ESP8266 Air quality sensor

Everything about esp8266 and more.
Mads
Posts: 31
Joined: Thursday 18 January 2018 21:57
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: ESP8266 Air quality sensor

Post by Mads » Saturday 20 January 2018 21:29

Mads wrote:
jvdz wrote:Great, so that means it works. Now only add the Rule back and leave the Device tickbox unchecked.
This should trigger the update to domoticz each time the MHZ19 is updated on ESPEasy.

Jos
Can i setup to update om every minutter?

Sendt fra min ONEPLUS A3003 med Tapatalk
Nothing has changed the last 10 min. Image

Sendt fra min ONEPLUS A3003 med Tapatalk


Mads
Posts: 31
Joined: Thursday 18 January 2018 21:57
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: ESP8266 Air quality sensor

Post by Mads » Saturday 20 January 2018 21:34

Mads wrote:
Mads wrote:
jvdz wrote:Great, so that means it works. Now only add the Rule back and leave the Device tickbox unchecked.
This should trigger the update to domoticz each time the MHZ19 is updated on ESPEasy.

Jos
Can i setup to update om every minutter?

Sendt fra min ONEPLUS A3003 med Tapatalk
Nothing has changed the last 10 min. Image

Sendt fra min ONEPLUS A3003 med Tapatalk
**problem Solved***

Was the wrong idx in the rules ImageImage

I own you a beer.

Sendt fra min ONEPLUS A3003 med Tapatalk


User avatar
jvdz
Posts: 1343
Joined: Tuesday 30 December 2014 20:25
Target OS: Raspberry Pi
Domoticz version: Stable
Location: Westland/Netherlands
Contact:

Re: ESP8266 Air quality sensor

Post by jvdz » Saturday 20 January 2018 21:36

Mads wrote:
Saturday 20 January 2018 21:34
**problem Solved***
Great !!
Mads wrote:
Saturday 20 January 2018 21:34
I own you a beer.
Sounds good... just leave me a place to stop by ;)

Enjoy... Jos

Mads
Posts: 31
Joined: Thursday 18 January 2018 21:57
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: ESP8266 Air quality sensor

Post by Mads » Saturday 20 January 2018 21:46

jvdz wrote:
Mads wrote:
Saturday 20 January 2018 21:34
**problem Solved***
Great !!
Mads wrote:
Saturday 20 January 2018 21:34
I own you a beer.
Sounds good... just leave me a place to stop by ;)

Enjoy... Jos
If your way crossed Denmark, then give me a headsup :)

Is IT only the mh-z19 where this problem is. With the box should be uncheck (send to controller)

Sendt fra min ONEPLUS A3003 med Tapatalk


User avatar
jvdz
Posts: 1343
Joined: Tuesday 30 December 2014 20:25
Target OS: Raspberry Pi
Domoticz version: Stable
Location: Westland/Netherlands
Contact:

Re: ESP8266 Air quality sensor

Post by jvdz » Saturday 20 January 2018 23:27

I do not know all devices supported by Espeasy, but yes, the code for the mhz19 is wrong. That is why I have my own version on github which actually does work now using the build in update mechanism.

Jos

nixalsschrott
Posts: 39
Joined: Tuesday 11 July 2017 10:26
Target OS: NAS (Synology & others)
Domoticz version: beta
Location: Germany
Contact:

Re: ESP8266 Air quality sensor

Post by nixalsschrott » Friday 26 January 2018 8:55

Dear friends,

by the way, is there any chance to also get the forecast for the baro values, e.g. cloudy, sunny, rain, dry, etc.? Actually on the switch no value or not available is shown?

Kind regards
Matty
Domoticz Beta v3.9317 for DSM 6.1 | Aeon Labs Z-Wave USB Stick | Cyrus SmartHome 4-in-1 Multisensor | Qubino ZMNHCD1 - Roller Shutter | NEO COOLCAM NAS-WR01ZE Power Plug | WEMOS D1 MINI (ESP8266) Sensors CO2/TEMP/BARO | Denon AVR

User avatar
jvdz
Posts: 1343
Joined: Tuesday 30 December 2014 20:25
Target OS: Raspberry Pi
Domoticz version: Stable
Location: Westland/Netherlands
Contact:

Re: ESP8266 Air quality sensor

Post by jvdz » Friday 26 January 2018 9:21

With an airquality sensor?
Nah .... Not going to work :roll:

Jos

In other words... Your question is totally unrelated to this thread.

nixalsschrott
Posts: 39
Joined: Tuesday 11 July 2017 10:26
Target OS: NAS (Synology & others)
Domoticz version: beta
Location: Germany
Contact:

Re: ESP8266 Air quality sensor

Post by nixalsschrott » Friday 26 January 2018 17:51

Hi,

no I mean baro=baromether (BMP180) which is giving pressure values.

Kind regards
Domoticz Beta v3.9317 for DSM 6.1 | Aeon Labs Z-Wave USB Stick | Cyrus SmartHome 4-in-1 Multisensor | Qubino ZMNHCD1 - Roller Shutter | NEO COOLCAM NAS-WR01ZE Power Plug | WEMOS D1 MINI (ESP8266) Sensors CO2/TEMP/BARO | Denon AVR

User avatar
jvdz
Posts: 1343
Joined: Tuesday 30 December 2014 20:25
Target OS: Raspberry Pi
Domoticz version: Stable
Location: Westland/Netherlands
Contact:

Re: ESP8266 Air quality sensor

Post by jvdz » Friday 26 January 2018 17:58

I guess I did understand and have a bmp180 myself in use connected to the same wemos/Espeasy setup and together with a dht22 for temp/hum.
My point was that this thread is specifically about the setup for airquality. ;)

Jos

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest