Duco rf ventilation remote

433Mhz opensource Receiver & Transmitter.

Moderator: Stuntteam

Post Reply
User avatar
thecosmicgate
Posts: 249
Joined: Monday 06 April 2015 14:37
Target OS: Linux
Domoticz version: newest
Location: The Netherlands / Hoeven
Contact:

Duco rf ventilation remote

Post by thecosmicgate » Sunday 20 December 2015 21:00

Is there anybody who also uses this remote for the duco air ventilion and got this working with RFlink ?
The remote itself is an battery powered control unit with 4 different buttons: 1,2,3 and auto .
It's nice to be important, but it's more important to be nice
Scooter ;)

SweetPants
Posts: 2174
Joined: Friday 12 July 2013 21:24
Target OS: Linux
Domoticz version: V4.9895
Location: The Netherlands
Contact:

Re: Duco rf ventilation remote

Post by SweetPants » Sunday 20 December 2015 22:21

What are the specs of the remote in terms of frequency and protocol?
Does RFX-Manager see the remote?
Ubuntu 16.04.3 LTS, Intel NUC, MySensors 2.3.0-alpha, Pro Mini 3.3/8M RFM69(HW), ESP8266 (SDK2.2.0), Sonoff, RFLink, RFXcom, MQTT, NodeRed, Domoticz Beta (from source)

User avatar
Stuntteam
Posts: 435
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Duco rf ventilation remote

Post by Stuntteam » Monday 21 December 2015 1:19

Hi,

The Duco is, so far, not supported.
Use the RFLink Loader program and record the button signals with the debug mode.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

cos4x4
Posts: 3
Joined: Monday 01 February 2016 22:38
Target OS: Raspberry Pi
Domoticz version: 2.3530
Location: nieuwegein
Contact:

Re: Duco rf ventilation remote

Post by cos4x4 » Monday 08 February 2016 21:57

RF-apparatuur op 868 MHz see the manual http://www.duco.eu/Wes/CDN/1/Attachment ... 923179.pdf

User avatar
Stuntteam
Posts: 435
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Duco rf ventilation remote

Post by Stuntteam » Tuesday 09 February 2016 0:45

That does not change anything.. RFlink already has some 868 protocols and when you use it with the right RF modules will work fine on that frequency. Just like the fact that it works on 315 mhz and 915 mhz.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

User avatar
thecosmicgate
Posts: 249
Joined: Monday 06 April 2015 14:37
Target OS: Linux
Domoticz version: newest
Location: The Netherlands / Hoeven
Contact:

Re: Duco rf ventilation remote

Post by thecosmicgate » Tuesday 09 February 2016 23:07

Stuntteam : that would be nice ! Because we also we have this duco air system also
It's nice to be important, but it's more important to be nice
Scooter ;)

nosehook
Posts: 22
Joined: Thursday 31 March 2016 20:49
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Duco rf ventilation remote

Post by nosehook » Friday 01 April 2016 19:24

Is there an update on this?
I have Duco ventilationa and would very much like to implement it in my Domoticz setu.
Currently I run a Raspberry Pi with RFXcom 433E.
Can anyone tell me what hardware I'd need and how to implement it?

Dank,

Freek
B+ Domoticz | B+ OpenElec | Pi3 RetroPie | RFXcom 433E | 6 KAKU/COCO |
Harmony Hub | Panasonic TV | KODI (win) | YouLess | 4 x HS100 | VoxCommando (win) | Xiaomi gateway | sensors | scripts

User avatar
thecosmicgate
Posts: 249
Joined: Monday 06 April 2015 14:37
Target OS: Linux
Domoticz version: newest
Location: The Netherlands / Hoeven
Contact:

Re: Duco rf ventilation remote

Post by thecosmicgate » Saturday 09 April 2016 21:42

Hope this will be implemented.
It's nice to be important, but it's more important to be nice
Scooter ;)

leoncornelissen
Posts: 33
Joined: Monday 27 April 2015 20:33
Target OS: Raspberry Pi
Domoticz version: 3.8258
Location: Netherlands
Contact:

Re: Duco rf ventilation remote

Post by leoncornelissen » Sunday 01 January 2017 14:30

I'm very interested if this is implemented somehow in the mean while.
We bought a new house which contains a Duco box. My current Perilex solution does not fit there. The system works with RF but I hope there is a solution with RFXcom. Otherwhise I have to capture the signal myself and build a own solution.

pvm
Posts: 932
Joined: Tuesday 17 June 2014 22:14
Target OS: NAS (Synology & others)
Domoticz version: Stable
Location: NL
Contact:

Duco rf ventilation remote

Post by pvm » Thursday 29 June 2017 9:08

Any updates on this topic?
I'm also looking for a solution to connect to duco box. Now I'm using it with 2 rf sensors.

I did find this 'schakel contact' (switch contact) http://www.duco.eu/nl-nl-producten/nl-n ... kelcontact

Is that the way to go?
Synology NAS, PI3, ZWave, Xiamo zigbee devices, BTLE plant sensor

emiel
Posts: 1
Joined: Friday 11 March 2016 17:51
Target OS: -
Domoticz version:
Contact:

Re: Duco rf ventilation remote

Post by emiel » Friday 29 September 2017 16:39

Stuntteam wrote:
Monday 21 December 2015 1:19
Hi,

The Duco is, so far, not supported.
Use the RFLink Loader program and record the button signals with the debug mode.
Hi Stuntteam

I've tried both 'Debug' and 'Unhandled' mode, but the tool doesn't show any signals.
Is there anything else I can try?

FYI, my module does detect other (supported) devices.

User avatar
thecosmicgate
Posts: 249
Joined: Monday 06 April 2015 14:37
Target OS: Linux
Domoticz version: newest
Location: The Netherlands / Hoeven
Contact:

Re: Duco rf ventilation remote

Post by thecosmicgate » Friday 13 October 2017 22:45

I think because Duco uses 866mhz

Sent from my SM-G935F using Tapatalk

It's nice to be important, but it's more important to be nice
Scooter ;)

User avatar
Stuntteam
Posts: 435
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Duco rf ventilation remote

Post by Stuntteam » Saturday 14 October 2017 1:06

The Duco is using 868 mhz with FSK modulation.
We are working on it.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

aDJa
Posts: 2
Joined: Monday 11 September 2017 10:51
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Friesland
Contact:

Re: Duco rf ventilation remote

Post by aDJa » Sunday 04 February 2018 16:33

Re-do since previous post was removed..

Hi there,

This is my first post, I've already red many topics with great interest. Thanks for that, great to see so many people participate and help each other.I am also curious how to connect to the Duco box, haven't tried so far but would be nice to control it without placing the extra 'wireless switches' inside the box.

The search continous..
Raspberry Pi -
RFXCOM - RFXtrx433 -
P1 Smart Meter USB -
Arilux AL-LC04 -
Danui temp + humidity

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests