how to start scene with module Fibaro

Information about specific Z-Wave devices
Post Reply
TruusDom
Posts: 11
Joined: Wednesday 09 March 2016 21:46
Target OS: Raspberry Pi
Domoticz version: 3
Location: Oosterhout
Contact:

how to start scene with module Fibaro

Post by TruusDom » Saturday 14 May 2016 17:07

I read it is possible to start a scene with the fibaro FGS-212 by pressing the switch 3 times. Offcourse this will work with the Fibaro controller, but does this also works in Domoticz?

Why?
I have a staircase and each floor has a light. However the lightswitch on the first floor for the first floor is located far away from the stairs.
however the lightswitch for the second floor is located on the first floor next to the stairs. I guess the builder forgot to place a switch.
I want to use the lightswitch on the first floor to be use as the switch for the second floor as well as the first floor.
On the second floor by pushing the switch manaully and the first floor by using a scene when pressed two (or three) times.

Thanks in advance.
Nooby user with
RPI2B / Aeotec Z-Stick gen5 / Aeon Sirene gen5 / FGSD002/ Fibaro door-window sensor / Fibaro Universal Binary Sensor / Keypad MG36B / Vison ZS5101 /Aeotec recessed door and window sensor with zwave plus / Weather Underground

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest