Dashticz - General Discussions

Dashticz, alternative dashboard based on HTML, CSS, jQuery

Moderators: robgeerts, htilburgs

User avatar
htilburgs
Posts: 246
Joined: Tuesday 03 November 2015 12:01
Target OS: Raspberry Pi
Domoticz version: v3.7404
Location: Netherland
Contact:

Re: Dashticz - General Discussions

Postby htilburgs » Thursday 18 May 2017 19:54

I just made a clean install (Master version, not beta), copy CONFIG_DEFAULT.js to CONFIG.js, edit CONFIG.js with correct settings and for me it works out of the box.
Hardware:
Raspberry Pi 2B - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Yeelight RGBW Led

ropske
Posts: 186
Joined: Tuesday 12 August 2014 5:37
Target OS: Raspberry Pi
Domoticz version: V3_6235
Location: Rumbeke,Belgium
Contact:

Re: Dashticz - General Discussions

Postby ropske » Thursday 18 May 2017 19:56

mine is the beta, maybe i try with master version first

User avatar
htilburgs
Posts: 246
Joined: Tuesday 03 November 2015 12:01
Target OS: Raspberry Pi
Domoticz version: v3.7404
Location: Netherland
Contact:

Re: Dashticz - General Discussions

Postby htilburgs » Thursday 18 May 2017 19:57

If you've installed Dashticz in \domoticz\www\dashticz then normaly you give the Domoticz portnumber in the URL. In your case this would be:
http://192.168.1.175:8080/dashticz/index.html

This should work for beta and master. If you give me 1 minute I'm doing a fresh beta install.
Let me come back to you.
Hardware:
Raspberry Pi 2B - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Yeelight RGBW Led

ropske
Posts: 186
Joined: Tuesday 12 August 2014 5:37
Target OS: Raspberry Pi
Domoticz version: V3_6235
Location: Rumbeke,Belgium
Contact:

Re: Dashticz - General Discussions

Postby ropske » Thursday 18 May 2017 19:59

mine is not installed in domoticz\www\

it's installed in /var/www/html/dashticz/

ropske
Posts: 186
Joined: Tuesday 12 August 2014 5:37
Target OS: Raspberry Pi
Domoticz version: V3_6235
Location: Rumbeke,Belgium
Contact:

Re: Dashticz - General Discussions

Postby ropske » Thursday 18 May 2017 20:00

now i got this:

but i have a lot of temperatures added to my favorites, but dashticz does not show any of them
Attachments
Naamloos.jpg
Naamloos.jpg (86.85 KiB) Viewed 325 times

User avatar
htilburgs
Posts: 246
Joined: Tuesday 03 November 2015 12:01
Target OS: Raspberry Pi
Domoticz version: v3.7404
Location: Netherland
Contact:

Re: Dashticz - General Discussions

Postby htilburgs » Thursday 18 May 2017 20:03

Ok, but this is more than before...;-)
Maybe the temperatures are not recognized by Dashticz. Can you post the output of:
http://192.168.1.175:8080/json.htm?type=devices&filter=all&used=true&order=Name
Hardware:
Raspberry Pi 2B - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Yeelight RGBW Led

ropske
Posts: 186
Joined: Tuesday 12 August 2014 5:37
Target OS: Raspberry Pi
Domoticz version: V3_6235
Location: Rumbeke,Belgium
Contact:

Re: Dashticz - General Discussions

Postby ropske » Thursday 18 May 2017 20:05

its to much lol :D
some specific you want to see, know?

User avatar
htilburgs
Posts: 246
Joined: Tuesday 03 November 2015 12:01
Target OS: Raspberry Pi
Domoticz version: v3.7404
Location: Netherland
Contact:

Re: Dashticz - General Discussions

Postby htilburgs » Thursday 18 May 2017 20:06

Output of 1 or 2 temperatures devices??
I've looked in my case, the Pi temperature is also NOT showing for me.
Maybe only switches are shown by default....
Hardware:
Raspberry Pi 2B - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Yeelight RGBW Led

ropske
Posts: 186
Joined: Tuesday 12 August 2014 5:37
Target OS: Raspberry Pi
Domoticz version: V3_6235
Location: Rumbeke,Belgium
Contact:

Re: Dashticz - General Discussions

Postby ropske » Thursday 18 May 2017 20:08

"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 73,
"CustomImage" : 0,
"Data" : "22.3 C",
"Description" : "",
"Favorite" : 0,
"HardwareID" : 3,
"HardwareName" : "ZWAVE",
"HardwareType" : "OpenZWave USB",
"HardwareTypeVal" : 21,
"HaveTimeout" : false,
"ID" : "0901",
"LastUpdate" : "2017-05-18 19:59:57",
"Name" : "Kraan Living2",
"Notifications" : "false",
"PlanID" : "0",
"PlanIDs" : [ 0 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : "-",
"SubType" : "LaCrosse TX3",
"Temp" : 22.300000000000001,
"Timers" : "false",
"Type" : "Temp",
"TypeImg" : "temperature",
"Unit" : 1,
"Used" : 1,
"XOffset" : "0",
"YOffset" : "0",
"idx" : "62"

User avatar
htilburgs
Posts: 246
Joined: Tuesday 03 November 2015 12:01
Target OS: Raspberry Pi
Domoticz version: v3.7404
Location: Netherland
Contact:

Re: Dashticz - General Discussions

Postby htilburgs » Thursday 18 May 2017 20:14

This is not a device that's in your favorites.... (Favorite:0), so this should not show
Hardware:
Raspberry Pi 2B - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Yeelight RGBW Led

User avatar
htilburgs
Posts: 246
Joined: Tuesday 03 November 2015 12:01
Target OS: Raspberry Pi
Domoticz version: v3.7404
Location: Netherland
Contact:

Re: Dashticz - General Discussions

Postby htilburgs » Thursday 18 May 2017 20:15

I have to leave right now, but be back in about 1,5 hour.
If you still have the problem I try to pick it up further....
Hardware:
Raspberry Pi 2B - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Yeelight RGBW Led

ropske
Posts: 186
Joined: Tuesday 12 August 2014 5:37
Target OS: Raspberry Pi
Domoticz version: V3_6235
Location: Rumbeke,Belgium
Contact:

Re: Dashticz - General Discussions

Postby ropske » Thursday 18 May 2017 20:17

i added it now:


"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 73,
"CustomImage" : 0,
"Data" : "22.2 C",
"Description" : "",
"Favorite" : 1,
"HardwareID" : 3,
"HardwareName" : "ZWAVE",
"HardwareType" : "OpenZWave USB",
"HardwareTypeVal" : 21,
"HaveTimeout" : false,
"ID" : "0901",
"LastUpdate" : "2017-05-18 20:14:42",
"Name" : "Kraan Living2",
"Notifications" : "false",
"PlanID" : "0",
"PlanIDs" : [ 0 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : "-",
"SubType" : "LaCrosse TX3",
"Temp" : 22.199999999999999,
"Timers" : "false",
"Type" : "Temp",
"TypeImg" : "temperature",
"Unit" : 1,
"Used" : 1,
"XOffset" : "0",
"YOffset" : "0",
"idx" : "62"

User avatar
htilburgs
Posts: 246
Joined: Tuesday 03 November 2015 12:01
Target OS: Raspberry Pi
Domoticz version: v3.7404
Location: Netherland
Contact:

Re: Dashticz - General Discussions

Postby htilburgs » Friday 19 May 2017 6:59

I can't simulate this... Maybe the subtype is not recognized, but as I said, my Pi temperature isn't shown also in Favorites.
Try adding it to the CONFIG.js manualy using the wiki.
Hardware:
Raspberry Pi 2B - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Yeelight RGBW Led

poudenes
Posts: 136
Joined: Wednesday 08 March 2017 10:42
Target OS: Linux
Domoticz version: 3.7392
Location: Amsterdam
Contact:

Re: Dashticz - General Discussions

Postby poudenes » Friday 19 May 2017 8:08

htilburgs wrote:I can't simulate this... Maybe the subtype is not recognized, but as I said, my Pi temperature isn't shown also in Favorites.
Try adding it to the CONFIG.js manualy using the wiki.


Strange... My RPI temp is shown in dashticz. Beta and master version. Add motherboard sensors in domoticz and the devices add in dashticz


Verzonden vanaf mijn iPhone met Tapatalk Pro
Raspberry Pi3 - OSMC - Domoticz - Dashticz - MiPow PlayBulb - Nanolead Aurora - KaKu - Logitech Hamony - Nest - RFLink

User avatar
htilburgs
Posts: 246
Joined: Tuesday 03 November 2015 12:01
Target OS: Raspberry Pi
Domoticz version: v3.7404
Location: Netherland
Contact:

Re: Dashticz - General Discussions

Postby htilburgs » Friday 19 May 2017 9:23

Hi Poudenes, My RPI is shown when I add it manualy, but I was trying to help ropske when you do a clean install and only use favorites and auto position....;-)

(My dash is fully functioning with everything I like)!
Hardware:
Raspberry Pi 2B - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Yeelight RGBW Led

User avatar
HansieNL
Posts: 298
Joined: Monday 28 September 2015 15:13
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Dashticz - General Discussions

Postby HansieNL » Friday 19 May 2017 13:08

I wanna change the titles of my P1 elektra blocks blocks[274] = {} //Elektra (P1 USB) //2 blocks: '274_1' and '274_2'
Does someone know if this is possible?
Naamloos 1.jpg
Naamloos 1.jpg (7.91 KiB) Viewed 183 times
Domoticz on Raspberry Pi 2, Homey, Hue lights, Toon thermostat, Logitech Harmony Hub, Fibaro Wall Plug, Fibaro Push Buttons, LightWaveRF Mood Controller, Venz M9 running LibreELEC, Synology NAS

robgeerts
Posts: 724
Joined: Saturday 24 January 2015 23:12
Target OS: NAS (Synology & others)
Domoticz version: 3.6796
Location: The Netherlands
Contact:

Re: Dashticz - General Discussions

Postby robgeerts » Friday 19 May 2017 13:17

Should work since beta last night....

Code: Select all

blocks ['274_1']['title'] = 'mijntitel';

User avatar
HansieNL
Posts: 298
Joined: Monday 28 September 2015 15:13
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Dashticz - General Discussions

Postby HansieNL » Friday 19 May 2017 13:32

Spoiler: show
robgeerts wrote:Should work since beta last night....

Code: Select all

blocks ['274_1']['title'] = 'mijntitel';

Didn't work in first place but forget to split the block.
I had to add the blocks blocks ['274_1'] = {} and blocks ['274_2'] = {} first :)
Domoticz on Raspberry Pi 2, Homey, Hue lights, Toon thermostat, Logitech Harmony Hub, Fibaro Wall Plug, Fibaro Push Buttons, LightWaveRF Mood Controller, Venz M9 running LibreELEC, Synology NAS

User avatar
cyberclwn
Posts: 94
Joined: Thursday 20 August 2015 22:53
Target OS: Raspberry Pi
Domoticz version: beta
Location: The Netherlands
Contact:

Re: Dashticz - General Discussions

Postby cyberclwn » Friday 19 May 2017 23:43

cyberclwn wrote:Hey,

Thanks for the great work.
But there are somethings i don't know how to get working on dashticz:

1. I have a radiator-valve from Smartwares. it uses 2 devices. One is day/night (on/off) and one to use to set temperature/setpoint with. But if i add both to dashticz/CONFIG.js they both are shown as on/off devices. I can't find a way to show the 2nd device as a thermostat-option.
2. Can't get a google calendar displayed on my dahsticz, but i read you are working on changing a lot on that topic, so i wait for that. (there is a %-sign in my address, maybe that is messing things up tho)

There is a lot of posts to search thru, i apologize if i missed the solution somewhere.



So I guess there is no solution for the smartwares ?
Since i see other people's questions being answered and mine not.
3xPi 2B (Domoticz "live", Domoticz "sandbox", PhotoFrame)
RFXCom433(E), KaKu, Oregon Scientific, Keyes 2-relay, Logitech Media Server, MiLight, Smartwares heating controller(2x), IR Send/Receive, Keyes PIR, XH-M131 DuskSensor, DHT22/11

User avatar
HansieNL
Posts: 298
Joined: Monday 28 September 2015 15:13
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Dashticz - General Discussions

Postby HansieNL » Saturday 20 May 2017 0:35

cyberclwn wrote:
Spoiler: show
cyberclwn wrote:Hey,

Thanks for the great work.
But there are somethings i don't know how to get working on dashticz:

1. I have a radiator-valve from Smartwares. it uses 2 devices. One is day/night (on/off) and one to use to set temperature/setpoint with. But if i add both to dashticz/CONFIG.js they both are shown as on/off devices. I can't find a way to show the 2nd device as a thermostat-option.
2. Can't get a google calendar displayed on my dahsticz, but i read you are working on changing a lot on that topic, so i wait for that. (there is a %-sign in my address, maybe that is messing things up tho)

There is a lot of posts to search thru, i apologize if i missed the solution somewhere.



So I guess there is no solution for the smartwares ?
Since i see other people's questions being answered and mine not.

Hello cyberclwn,
Not sure, but maybe Rob missed your question. I suggest you post the smartwares part from your json output http://<domoticz-ip:<port>/json.htm?type=devices as code block in this forum with your question.
Domoticz on Raspberry Pi 2, Homey, Hue lights, Toon thermostat, Logitech Harmony Hub, Fibaro Wall Plug, Fibaro Push Buttons, LightWaveRF Mood Controller, Venz M9 running LibreELEC, Synology NAS


Return to “Dashticz”

Who is online

Users browsing this forum: No registered users and 2 guests