RFlink support Visonic 868 devices

433Mhz opensource Receiver & Transmitter.

Moderator: Stuntteam

Post Reply
charlesh65
Posts: 3
Joined: Thursday 28 December 2017 19:36
Target OS: Raspberry Pi
Domoticz version:
Contact:

RFlink support Visonic 868 devices

Post by charlesh65 » Thursday 28 December 2017 22:09

Hi,

I recently bought an RFlink 868 gateway, so I could use my Visonic devices (868) within Domoticz. Today I soldered the connectors to the boards, uploaded the software and checked the debug log from the RFlink loader to see if some of the devices (MCT-302) were detected. When opening and closing the contact I saw data on the screen. So far so good, connected it to the RPi with Domoticz and added the hardware. Detected in the Domoticz log and even an init. Try to add the sensor with devices, but no luck. Although the Visonic devices are supported (?) by the RFlink, I can't configure them in Domotic.

Anyone tried this or had any luck with it? Suggestions?

Btw:the Visonic devices are not connected to a Powermax.

User avatar
phoenixblue
Posts: 83
Joined: Friday 25 November 2016 12:20
Target OS: Raspberry Pi
Domoticz version: 3.7392
Contact:

Re: RFlink support Visonic 868 devices

Post by phoenixblue » Saturday 06 January 2018 11:23

Hi,

As far I know are the visonic 868mhz sensors not yet supported by the RFLink.
When you check the debug screen you see the received signals but they are not decoded by the RFLink so you can not use them inside Domoticz.

Maybe there will be an support in the future.... I hope ;-)
scripts on github: Link

charlesh65
Posts: 3
Joined: Thursday 28 December 2017 19:36
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: RFlink support Visonic 868 devices

Post by charlesh65 » Wednesday 10 January 2018 22:02

Hi Phoenixblue,

The RFlink 868 certainly supports Visonic devices as of R45.
http://www.rflink.nl/blog2/devlist and look for the 868Mhz section.
Maybe one of the stuntteam member(s) can answer this question?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest