Wifi RFLink

433Mhz opensource Receiver & Transmitter.

Moderator: Stuntteam

Bladerer
Posts: 4
Joined: Tuesday 12 December 2017 10:07
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Wifi RFLink

Post by Bladerer » Tuesday 12 December 2017 14:34

Good to hear, I’ll be ordering my parts later Today. I have no experience with any of the components so I’m happy to hear how it works out for you and as I already asked @MaikelK, it would be nice to see some real-life photo’s of this setup.

MaikelK
Posts: 30
Joined: Saturday 01 November 2014 14:51
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Wifi RFLink

Post by MaikelK » Thursday 21 December 2017 14:04

Hi Guys,

Sorry, didnt had notifications set to this post....

It's quite easy with the dipswitches.
Fitting the RFlink to the board is the same as with the original AtMega board, no difference.

First set dipswitches to USB-->AtMega2560 and load firmware
Then set dipswitches to USB-->ESP and load firmware.
Then set dipswitches to ESP-->AtMega2560.

Had it up and running within 5 minutes and now already for more then a few weeks.
I'm powering it via a Samsung 5V-1A phone charger and a proper usb power cord.
Powering via the DC jack would probably be better.

Bladerer
Posts: 4
Joined: Tuesday 12 December 2017 10:07
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Wifi RFLink

Post by Bladerer » Thursday 21 December 2017 14:10

Thanks @Maikelk, mine was ordered and due to arrive in the next two weeks. Will post an update once installed.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests