Dashticz - General Discussions

Dashticz, alternative dashboard based on HTML, CSS, jQuery

Moderators: robgeerts, htilburgs

renerene
Posts: 137
Joined: Wednesday 03 August 2016 11:36
Target OS: -
Domoticz version:
Contact:

Re: Dashticz - General Discussions

Post by renerene » Tuesday 16 January 2018 23:24

What do you think: turn the screen off or keep it on?
How does the screen last over months/years when always on? Power consumption?
Question
I'm thinking about buying a full license for my domotica tablet for using the camera/motion wake up option. Befor I do so: Can you tell if the screen switches off (low power consumption) or is turned dark or just uses screensaver in the sleep condition?

Answer from https://www.fully-kiosk.com:
you have both options in Fully Kiosk. You can configure to switch the screen off after some idle time or just dim (by putting dim:0 in Screensaver URL). Look for both in Device Management settings in Fully. Note that both will not make any energy profit as the camera consumes usually more than the screen when running permanently for motion detection.
Alexey

Wob76
Posts: 129
Joined: Wednesday 19 April 2017 6:31
Target OS: Linux
Domoticz version:
Contact:

Re: Dashticz - General Discussions

Post by Wob76 » Wednesday 17 January 2018 7:57

Wob76 wrote:
Tuesday 16 January 2018 0:57
Hi,

My main issue is but the 2 switch devices look slightly different do to col-data, one being "col-xs-8 col-data" and the other "col-xs-10 col-data", I have tried a few things without success, could someone guide me on how I could change the -8 ones to be -10?

Current look
lights.JPG

Thanks,
Wob
I found a solution to my problem, I added the following to custom.css to change the width of the title.

div.mh.transbg.block_239.col-xs-3.hover > div.col-xs-8.col-data,
div.mh.transbg.block_108.col-xs-3.hover > div.col-xs-8.col-data {
width: 83.33333333% !important;
}

Wob76
Posts: 129
Joined: Wednesday 19 April 2017 6:31
Target OS: Linux
Domoticz version:
Contact:

Re: Dashticz - General Discussions

Post by Wob76 » Thursday 18 January 2018 4:28

Wob76 wrote:
Tuesday 16 January 2018 0:57
Hi,

I am looking to make all my lights look\function the same, 2 of them a switch devices, so look different, the rest have had the sliders dimmed. I have made all my lights hover\clickable, as I prefer that over just clicking the light globe, I did this with a function that did the following.

Code: Select all

function getStatus_119(idx,value,device){
        $('div.block_'+idx).addClass('hover');
        $('div.block_'+idx).attr('onclick', 'switchDevice(this)');
}
Hi,

I now have the issue that both the square AND the bulb are clickable, so if I click on the bulb I send 2 clicks, so I am trying to remove the click from the child object, but I just can't seem to select it, I have tried various things without success.

This line will work but I can't get a variable inside it so I can call it multiple times.
$('div.block_119 > [data-light]').removeAttr('onclick');

I have tried, the follow and more,
$('div.block_'+idx+' > [data-light]').removeAttr('onclick');
$('div.block_'+idx).children().removeAttr('onclick');
$('div.block_'+idx).find('*').removeAttr('onclick');
$('div.block_'+idx).find('[data-light]').removeAttr('onclick');

I am sure I am doing something simple wrong, anyone able to help?

Thanks,
Wob

User avatar
htilburgs
Posts: 509
Joined: Tuesday 03 November 2015 12:01
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Dashticz - General Discussions - WIKI update

Post by htilburgs » Friday 19 January 2018 12:35

jake wrote:
Thursday 11 January 2018 22:59
jake wrote:Today I found time to prepare a fresh Dashticz on the sideline of my 'old' Dashticz that is from July 2017. Many things have changed/updated/improved, so I copied CONFIG.js and started modifying that according to the Dashticz WIKI.

Since I really needed it to get everything working 'the new way', I came across some outdated pieces of information, that obviously haven't been updated in the 'heat of the battle'. No offence, but since I came across them anyhow, I will mention them here for review and update of the WIKI:

http://www.domoticz.com/wiki/Dashticz_V2_-_Installation
config['language']
- some languages are missing and in Sweden Sw should be Sv

http://www.domoticz.com/wiki/Dashticz_V ... figuration
config['calendarlanguage'] = 'nl_NL';
- variable not explained, but seems to control weather dates and garbage pickup dates language. Was quite confusing, since I had a mix of Dutch/English w/o this variable

config['calendarurl'] = 0;
-variable not explained, no idea

config['hide_topbar']
- Topbar setup only referenced at the 'Custom applications' http://www.domoticz.com/wiki/Dashticz_V ... plications
-- Either link to that section or move it from 'Custom applicatons' to Configuration or Positioning, since it isn't that of a niche, but an important 'block'
-- Or explain the topbar in more detail

config['app_title']
- Seems to be part of the Topbar, but not mentioned as so. The block definition calls it Logo?

http://www.domoticz.com/wiki/Dashticz_V ... dby_Screen
Standby Screen
- var _STANDBY_AFTER_MINUTES still the old variable definition

http://www.domoticz.com/wiki/Dashticz_V ... plications
Garbage collector
- Variables not explained
- Actual supported garbage companies not mentioned, I found them here: http://www.domoticz.com/forum/viewtopic ... 32#p132882
- I thought that in the garbage config, the original names like gft and rest had to reflect the garbage company way of naming them, so I changed gft into Gft and rest in Rest. The Garbage block didn't work, until I reverted both to gft and rest. Might be added to the explanation that these 'words' shoulnd't be modified (I read in the forum that these words check for multiple synonyms that the different garbage companies use)
Topbar
- Variables not explained
- Logo = app title variable?
- miniclock = date and actual time?
- settings = variable settings = settings + full screen?
- sunrise seems also to be an option, I found in the forum. Is not yet mentioned here

Settings 'on screen' don't 'stick' after 'Save', the site reloads, but the setting remain the 'old ones'. CONFIG.js is also not modified, although it takes all actual values from that file

Except the 'Settings' issue described above, I was able to get everything up and running again, so I don't need further explanation in this topic, but I hope someone with the rights to edit, will update the WIKI.

UPDATE 28-12-17:
The config describes Google Map parameters (the Wiki doesn't describe what to do with them), but I just found in the forum another way of adding the GM to the dashboard:
var maps = {}
maps.location = { height: 800, width:12, latitude: 40.4989948, longitude: -3.6610076, zoom:15 }

and used in:
columns[3] = {}
columns[3]['blocks'] = [maps.location]

I used to use columns[3]['blocks'] = ['trafficmap']
Is there a better place where I can post the proposal for Wiki improvements? I just checked the wiki and the information has not been updated yet.
@Jake, login to the Wiki is restored this morning by Gizmocuz.
I've updated the Wiki (as best as I can ;) )
Hardware:
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3

jake
Posts: 458
Joined: Saturday 30 May 2015 22:40
Target OS: Raspberry Pi
Domoticz version: beta
Contact:

Re: Dashticz - General Discussions - WIKI update

Post by jake » Friday 19 January 2018 17:29

htilburgs wrote:
Friday 19 January 2018 12:35
@Jake, login to the Wiki is restored this morning by Gizmocuz.
I've updated the Wiki (as best as I can ;) )
Excellent, I went through all proposals and you did a good job! I was now also able to edit the wiki myself, so I updated or clarified some little things.

User avatar
htilburgs
Posts: 509
Joined: Tuesday 03 November 2015 12:01
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Dashticz - General Discussions - WIKI update

Post by htilburgs » Saturday 20 January 2018 11:59

jake wrote:
Friday 19 January 2018 17:29
htilburgs wrote:
Friday 19 January 2018 12:35
@Jake, login to the Wiki is restored this morning by Gizmocuz.
I've updated the Wiki (as best as I can ;) )
Excellent, I went through all proposals and you did a good job! I was now also able to edit the wiki myself, so I updated or clarified some little things.
Nice! :D
Hardware:
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3

aiolos
Posts: 129
Joined: Sunday 13 September 2015 18:58
Target OS: Raspberry Pi
Domoticz version: stable
Location: Sale, UK
Contact:

Re: Dashticz - General Discussions

Post by aiolos » Saturday 20 January 2018 21:28

Good work in updating the wiki! Thanks! (I might change a lot of functionality, but I'm not the best in updating documentation...)

Small remark: Not all configuration for the garbage is necessary. This is the case on more places, it might be worth to notice that somehow.
Contributor to Dashticz
More on my Github profile

10us
Posts: 7
Joined: Monday 22 January 2018 2:18
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Dashticz - General Discussions

Post by 10us » Monday 22 January 2018 2:24

After editing a lot of hours my first Dashticz dashboard is nearly ready. Is it possible to change the background of the standby screen? I think I can do this in the custom CSS, but i'm a noob in CSS editing..... Can someone tell me how i can get a black background on the standby screen? (the standard screen is greyed ?) Because of using my iPad on the wall i need a black screen as background. My blocks were also black as background with white text.

Thanx a lot for your help!
When my project is finished i will share my dashboard here for comments and ideas.

User avatar
DewGew
Posts: 259
Joined: Thursday 21 April 2016 12:01
Target OS: Raspberry Pi
Domoticz version: V4.9741
Location: Sweden
Contact:

Re: Dashticz - General Discussions

Post by DewGew » Monday 22 January 2018 9:13

10us wrote:
Monday 22 January 2018 2:24
After editing a lot of hours my first Dashticz dashboard is nearly ready. Is it possible to change the background of the standby screen? I think I can do this in the custom CSS, but i'm a noob in CSS editing..... Can someone tell me how i can get a black background on the standby screen? (the standard screen is greyed ?) Because of using my iPad on the wall i need a black screen as background. My blocks were also black as background with white text.

Thanx a lot for your help!
When my project is finished i will share my dashboard here for comments and ideas.
Just put this in your custom.css or yourtheme.css:

Code: Select all

.standby .swiper-slide {
	background-color:#000000;
}
Raspberry Pi 2B - domoticz - Aeon Labs Z-Stick GEN5 - RFlink gateway
NanoPi NEO-air - domoticz - REGO6XX interface
Dashticz V2 - Homebridge

10us
Posts: 7
Joined: Monday 22 January 2018 2:18
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Dashticz - General Discussions

Post by 10us » Monday 22 January 2018 10:02

DewGew wrote:
Monday 22 January 2018 9:13
10us wrote:
Monday 22 January 2018 2:24
After editing a lot of hours my first Dashticz dashboard is nearly ready. Is it possible to change the background of the standby screen? I think I can do this in the custom CSS, but i'm a noob in CSS editing..... Can someone tell me how i can get a black background on the standby screen? (the standard screen is greyed ?) Because of using my iPad on the wall i need a black screen as background. My blocks were also black as background with white text.

Thanx a lot for your help!
When my project is finished i will share my dashboard here for comments and ideas.
Just put this in your custom.css or yourtheme.css:

Code: Select all

.standby .swiper-slide {
	background-color:#000000;
}
Thanx! That does the trick!
:lol:

User avatar
gielie
Posts: 225
Joined: Tuesday 12 January 2016 12:40
Target OS: Raspberry Pi
Domoticz version: latest β
Location: The Netherlands (Alkmaar)
Contact:

Re: Dashticz - General Discussions

Post by gielie » Monday 22 January 2018 17:12

Id like to change the way my selector switch is displayed, now it looks like this.
Image

Id like to change the color of the selected tile in the selector switch so it becomes more clear which one is selected, how can i do that?
- Vision ZU1401 USB Stick
- Aeotec MultiSensor 6
- FIBARO FGS222
- FIBARO FGWPE Wall Plug
- Everspring AN157
- Neo CoolCam Power plug
- Neo CoolCam PIR Sensor
- Popp Smoke Detector
- Toon
- Kodi Media Server

User avatar
robgeerts
Posts: 1239
Joined: Saturday 24 January 2015 23:12
Target OS: NAS (Synology & others)
Domoticz version: 3.7067
Location: NL
Contact:

Re: Dashticz - General Discussions

Post by robgeerts » Monday 22 January 2018 22:26

You could add this to custom.css

Code: Select all

label.btn.btn-default.active {
    background-color: #aaa !important;
    border-color: #aaa !important;
}
Creator of Dashticz
Do you appreciate my work and want to buy me a beer?
Send:
- XVG to D8fwNbyV6YxJk1aSiXftWTtdaPipsKn2Fa
- ANY ERC20-TOKEN to 0x9b8ee84329d77765a28bca188218c6c793875a8a

or donate via PayPal: https://www.paypal.me/robgeerts

jeroenkl
Posts: 59
Joined: Sunday 14 July 2013 22:00
Target OS: NAS (Synology & others)
Domoticz version: beta
Location: NL
Contact:

Re: Dashticz - General Discussions

Post by jeroenkl » Tuesday 23 January 2018 21:09

robgeerts wrote:
Monday 22 January 2018 22:26
You could add this to custom.css

Code: Select all

label.btn.btn-default.active {
    background-color: #aaa !important;
    border-color: #aaa !important;
}
thanks! Needed it as well

10us
Posts: 7
Joined: Monday 22 January 2018 2:18
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Dashticz - General Discussions

Post by 10us » Thursday 25 January 2018 0:32

Hi, when I use a frame on the standby screen, it becomes partly transparent (greyed out). I read in previous posts that it is a part of the design? Is it already possible (via custom css?) to overrule this? It would be nice if you can also place frames that are visible on a standby screen.
Schermafdruk 2018-01-24 22.52.51.png
Schermafdruk 2018-01-24 22.52.51.png (124.82 KiB) Viewed 1040 times

renerene
Posts: 137
Joined: Wednesday 03 August 2016 11:36
Target OS: -
Domoticz version:
Contact:

Re: Dashticz - General Discussions

Post by renerene » Thursday 25 January 2018 1:05

Offtopic: what is the use of standby screen?
Avoid burn-in? Power saving?

10us
Posts: 7
Joined: Monday 22 January 2018 2:18
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Dashticz - General Discussions

Post by 10us » Thursday 25 January 2018 1:14

renerene wrote:
Thursday 25 January 2018 1:05
Offtopic: what is the use of standby screen?
Avoid burn-in? Power saving?
Power saving and for minimalistic page design on my 24/7 wall tablet.

Mads
Posts: 31
Joined: Thursday 18 January 2018 21:57
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Dashticz - General Discussions

Post by Mads » Thursday 25 January 2018 17:38

hi. have some problems with my dashticz.

the first problem is:
If i use diffrent browser etc. my phone, safari (mac), chrome (mac), chrome (pc) none of the settings is saved. Every i connect with a new browser, it ask for settings. using the same ip in the browser, not index2.html

i have config the CONFIG.js

the second problem (for now :) )
is that i cant get the moonphases to work. nothing happend, when i load dashticz.
Attachments
Skærmbillede 2018-01-25 kl. 16.19.45.png
Skærmbillede 2018-01-25 kl. 16.19.45.png (21.61 KiB) Viewed 1000 times
Skærmbillede 2018-01-25 kl. 16.20.26.png
Skærmbillede 2018-01-25 kl. 16.20.26.png (39.87 KiB) Viewed 1000 times
Skærmbillede 2018-01-25 kl. 16.26.27.png
Skærmbillede 2018-01-25 kl. 16.26.27.png (322.33 KiB) Viewed 1000 times

Mads
Posts: 31
Joined: Thursday 18 January 2018 21:57
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Dashticz - General Discussions

Post by Mads » Thursday 25 January 2018 17:39

part 2
Attachments
Skærmbillede 2018-01-25 kl. 16.26.27.png
Skærmbillede 2018-01-25 kl. 16.26.27.png (322.33 KiB) Viewed 998 times
Skærmbillede 2018-01-25 kl. 16.37.48.png
Skærmbillede 2018-01-25 kl. 16.37.48.png (38.67 KiB) Viewed 998 times

JimmyH1969
Posts: 101
Joined: Tuesday 28 June 2016 16:38
Target OS: Windows
Domoticz version: Beta
Location: Amersfoort NL
Contact:

Re: Dashticz - General Discussions

Post by JimmyH1969 » Thursday 25 January 2018 17:47

I think you need to remove the "/*" at the beginning and end of the file.

Mads
Posts: 31
Joined: Thursday 18 January 2018 21:57
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Dashticz - General Discussions

Post by Mads » Thursday 25 January 2018 17:56

when i do that, the page wont load :/ have tried

Third problem.

Can´t make blocktitles :/ is there just somthing big wrong with my settings, nothing is happening :S :twisted:

Post Reply

Who is online

Users browsing this forum: ArthurNL, juuzo and 2 guests