Milight gateway running on ESP8266

Everything about esp8266 and more.
Post Reply
User avatar
Mooseknuckle
Posts: 68
Joined: Sunday 08 March 2015 10:24
Target OS: Raspberry Pi
Domoticz version:
Contact:

Milight gateway running on ESP8266

Post by Mooseknuckle » Tuesday 18 July 2017 19:51

Hi guys,

In search for a good solution for my Milights I found this neat project:
https://github.com/sidoh/esp8266_milight_hub
Just installed it because I had the parts lying around and it works like a charm. You can make a lot of virtual gateways and add them all to Domoticz so no more 4 zone limit. You even can spoof a gateway if you already have one. By far the cheapest solution with lots of possibilities:
- no zone limit
- rest api
- MQTT integration
- UDP gateway

Image
Greetings,
RPI 3, Philips Hue,Toon Thermostat, Harmony Smart Control, Yeelights
Mysensors wifi gateway + sensors, RFXtrx433E, Kaku stuff, Xiaomi gateway + sensors
Domoticz controlled DIY ambilight, Selectplus chime, Mi-light led controller

User avatar
sincze
Posts: 960
Joined: Monday 02 June 2014 22:46
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Netherlands
Contact:

Re: Milight gateway running on ESP8266

Post by sincze » Wednesday 19 July 2017 20:39

Nice, find :D
I've these parts somewhere as well, let me give it a try :lol:
Using Pass2php since 2016-12
LAN: RFLink, P1-Port, OTGW, MySensors
USB: RFXCom, ZWave
WIFI: Mi-light Wifi-Bridge, Sonoff, ESP8266, Xiaomi Gateway
Solar: Omnik Inverter, PVOutput
Video: Kodi clients with Harmony HUB
Sensors: You name it I probably got 1.

User avatar
ledfreak3d
Posts: 79
Joined: Sunday 01 November 2015 16:30
Target OS: Linux
Domoticz version: 3.8025
Location: Hoorn
Contact:

Re: Milight gateway running on ESP8266

Post by ledfreak3d » Sunday 17 September 2017 10:23

found this one some time ago also have it running for a couple of months now works beter then the original milight gw
Unleashe the magic smoke ;)

JoshDinsdale
Posts: 17
Joined: Monday 24 February 2014 15:31
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Milight gateway running on ESP8266

Post by JoshDinsdale » Wednesday 11 October 2017 18:18

Anyone had any luck using CCT bulbs with this? I can pair them to the ESP and control them via its web interface, but domotics doesnt seem to be sending the right commands. I've tried using all of the different bulb variants and changing the controller version between 5 and 6 but nothing works.

hayman
Posts: 56
Joined: Tuesday 15 March 2016 19:08
Target OS: NAS (Synology & others)
Domoticz version: 3.8153
Location: Nerthland
Contact:

Re: Milight gateway running on ESP8266

Post by hayman » Monday 06 August 2018 21:14

JoshDinsdale wrote:
Wednesday 11 October 2017 18:18
Anyone had any luck using CCT bulbs with this? I can pair them to the ESP and control them via its web interface, but domotics doesnt seem to be sending the right commands. I've tried using all of the different bulb variants and changing the controller version between 5 and 6 but nothing works.
Same as above any help please

hayman
Posts: 56
Joined: Tuesday 15 March 2016 19:08
Target OS: NAS (Synology & others)
Domoticz version: 3.8153
Location: Nerthland
Contact:

Re: Milight gateway running on ESP8266

Post by hayman » Saturday 11 August 2018 19:14

sincze wrote:
Wednesday 19 July 2017 20:39
Nice, find :D
I've these parts somewhere as well, let me give it a try :lol:
thanks know i get it link to Domoticz

User avatar
sincze
Posts: 960
Joined: Monday 02 June 2014 22:46
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Netherlands
Contact:

Re: Milight gateway running on ESP8266

Post by sincze » Saturday 11 August 2018 19:25

Excellent, well done!
This forum is all about sharing knowledge. :D
Using Pass2php since 2016-12
LAN: RFLink, P1-Port, OTGW, MySensors
USB: RFXCom, ZWave
WIFI: Mi-light Wifi-Bridge, Sonoff, ESP8266, Xiaomi Gateway
Solar: Omnik Inverter, PVOutput
Video: Kodi clients with Harmony HUB
Sensors: You name it I probably got 1.

poudenes
Posts: 546
Joined: Wednesday 08 March 2017 10:42
Target OS: Linux
Domoticz version: 3.8993
Location: Amsterdam
Contact:

Re: Milight gateway running on ESP8266

Post by poudenes » Tuesday 14 August 2018 13:10

I can sniffer my bulbs and can add them. But When i want try to pair the bulb nothing happen. No flashing of bulb.
And how can i add unlimited zones. I see 4 groups and a "all" ?
RPi3 with OSMC - RPi3 with Domoticz - Dashticz - MiLight - Nanolead Aurora - KaKu - Logitech Hamony - Nest - RFLink

User avatar
thecosmicgate
Posts: 258
Joined: Monday 06 April 2015 14:37
Target OS: Linux
Domoticz version: newest
Location: The Netherlands / Hoeven
Contact:

Re: Milight gateway running on ESP8266

Post by thecosmicgate » Saturday 15 September 2018 16:07

Someone get this working with a FUT 18 milight bulb ?

Sent from my ONEPLUS A6003 using Tapatalk

It's nice to be important, but it's more important to be nice
Scooter ;)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest