Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Information about specific Z-Wave devices
Post Reply
berkens
Posts: 40
Joined: Tuesday 06 October 2015 13:03
Target OS: NAS (Synology & others)
Domoticz version: 3.8891
Location: Amsterdam
Contact:

Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by berkens » Sunday 14 January 2018 14:09

Supplier:
Eurotronic GmbH

Website:
https://www.eurotronic.org/produkte/spi ... -plus.html

Image

Function:
HVAC Thermostats

Z-Wave5:
Yes

EAN:
4260012711301

Features:
  • Easy control for water radiators from any Z-Wave Controller
    Fits most European water radiators (wide range of additional adaptors for different manufacturers available)
    FLiRS for quick response time (Frequently Listening Receiver Slave)
    LED Backlit LCD
    Metal nut for reliable connection to the radiator
    2 buttons for easy temperature regulation
    Battery level indicator
    Child Lock
    Over the Air update
    UK-Mode for upside down installation (LCD display upside-down)
    Open Window detection
    Automatic frost protection
Manual:
https://www.eurotronic.org/fileadmin/us ... iew_04.pdf

Datasheet (DE)
https://www.eurotronic.org/fileadmin/us ... 8_2017.pdf

Z-Wavealliance.org
https://products.z-wavealliance.org/products/2543

Product Features: View Features
Z-Wave Plus: Yes
Security S2 Classes: S2 Unauthenticated
Manufacturer Provided Product Manual: Download
Association Capabilities: View Associations
Configuration Capabilities: View Configuration Parameters
Z-Wave hardware platform: ZM5202
Z-Wave version: 6.71.01
Z-Wave library type: Enhanced 232 Slave
Z-Wave Device Type: Thermostat - HVAC
Z-Wave Role Type: Listening Sleeping Slave
Product Type ID: 0x0003
Product ID: 0x0001
Network Management Instructions: View Network Management Info

Command Classes: View Command Classes
Associated Categories: HVAC Thermostats
This Brand: See other products of this brand
Download Product Data in XML Format: Download

Nodes:
Nodes.png
Eurotronic Spirit Nodes
Nodes.png (25.24 KiB) Viewed 2641 times
Configuration:
Configuration.png
Eurotronic Spirit Configuration
Configuration.png (28.83 KiB) Viewed 2641 times
Product data XML
ZC10-17095777.XML
Eurotronic Product Data
(18.67 KiB) Downloaded 165 times
openzwave_manufacturer_specific.xml (manufacturer_specific.xml)

Code: Select all

<Manufacturer id="0148" name="EUROtronic">
                <Product type="0003" id="0001" name="EUR_SPIRIT Thermostat" config="eurotronic/eur_spirit.xml"/>
        </Manufacturer>
openzwave_deviceconfig.xml (eur_spirit.xml)

Code: Select all

<Product sourceFile="eurotronic/eur_spirit.xml">
        <!-- BASIC -->
        <CommandClass id="32" >
                <Value type="list" genre="user"  instance="1" index="0" label="BasicFunction" min="0" max="254" value="0" size="1">
                        <Item label="Off" value="15" />
                        <Item label="Heat" value="254" />
                        <Item label="Heat Econ" value="0" />
                        <Item label="Full Power" value="240" />
                </Value>
        </CommandClass>
        <!-- THERMOSTAT_MODE -->
        <CommandClass id="64" >
                <Value type="byte" genre="config" index="1" label="Mode" units="" min="0" max="15" value="0">
                <Help> 0=Off, 1=Heat, 11=Eco, 15=FullPower </Help>
                </Value>
        </CommandClass>
        <!-- THERMOSTAT_SETPOINT -->
        <CommandClass id="67">
                <Value type="decimal" genre="config" index="1" label="ComfortSetpoint" units="C" value="23"/>
                <Value type="decimal" genre="config" index="11" label="EnergySavingSetpoint" units="C" value="18"/>
        </CommandClass>
        <!-- Configuration Parameter -->
        <CommandClass id="112">
                <Value type="byte" genre="config" index="1" label="LCDInvert" units="" value="0"/>
                <Value type="byte" genre="config" index="2" label="LCDTimeout" units="" value="0"/>
                <Value type="byte" genre="config" index="3" label="Backlight" units="" value="1"/>
                <Value type="byte" genre="config" index="4" label="BatteryReport" units="" value="1"/>
                <Value type="byte" genre="config" index="5" label="MeasuredTempReport" units="" value="5"/>
                <Value type="byte" genre="config" index="6" label="ValveopenReport" units="" value="0"/>
                <Value type="byte" genre="config" index="7" label="WindowOpenDetect" units="" value="2"/>
                <Value type="byte" genre="config" index="8" label="TempOffset" units="" value="0"/>
        </CommandClass>

</Product>

To be continued...
Last edited by berkens on Tuesday 16 January 2018 19:43, edited 3 times in total.
Windows 10 laptop, Synology DS214 + DSM6.1, Zwave.me USB, Neo CoolCam powerplugs & dual wall switches, Heiman gasdetector, Eurotronic Spirit heatvalve, Samsung SmartThings hub v2 UK

berkens
Posts: 40
Joined: Tuesday 06 October 2015 13:03
Target OS: NAS (Synology & others)
Domoticz version: 3.8891
Location: Amsterdam
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by berkens » Sunday 14 January 2018 15:39

The settings in Domoticz needs more fine tuning.

The HVAC/Thermostat is seen as a light/switch, switch, dimmer.
Valve-position.png
Eurotronic Spirit valve position
Valve-position.png (8.85 KiB) Viewed 2638 times
Valve-position2.png
Eurotronic Spirit valve position 86%
Valve-position2.png (9.22 KiB) Viewed 2626 times
I already changed the pictogram, it was shown as a bulb.

The are blinds, dimmer, doorbell, doorlock, doorswitch, sirene, nothing about heating that fits the need.
Switchtype.png
Different switch types
Switchtype.png (61.26 KiB) Viewed 2626 times
Windows 10 laptop, Synology DS214 + DSM6.1, Zwave.me USB, Neo CoolCam powerplugs & dual wall switches, Heiman gasdetector, Eurotronic Spirit heatvalve, Samsung SmartThings hub v2 UK

berkens
Posts: 40
Joined: Tuesday 06 October 2015 13:03
Target OS: NAS (Synology & others)
Domoticz version: 3.8891
Location: Amsterdam
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by berkens » Friday 19 January 2018 22:34

The display in "up-side-down" mode.

For locations where the valve is mounted in other position.

In this picture the temperature = 22.0 oC.

Compare it to the the picture in the first msg
eurotronic-upsidedown.jpg
Eurotronic Spirit display upside-down
eurotronic-upsidedown.jpg (2.1 KiB) Viewed 2581 times
Windows 10 laptop, Synology DS214 + DSM6.1, Zwave.me USB, Neo CoolCam powerplugs & dual wall switches, Heiman gasdetector, Eurotronic Spirit heatvalve, Samsung SmartThings hub v2 UK

ropske
Posts: 313
Joined: Tuesday 12 August 2014 5:37
Target OS: Raspberry Pi
Domoticz version: V3_8394
Location: Rumbeke,Belgium
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by ropske » Wednesday 21 February 2018 21:17

Hi, first of all, thanks mate.

Do we need to copy/install this ZC10-17095777.XML somewhere?

Can you give us an overview of the devices you get in domoticz for 1 valve?
I got 11 devices but i don't know what they all mean/can do

And i think many other here also, thank you!

Wolfgang
Posts: 7
Joined: Saturday 28 October 2017 21:37
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by Wolfgang » Friday 23 February 2018 19:59

Thank you for the XML File ,

but there is a problem with the temperature offset setting. If you set the offset to a value below 0 the value is not set.
I bought the valve to use it as an alternative to the danfoss lc-13 , because of the missing offset setting.
If you have a radiator built in a wooden cabinet you get wrong temperature values from the controller because of the hot spot near the sensor.
So the offset value is pretty important to me.

Addtional there is no possibility to set the target temp as a device like the lc-13 , is this a xml setting ?

Wolfgang
Posts: 7
Joined: Saturday 28 October 2017 21:37
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by Wolfgang » Saturday 24 February 2018 18:35

... found a solution ...

setting the value to 215 ( 255 - 40 = -4.0 degrees Offset ) is corresponding to the negative offset

berkens
Posts: 40
Joined: Tuesday 06 October 2015 13:03
Target OS: NAS (Synology & others)
Domoticz version: 3.8891
Location: Amsterdam
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by berkens » Sunday 04 March 2018 19:31

ropske wrote:
Wednesday 21 February 2018 21:17
Hi, first of all, thanks mate.

Do we need to copy/install this ZC10-17095777.XML somewhere?

Can you give us an overview of the devices you get in domoticz for 1 valve?
I got 11 devices but i don't know what they all mean/can do
The file ZC10,,,, is a product data file, explaining several specs of the controller.
You can you the information as a guideline to make the eur_spirit.xml, but I haven't used it in Domoticz.

I don't control the thermostat at this moment.

Can't help you with all the options.
.
Attachments
Therm-devices.PNG
Eurotronic Spirit devices
Therm-devices.PNG (48.63 KiB) Viewed 1870 times
thermostaatkraan.PNG
Devices overview Eurotronic Spirit
thermostaatkraan.PNG (36.64 KiB) Viewed 1878 times
Windows 10 laptop, Synology DS214 + DSM6.1, Zwave.me USB, Neo CoolCam powerplugs & dual wall switches, Heiman gasdetector, Eurotronic Spirit heatvalve, Samsung SmartThings hub v2 UK

Madgeni
Posts: 1273
Joined: Friday 25 March 2016 18:43
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by Madgeni » Wednesday 07 March 2018 19:22

Hi -
Am i missing something - which of the 11 switches allows me to set the temp setpoint?

Thanks for the help!
Native Alexa skill and Google app - register at https://www.controlicz.com

jeecee
Posts: 3
Joined: Tuesday 27 February 2018 14:46
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by jeecee » Wednesday 07 March 2018 20:24

How much sound does this device make, compared to the LC13 (which are basically mute)?


Sent from my iPhone using Tapatalk

berkens
Posts: 40
Joined: Tuesday 06 October 2015 13:03
Target OS: NAS (Synology & others)
Domoticz version: 3.8891
Location: Amsterdam
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by berkens » Saturday 10 March 2018 20:09

Madgeni wrote:
Wednesday 07 March 2018 19:22
Am i missing something - which of the 11 switches allows me to set the temp setpoint?
The Dry Air Temp is de heating setpoint.
Windows 10 laptop, Synology DS214 + DSM6.1, Zwave.me USB, Neo CoolCam powerplugs & dual wall switches, Heiman gasdetector, Eurotronic Spirit heatvalve, Samsung SmartThings hub v2 UK

berkens
Posts: 40
Joined: Tuesday 06 October 2015 13:03
Target OS: NAS (Synology & others)
Domoticz version: 3.8891
Location: Amsterdam
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by berkens » Saturday 10 March 2018 20:13

jeecee wrote:
Wednesday 07 March 2018 20:24
How much sound does this device make, compared to the LC13 (which are basically mute)?
I find it very soft / quiet / silent compared to the Honeywell Rondostat heatvalve I have at other places. I don't hear it at 50 cm distantie.
Windows 10 laptop, Synology DS214 + DSM6.1, Zwave.me USB, Neo CoolCam powerplugs & dual wall switches, Heiman gasdetector, Eurotronic Spirit heatvalve, Samsung SmartThings hub v2 UK

ropske
Posts: 313
Joined: Tuesday 12 August 2014 5:37
Target OS: Raspberry Pi
Domoticz version: V3_8394
Location: Rumbeke,Belgium
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by ropske » Saturday 10 March 2018 20:53

for me its indeed very soft, i don't hear it.
i have allready a couple in my house

Madgeni
Posts: 1273
Joined: Friday 25 March 2016 18:43
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by Madgeni » Saturday 10 March 2018 21:03

berkens wrote:
Saturday 10 March 2018 20:09
Madgeni wrote:
Wednesday 07 March 2018 19:22
Am i missing something - which of the 11 switches allows me to set the temp setpoint?
The Dry Air Temp is de heating setpoint.
Thanks berkens :)

Do you have any issue with Domoticz not detecting it? The node isn't showing as asleep - but unseen - If i reboot Domoticz, it reconnects once and updates the data.
Native Alexa skill and Google app - register at https://www.controlicz.com

berkens
Posts: 40
Joined: Tuesday 06 October 2015 13:03
Target OS: NAS (Synology & others)
Domoticz version: 3.8891
Location: Amsterdam
Contact:

Re: Z-Wave factfile Eurotronic Spirit Z-Wave+ radiator thermostat controller

Post by berkens » Sunday 18 March 2018 14:43

Madgeni wrote:
Saturday 10 March 2018 21:03
berkens wrote:
Saturday 10 March 2018 20:09
Madgeni wrote:
Wednesday 07 March 2018 19:22
Am i missing something - which of the 11 switches allows me to set the temp setpoint?
The Dry Air Temp is de heating setpoint.
Thanks berkens :)

Do you have any issue with Domoticz not detecting it? The node isn't showing as asleep - but unseen - If i reboot Domoticz, it reconnects once and updates the data.
I'm still a beginner. Installed my Zwave.me USB stick and Domoticz on my Synology NAS DS214... Placed under the roof of my 3 story house I have often dead node(s) in the network. Also the Eurotronic Spirit heatvalve in the kitchenette downstairs is sometimes a dead node.

Now I installed the NAS on the ground floor in a cabinet and I loose the node(s) upstairs. Keeps me busy with problem before I go any further with home automation.

As repeaters I use 2x Neocam powerplug and a Heiman gasdetector HS1CG-Z on 220v, on the different stocks, but still dead nodes.

In the settings of Domoticz in the Zwave.me controller is the option

""Enable Nightly Heal Network 04:00u"

Never seen that it repaired (Heal) the network, I have it enabled, but there is no result shown (time when finished or so). That is still a mistery for me.

Grtn Ben
Windows 10 laptop, Synology DS214 + DSM6.1, Zwave.me USB, Neo CoolCam powerplugs & dual wall switches, Heiman gasdetector, Eurotronic Spirit heatvalve, Samsung SmartThings hub v2 UK

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest