Send commands

433Mhz opensource Receiver & Transmitter.

Moderator: Stuntteam

Post Reply
RueDesButtes
Posts: 4
Joined: Monday 26 March 2018 10:13
Target OS: Raspberry Pi
Domoticz version: 3.8153
Contact:

Send commands

Post by RueDesButtes » Thursday 10 May 2018 20:25

Hello,
I have just built my first RfLink:
  • Arduino mega 2560
    RXB6
    XD-FST FS1000A
The RF signals of my remote are successfully catched (3 buttons):
UP
20;02;Doorbell;ID=1f1b;SWITCH=1;CMD=ON;CHIME=01;
20;03;Eurodomest;ID=15c1c9;SWITCH=05;CMD=ON;
STOP
20;04;Doorbell;ID=1f1b;SWITCH=1;CMD=ON;CHIME=01;
20;05;Eurodomest;ID=15c1c9;SWITCH=07;CMD=OFF;
DOWN
20;06;Doorbell;ID=1f1b;SWITCH=1;CMD=ON;CHIME=01;
20;07;Eurodomest;ID=15c1c9;SWITCH=03;CMD=ON;

it seems the remote send 2 messages each time a button is pushed,
How can I reproduce it in Domoticz?

My remote is the same as the one in this page http://www.domowiki.fr/wiki/index.php/CY-801MT
How Can I enter commands manually like "11;20;0B;RFCustom;ID=524643;SWITCH=0;CMD=ON;" ?

Thanks

pipo114
Posts: 1
Joined: Monday 27 August 2018 13:59
Target OS: -
Domoticz version:
Contact:

Re: Send commands

Post by pipo114 » Monday 27 August 2018 14:15

Hello,

I'm new in the RfLink family.
I'm having trouble too, with my newly build RfLink (Arduino MEGA, Aurel RTX). BOught and built from https://www.nodo-shop.nl/nl/rflink-gate ... kabel.html
I've managed to receive signals from remote controls, but I can't send.

I choose to not create a new suject because RueDesButtes (hello french friend :) ), seems to have the same problem, with the "Eurodomest" protocol.

I have a projection screen which is powered by a module, with a RF control intragrated. Reference : http://www.duronic.com/products/Duronic ... ronic.html

In RFLink loader, I can receive the following command :
UP
20;03;Eurodomest;ID=15c1c9;SWITCH=05;CMD=ON;
STOP
20;05;Eurodomest;ID=15c1c9;SWITCH=07;CMD=OFF;
DOWN
20;07;Eurodomest;ID=15c1c9;SWITCH=03;CMD=ON;

But when I try to send a command, I get a OK return, but nothing happen. I just wonder why ?
Examples of command sent :
10;Eurodomest;ID=15c1c9;SWITCH=05;CMD=ON;
10;Eurodomest;ID=15c1c9;SWITCH=07;CMD=OFF;
10;Eurodomest;ID=15c1c9;SWITCH=03;CMD=ON;

Do you have any idea to help me ?

Thanks in advance

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests