Create blocky with selector switch

Post Reply
User avatar
gielie
Posts: 225
Joined: Tuesday 12 January 2016 12:40
Target OS: Raspberry Pi
Domoticz version: latest β
Location: The Netherlands (Alkmaar)
Contact:

Create blocky with selector switch

Post by gielie » Tuesday 14 November 2017 16:12

I want to create a rule with a selector switch. The switch has 3 positions.
I want the switch to go from position 3 (30%) to position 2 (20%), 30 minutes after the switch has been put on position 3.
So what i did
if switch = (level) 30%
set switch = (level) 20% after x seconds

this doesnt work, does anybody know how i should do this?
- Vision ZU1401 USB Stick
- Aeotec MultiSensor 6
- FIBARO FGS222
- FIBARO FGWPE Wall Plug
- Everspring AN157
- Neo CoolCam Power plug
- Neo CoolCam PIR Sensor
- Popp Smoke Detector
- Toon
- Kodi Media Server

Milan1989
Posts: 6
Joined: Tuesday 24 October 2017 11:49
Target OS: -
Domoticz version:
Contact:

Re: Create blocky with selector switch

Post by Milan1989 » Sunday 14 January 2018 0:38

gielie wrote:I want to create a rule with a selector switch. The switch has 3 positions.
I want the switch to go from position 3 (30%) to position 2 (20%), 30 minutes after the switch has been put on position 3.
So what i did
if switch = (level) 30%
set switch = (level) 20% after x seconds

this doesnt work, does anybody know how i should do this?
Hi
I have the same problem.

Tapatalkkal küldve az én SM-G935F eszközömről


Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest