Kerui D026

Others (MiLight, Hue, Toon etc...)
User avatar
EdddieN
Posts: 263
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Scotland
Contact:

Re: Kerui D026

Post by EdddieN » Wednesday 28 June 2017 22:27

Hi,

I'm testing this one too, I have it recognised with RFXcom as Lighting4 sensor. However Domoticz shows them always as ON, but I can see on the logs that both, open and closed are received as:

Code: Select all

(RFX433) Lighting 4 (Unknown)
I have RFXtrx433E version with fw Type2/1017

Are you able to get it working as open closed?
11101101

denman091
Posts: 13
Joined: Monday 31 July 2017 15:22
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Pijnacker
Contact:

Re: Kerui D026

Post by denman091 » Friday 11 August 2017 10:20

Hi Guys,

I'm a new domoticz user. I have a RFXCom433e with Ext2/1020 firmware.
I want a door sensor witch i can add as a single security device. Open and Closed. I read that de Kerui D026 is supported in version 1012 by rfxcom but witch one i should by?
https://www.aliexpress.com/item/433MHz- ... 40451.html?
Or:
https://www.aliexpress.com/item/D026-Wi ... 30002.html?

Or are these 2 identical?

iLLiac4
Posts: 19
Joined: Thursday 31 August 2017 8:13
Target OS: -
Domoticz version:
Contact:

Re: Kerui D026

Post by iLLiac4 » Thursday 31 August 2017 8:18

I was testing D026 sensor with RFXTfx433E (1020) and if i enable only lightning4 protocol it receives open, close and temper signal but no battery status.
If i enable also x10 and lightning 4 protocol all three (open, close, temper) are sended as one signal, which is kind of not usefull.

Code: Select all

31. 08. 2017 08:16:34
Packettype    = Security1
subtype       = X10 security
Sequence nbr  = 1
id1-3         = 110D00 decimal:1117440
status        = Alarm + Tamper
battery level = OK
Signal level  = 8  -56dBm
Is this a normal behaviour?

b_weijenberg
Posts: 668
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Kerui D026

Post by b_weijenberg » Thursday 31 August 2017 8:23

Is the tamper switch closed?
What is received with X10 disabled?
RFXtrx433, RFXtrx433E

iLLiac4
Posts: 19
Joined: Thursday 31 August 2017 8:13
Target OS: -
Domoticz version:
Contact:

Re: Kerui D026

Post by iLLiac4 » Thursday 31 August 2017 9:01

Hmm. Is seems that it is domotics bug. As it lists as only one status. Will investigate further.
Status in rfx is:
------------------------------------------------
31. 08. 2017 09:00:57
------------------------------------------------
31. 08. 2017 09:00:58
Packettype = Security1
subtype = X10 security
Sequence nbr = 0
id1-3 = 110D00 decimal:1117440
status = Normal
battery level = OK
Signal level = 8 -56dBm
------------------------------------------------
31. 08. 2017 09:01:01
------------------------------------------------
31. 08. 2017 09:01:01
Packettype = Security1
subtype = X10 security
Sequence nbr = 1
id1-3 = 110D00 decimal:1117440
status = Alarm
battery level = OK
Signal level = 8 -56dBm
------------------------------------------------
31. 08. 2017 09:01:03
------------------------------------------------
31. 08. 2017 09:01:03
Packettype = Security1
subtype = X10 security
Sequence nbr = 2
id1-3 = 110D00 decimal:1117440
status = Alarm + Tamper
battery level = OK
Signal level = 8 -56dBm

Shyam
Posts: 117
Joined: Sunday 11 May 2014 22:11
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Kerui D026

Post by Shyam » Tuesday 22 May 2018 9:32

I've just got one of these. After playing around and updating my RFXtrx433 firmware, I'm able to add 3 new Lighting4 devices (open, closed and tamper). How can I get the battery status? I read on here that if I enable X10, I should see just a security sensor, but I'm not....
Raspberry Pi B+
Rfxcomm rfxtrx433
LigthwaveRF
Byron Door Bell
Accenta Gen4 Security System Integration
HomeEasy PIR
Nest Thermostat
Geofencing
Pushover
Blog: http://www.shyambhundia.com

b_weijenberg
Posts: 668
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Kerui D026

Post by b_weijenberg » Tuesday 22 May 2018 11:38

Kerui D026 sensors reported as X10 security sensors is supported by the RFXtrx433E using Ext2 firmware.
See also chapter 2.2.2. in the RFXtrx User Guide.
RFXtrx433, RFXtrx433E

Shyam
Posts: 117
Joined: Sunday 11 May 2014 22:11
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Kerui D026

Post by Shyam » Tuesday 22 May 2018 12:08

b_weijenberg wrote:
Tuesday 22 May 2018 11:38
Kerui D026 sensors reported as X10 security sensors is supported by the RFXtrx433E using Ext2 firmware.
See also chapter 2.2.2. in the RFXtrx User Guide.
Right that make sense! Cheers
Raspberry Pi B+
Rfxcomm rfxtrx433
LigthwaveRF
Byron Door Bell
Accenta Gen4 Security System Integration
HomeEasy PIR
Nest Thermostat
Geofencing
Pushover
Blog: http://www.shyambhundia.com

Post Reply

Who is online

Users browsing this forum: GraveDigger and 2 guests