No log espeasy humidity

Everything about esp8266 and more.
Post Reply
mischa
Posts: 106
Joined: Tuesday 07 April 2015 20:32
Target OS: Raspberry Pi
Domoticz version: 3.8872
Location: Heerhugowaard, The Netherlands
Contact:

No log espeasy humidity

Post by mischa » Saturday 23 December 2017 0:28

I have a wemos D1 mini with the EspEasy the v2.0.0-dev11 firmware.
Reading the temperature and humidity with a DHT-22 and created custom rules for updating seperate virtual temp and humidity sensor.

both sensors give the correct values in domoticz , but when I want to see the log for the humidity it is showing the temp graph.
Is it just not showing the correct graph or is it not recording the log?

Is this a problem with the virtual Humidity sensor in Domoticz?

Here is the rule I use in the espeasy to send the humidity value to the Domoticz virtual humidity sensor:

Code: Select all

on Temp + Vocht#Humidity do
SendToHTTP 192.168.75.245,8084,/json.htm?type=command&param=udevice&idx=7&nvalue=[Temp + Vocht#Humidity]
endon
Pi 2 - Pi 1 - Razzbery 2.0 - Fibaro FGD-211 - Fibaro FGD-212 - Fibaro FGRGBWM-441 (RGBW Module) - Fibaro FGBS321 (Universal Switch) - FGWPF-102 - TBK Home TZ67-G - Synology DS1515+ - Esp Easy (with wemos D1 mini)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest