Aluprof DC305A

Post Reply
User avatar
tcviper
Posts: 172
Joined: Monday 30 June 2014 13:34
Target OS: Raspberry Pi
Domoticz version:
Location: Netherlands
Contact:

Aluprof DC305A

Post by tcviper » Tuesday 21 August 2018 12:56

Hello all,

Today we got a Aluprof DC305A (Remote) installed with our Sunscreen. It uses RTS on 433Mhz (CR2430). Any idea how to control it with Domoticz? I tried RFY and RFY-2 but it doesnt respond to that when I click the P2 (Pair) button on the remote.

Thanks

Update: heb deze uiteindelijk via RFXManager moeten koppelen met het confirm commando via Blinds T6. Daarna werkt het in Domoticz ook.

b_weijenberg
Posts: 694
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Aluprof DC305A

Post by b_weijenberg » Tuesday 21 August 2018 14:30

Is this remote received in the latest RFXmngr and the latest Pro1 firmware?
RFXtrx433, RFXtrx433E, RFXtrx433XL

mvroosmalen
Posts: 20
Joined: Saturday 03 December 2016 17:36
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Aluprof DC305A

Post by mvroosmalen » Wednesday 22 August 2018 15:28

Yes it is I've tested it (Pro1) yesterday and the remote code is captured via the RFXManager, but the firmware is not supported in Domoticz. No clue why....As mentioned by others you can transmit via the learning steps.
for example: https://ehoco.nl/elektrisch-rolgordijn- ... n-domoticz

If someone is able to integrate the Pro1 firmware in Domoticz, let us know :D

Mark

Update:
Something went wrong using the flash update program on my PC, however after using the update option in Domoticz (setup>Hardware>RFxCom, set mode>Upgrade Firmware) I successfully upgraded the RFxCom with the Pro1 firmware and can add the DC305A via the learning option in Domoticz. Now Domoticz detects open or close (stop) commando's of the remote and can be used to send commands to open/close/stop. Perfect!!

Thanks to the makers!!! Good job. :D

Mark

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest