Z-Wave factfile and repair: Everspring AN145 AKA Eminent EM6555

Information about specific Z-Wave devices
Post Reply
User avatar
Domosapiens
Posts: 352
Joined: Wednesday 20 August 2014 12:08
Target OS: Windows
Domoticz version: V3.5981
Location: NL
Contact:

Z-Wave factfile and repair: Everspring AN145 AKA Eminent EM6555

Post by Domosapiens » Friday 30 December 2016 13:25

Supplier:
Everspring
Image

Website:
http://www.everspring.com/Products/Home ... AN145.aspx

Function:
E27 Screw-in On/Off Module and transceiver

Z-Wave+ AKA GEN5
No

Rebranding:
Eminent EM6555

Device Library from http://www.pepper1.net
http://www.pepper1.net/zwavedb/device/57

Manual
https://cdn.shopify.com/s/files/1/0218/ ... 2014405727

Domoticz experience
Hardware:
Bulky E27 plug module with local switch.

Remarks:
No polling needed. No security.

Configuration:
Reports itself as AN157 (is wrong, seems to be a FW error).
No configuration options

Devices
Only a switch

zwcfg_0xaaaaaaa.xml sample:
All type of useless AN157 stuff

Conclusion
Overpriced and bulky.
But if you can buy them for 12€ or so: take them apart and use the electronics for build-in purposes while improving your mesh-network.
Like shown here: https://www.domoticaforum.eu/viewtopic.php?f=50&t=10978

Repair
If the switch, when switched On, goes On/Off all the time, and the relay is clicking:
Replace the yellow capacitor, used in the 230V power circuit, it is outside it's tolerance.
F.i. from here:
https://nl.aliexpress.com/item/0-47uF-9 ... yId=141908
20161229_162212_small.jpg
20161229_162212_small.jpg (103.05 KiB) Viewed 339 times
.

Please report if you have this error too (to gather reliability info).
Thanks.
Win Vista&7; 1#Aeon Z-Stick S2; 1#Aeotec Z-Sick Gen5, 6#Fib.FGBS001; 24#DS18B20; 8#Everspr.AN158-2; 3#Philio PAN04; 1#Philio PAN06, 1#YouLess El; 1#Fib.FGWPE; 1#ZME_RC2; 2#FAK_ZWS230, 2#Quib.ZMNHCDx, 1#Quib.ZMNHDD1, 7#EM6555

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests