Doorbell blocky

Post Reply
gwabber
Posts: 7
Joined: Saturday 02 September 2017 14:32
Target OS: Windows
Domoticz version: 3.8153
Location: Netherlands
Contact:

Doorbell blocky

Post by gwabber » Thursday 21 September 2017 16:46

Hi Everyone,

i'm trying to create a blocky that turns on a relay when the doorbell is pressed. This purpose is that it only happens when it is between 07.00 and 17.00 hour. Then the relay should turn of after then minutes.

The doorbell has status 'on' in Domoticz and I created the following Blocky, but it doesnt work as it should. What am I doing wrong?

Thanks in advance!
blocky kopie.jpg
blocky kopie.jpg (27.29 KiB) Viewed 252 times

cobra045
Posts: 29
Joined: Friday 12 February 2016 21:58
Target OS: Raspberry Pi
Domoticz version: 3.4834
Contact:

Re: Doorbell blocky

Post by cobra045 » Thursday 21 September 2017 20:55

Hi gwabber,

You are using the wrong time option
Do not use the time option (00:00) but the logic option (0)

Cobra045

gwabber
Posts: 7
Joined: Saturday 02 September 2017 14:32
Target OS: Windows
Domoticz version: 3.8153
Location: Netherlands
Contact:

Re: Doorbell blocky

Post by gwabber » Thursday 21 September 2017 22:18

Thanks for your reply! I'm going to ty that.

I also think there is something wrong with the first part. When the doorbell is pressed the log doesnt show that the blocky is activated.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest