Dashticz login

Dashticz, alternative dashboard based on HTML, CSS, jQuery

Moderators: robgeerts, htilburgs

Post Reply
Dave47
Posts: 12
Joined: Thursday 19 July 2018 14:36
Target OS: -
Domoticz version: 4.9700
Contact:

Dashticz login

Post by Dave47 » Thursday 19 July 2018 14:48

We try to make a login page to Dashticz.

In Domoticz i setup username and password for webpage protection.
I use the above " and password in Dasticz in the following way:

config['user_name'] = 'username Domoticz';
config['pass_word'] = 'password Domoticz';
config['loginEnabled'] = 1;


There is no login page when I open the Dashticz page?
what am I doing wrong?

More explanation:

We have done port forwarding so that we can reach domoticz externally.
Website protection set for domoticz, that works.
You can still open all subfolders even dashticz

The solution for the daschticz folder

config['user_name'] = 'username Domoticz';
config['pass_word'] = 'password Domoticz';
config['loginEnabled'] = 1;

does not work.

You can still open all subfolders


Is there a way to secure dashticz?

Dave47
Posts: 12
Joined: Thursday 19 July 2018 14:36
Target OS: -
Domoticz version: 4.9700
Contact:

Re: Dashticz login

Post by Dave47 » Tuesday 24 July 2018 12:43

Nobody?

User avatar
DewGew
Posts: 259
Joined: Thursday 21 April 2016 12:01
Target OS: Raspberry Pi
Domoticz version: V4.9741
Location: Sweden
Contact:

Re: Dashticz login

Post by DewGew » Tuesday 24 July 2018 18:03

Try to clear cache and remove cookies in your browser
Raspberry Pi 2B - domoticz - Aeon Labs Z-Stick GEN5 - RFlink gateway
NanoPi NEO-air - domoticz - REGO6XX interface
Dashticz V2 - Homebridge

User avatar
mAiden88
Posts: 58
Joined: Friday 14 October 2016 22:15
Target OS: Raspberry Pi
Domoticz version: 3.7286
Location: Almelo
Contact:

Re: Dashticz login

Post by mAiden88 » Tuesday 24 July 2018 18:48

Try this?

Code: Select all

config['user_name'] = 'domoticz username';
config['pass_word'] = 'domoticz password';
config['loginEnabled'] = 1;
Pay attention. Domoticz should be at the forefront than username or password
Anyone can build a fast processor. The trick is to build a fast system.

Dave47
Posts: 12
Joined: Thursday 19 July 2018 14:36
Target OS: -
Domoticz version: 4.9700
Contact:

Re: Dashticz login

Post by Dave47 » Wednesday 25 July 2018 13:33

Code: Select all

config['user_name'] = 'domoticz Myusername';
config['pass_word'] = 'domoticz Mypassword';
config['loginEnabled'] = 1;
this does not work
Try to clear cache and remove cookies in your browser

User avatar
mAiden88
Posts: 58
Joined: Friday 14 October 2016 22:15
Target OS: Raspberry Pi
Domoticz version: 3.7286
Location: Almelo
Contact:

Re: Dashticz login

Post by mAiden88 » Wednesday 25 July 2018 13:50

Dave47 wrote:
Wednesday 25 July 2018 13:33

Code: Select all

config['user_name'] = 'domoticz Myusername';
config['pass_word'] = 'domoticz Mypassword';
config['loginEnabled'] = 1;
this does not work
Try to clear cache and remove cookies in your browser
What i post, i try it by myself. Its working here.
Look @ attchments.
Attachments
dash2.png
dash2.png (6.73 KiB) Viewed 474 times
dash.png
dash.png (35.14 KiB) Viewed 474 times
Anyone can build a fast processor. The trick is to build a fast system.

Dave47
Posts: 12
Joined: Thursday 19 July 2018 14:36
Target OS: -
Domoticz version: 4.9700
Contact:

Re: Dashticz login

Post by Dave47 » Wednesday 25 July 2018 14:59

Dashticz link looks like http://xx.xxx.xx.xx:8080/dashticz/ that is not protected here
Domoticz link: i have http://xx.xxx.xx.xx:8080

I dont understand.
Myusername is that the username from website protection?

Example:

Website protection:

Username = user
Password = pass

than the code is:

Code: Select all

config['user_name'] = 'domoticz user';
config['pass_word'] = 'domoticz pass';
config['loginEnabled'] = 1;
I have settings for local netwerk no username/password only for local ip

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests