Ginlong, Omnik Solar, Solarman and Trannergy Inverters

Python and python framework
User avatar
Derik
Posts: 2099
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:

Re: Ginlong, Omnik Solar, Solarman and Trannergy Inverters

Post by Derik » Saturday 17 March 2018 13:02

Dear Alla..
Did run this script for a few years...
I need to do a clean install.
And now i cannot get the script to work..
When i read the topic i need a specail version of python..:

Code: Select all

odroid@odroid:~$  sudo apt-get install idle-python3.4
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 idle-python3.4 : Depends: python3.4 but it is not going to be installed
                  Depends: python3.4-tk
E: Unable to correct problems, you have held broken packages.
Only i still get an error..
hope some will help me

Thanks
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups

RichardBokker
Posts: 47
Joined: Thursday 09 April 2015 20:57
Target OS: Raspberry Pi
Domoticz version: 3.9317
Location: Netherlands
Contact:

Re: Ginlong, Omnik Solar, Solarman and Trannergy Inverters

Post by RichardBokker » Wednesday 25 April 2018 12:20

Still working like a charm! thnx.

anyone idea how fast i can run crontab to read out Ginlong? Because 5 minutes interval is to slow, thinking about 10 seconds or so.. :D
Don't know if ginlong will run at that frequency..?

TimZon
Posts: 2
Joined: Saturday 30 June 2018 12:14
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Ginlong, Omnik Solar, Solarman and Trannergy Inverters

Post by TimZon » Saturday 30 June 2018 14:09

Where do i have to start?

Installed Domoticz on raspberry.

Version 4.97 and python is 3.5.3

First make the virtual device and what sensor type do i need to choose?

And which version of the scripts can i use?

Thanks for helping Tim

User avatar
sincze
Posts: 927
Joined: Monday 02 June 2014 22:46
Target OS: Raspberry Pi
Domoticz version: 3.8875
Location: Netherlands
Contact:

Re: Ginlong, Omnik Solar, Solarman and Trannergy Inverters

Post by sincze » Sunday 01 July 2018 11:44

TimZon wrote:
Saturday 30 June 2018 14:09
Where do i have to start?

Installed Domoticz on raspberry.

Version 4.97 and python is 3.5.3

First make the virtual device and what sensor type do i need to choose?

And which version of the scripts can i use?

Thanks for helping Tim
Using the wiki would be a nice start to get some ideas on how to create the virtual sensors.
https://www.domoticz.com/wiki/Omnik_Solar_Inverter
The rest comes down to writing down the idx values and using the script in cron.
Version of script depends on the inverter type you have. Probably the last script in the forum is usually the best one. I always start reading at the end and move my wake back to front of the thread.
Using Pass2php since 2016-12
LAN: RFLink, P1-Port, OTGW, MySensors
USB: RFXCom, ZWave
WIFI: Mi-light Wifi-Bridge, Sonoff, ESP8266, Xiaomi Gateway
Solar: Omnik Inverter, PVOutput
Video: Kodi clients with Harmony HUB
Sensors: You name it I probably got 1.

TimZon
Posts: 2
Joined: Saturday 30 June 2018 12:14
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Ginlong, Omnik Solar, Solarman and Trannergy Inverters

Post by TimZon » Monday 02 July 2018 12:53

sincze wrote:
Sunday 01 July 2018 11:44
TimZon wrote:
Saturday 30 June 2018 14:09
Where do i have to start?

Installed Domoticz on raspberry.

Version 4.97 and python is 3.5.3

First make the virtual device and what sensor type do i need to choose?

And which version of the scripts can i use?

Thanks for helping Tim
Using the wiki would be a nice start to get some ideas on how to create the virtual sensors.
https://www.domoticz.com/wiki/Omnik_Solar_Inverter
The rest comes down to writing down the idx values and using the script in cron.
Version of script depends on the inverter type you have. Probably the last script in the forum is usually the best one. I always start reading at the end and move my wake back to front of the thread.
Thanks a lot!

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests