Espeasy with several sensors connected

Everything about esp8266 and more.
Post Reply
MsbS
Posts: 42
Joined: Friday 19 May 2017 14:00
Target OS: Raspberry Pi
Domoticz version:
Contact:

Espeasy with several sensors connected

Post by MsbS » Saturday 26 August 2017 12:06

I am planning to upgrade my Domoticz setup with some sensors based on EspEasy (D1 mini and BME280 are en route already). But I just started wondering: will I be able to connect a few different sensors to one EspEasy? Like - build a T+H+B and dust PM2.5 for the bedroom, using 1 D1 uC with BME280 and GP2Y10 connected to pins? I understand the pin count is limited, but I am more concerned if it will send different values to Domoticz correctly (T+H+B and Pm2.5).

Noob question, the answer is probably obvious, but not easy to Google for it.

User avatar
jvdz
Posts: 1396
Joined: Tuesday 30 December 2014 20:25
Target OS: Raspberry Pi
Domoticz version: Stable
Location: Westland/Netherlands
Contact:

Re: Espeasy with several sensors connected

Post by jvdz » Saturday 26 August 2017 17:44

I currently have a Wemos with ESPEASY running that has these connected and communicating to Domoticz:
- MH-Z19b CO2 sensor
- DHT22 Sensor for Temp&Humidity
- BMP180 sensor for Temp&Presure
- 2 x BH1750 sensors for Lux reading.

All working nicely on one Wemos. :-)

Jos

MsbS
Posts: 42
Joined: Friday 19 May 2017 14:00
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Espeasy with several sensors connected

Post by MsbS » Saturday 26 August 2017 23:14

jvdz wrote:I currently have a Wemos with ESPEASY running that has these connected and communicating to Domoticz:
- MH-Z19b CO2 sensor
- DHT22 Sensor for Temp&Humidity
- BMP180 sensor for Temp&Presure
- 2 x BH1750 sensors for Lux reading.

All working nicely on one Wemos. :-)

Jos
Cool, thanks. T+H+B, PM2.5, CO2, maybe some gas sensors. My bedroom will soon be smarter than me!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest