Can RFLink and RFXtrx433E be connected at the same time?

433Mhz opensource Receiver & Transmitter.

Moderator: Stuntteam

Post Reply
User avatar
Bernd
Posts: 67
Joined: Tuesday 04 February 2014 9:44
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: The Netherlands, De Wijk
Contact:

Can RFLink and RFXtrx433E be connected at the same time?

Post by Bernd » Saturday 30 December 2017 16:52

I have a RPi 3 and RFXtrx433E up and running for 433.92 MHz equipment.
I am planning to add some Somfy blinds to my house, which work on 433.42 MHz.

In order to be able to receive the Somfy control signal all the time, I need a seperate receiver from the RFXtrx433E (which only transmits on 433.42), so I thought of RFLink 433.42. Of course I also transmit the commands for the Somfy by RFLink than.

Is it possible to have both the RFLink and RFXtrx connected to the RPi (running Domoticz) at the same time (simultanuous) and have the RFLink operating for the Somfy equipment only?

Thanks for the time you take to answer my question.
Raspberry Pi B3 (Stretch) with boot from USB stick - no SD-card inserted
RFXCOM RFXtrx433E, firmware version = 1022

User avatar
waaren
Posts: 928
Joined: Tuesday 03 January 2017 15:18
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Can RFLink and RFXtrx433E be connected at the same time?

Post by waaren » Saturday 30 December 2017 17:14

Hi Bernd,

I have an RFLink and RFXtrx433E both connected and active on my RPI 3.
So yes it's possible
Raspberry (debian stretch via berryboot on Synology DS916+) , Domoticz (almost) latest Beta, , dzVents 2.6, RFLink, RFXtrx433e, P1, Youless, Harmony, Hue, Yeelight, Xiaomi, HomeWizard, Zwave, Amazon echo

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest