming more power.

Please try a better power supply as a test?

Good luck

Frank
Problem still the same.

Mark

freijn
Posts: 400
Joined: Friday 23 December 2016 17:40
Target OS: Raspberry Pi
Domoticz version:
Location: Netherlands Purmerend
Contact:

Re: Raspbery start problem with rflink

Post by freijn » Thursday 22 February 2018 17:06

ok,

back to basic if you connect a HMDI screen.. does it show anything? What is the definition of not starting?

DutchHans
Posts: 356
Joined: Friday 03 April 2015 20:44
Target OS: Raspberry Pi
Domoticz version:
Location: Germany (near dutch border)
Contact:

Re: Raspbery start problem with rflink

Post by DutchHans » Thursday 22 February 2018 17:47

Similar here... When I boot with RF-link connected I have not one Z-wave device showing up... When I unplug the RF-link and boot..all Z-wave devices are showing..after that plug the RF-link in and everything is ok... i can live with that, but its not ideal... specially when the RPI needs a reboot and I am not home...

Cheers, Hans

User avatar
Stuntteam
Posts: 437
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Raspbery start problem with rflink

Post by Stuntteam » Thursday 22 February 2018 21:26

Did you make the USB slots persistent?
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

marktn
Posts: 53
Joined: Tuesday 21 April 2015 21:39
Target OS: Windows
Domoticz version:
Contact:

Re: Raspbery start problem with rflink

Post by marktn » Saturday 24 February 2018 15:57

Stuntteam wrote:
Thursday 22 February 2018 21:26
Did you make the USB slots persistent?
What do you mean with that?

Mark

SweetPants
Posts: 2392
Joined: Friday 12 July 2013 21:24
Target OS: Linux
Domoticz version: V4.10267
Location: The Netherlands
Contact:

Re: Raspbery start problem with rflink

Post by SweetPants » Saturday 24 February 2018 16:04

marktn wrote:
Saturday 24 February 2018 15:57
Stuntteam wrote:
Thursday 22 February 2018 21:26
Did you make the USB slots persistent?
What do you mean with that?

Mark
Google for "Raspberry USB persistence" or got to https://www.domoticz.com/wiki/PersistentUSBDevices
Ubuntu 16.04.5 LTS, Intel NUC, MySensors 2.3.0-alpha, Pro Mini 3.3/8M RFM69(HW), ESP8266 (SDK2.2.0), Sonoff, RFLink, RFXcom, MQTT, NodeRed, Domoticz Beta (from source)

marktn
Posts: 53
Joined: Tuesday 21 April 2015 21:39
Target OS: Windows
Domoticz version:
Contact:

Re: Raspbery start problem with rflink

Post by marktn » Saturday 24 February 2018 21:45

Google for "Raspberry USB persistence" or got to https://www.domoticz.com/wiki/PersistentUSBDevices
Is see in the wiki mult device's but not a rflink? Or are the RFX-433 settings the same?

freijn
Posts: 400
Joined: Friday 23 December 2016 17:40
Target OS: Raspberry Pi
Domoticz version:
Location: Netherlands Purmerend
Contact:

Re: Raspbery start problem with rflink

Post by freijn » Saturday 24 February 2018 21:50

He wrote that after the Raspberry is started and reconnect its working. So to my understanding nothing with persistence, I am still thinking its power.

Or, is connecting the USB after power-up resolving/overrule the perstence issue? Please help me understand..

Frank

marktn
Posts: 53
Joined: Tuesday 21 April 2015 21:39
Target OS: Windows
Domoticz version:
Contact:

Re: Raspbery start problem with rflink

Post by marktn » Saturday 24 February 2018 23:43

freijn wrote:
Saturday 24 February 2018 21:50
He wrote that after the Raspberry is started and reconnect its working. So to my understanding nothing with persistence, I am still thinking its power.

Or, is connecting the USB after power-up resolving/overrule the perstence issue? Please help me understand..

Frank
To make it work. First i start the raspberry. After a minute i connect the rflink.
I am using only a RFlink on my raspberry
Already changed the power.

Mark

User avatar
Stuntteam
Posts: 437
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Raspbery start problem with rflink

Post by Stuntteam » Tuesday 27 February 2018 0:54

Did you also try a different USB cable?
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

marktn
Posts: 53
Joined: Tuesday 21 April 2015 21:39
Target OS: Windows
Domoticz version:
Contact:

Re: Raspbery start problem with rflink

Post by marktn » Tuesday 27 February 2018 19:29

No i didn't. But i made a test, same problem.

Also tried another hardware, my old Nodo. Same problem.

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests