RFLink and Venetian Blinds

433Mhz opensource Receiver & Transmitter.

Moderator: Stuntteam

Post Reply
Twinsen
Posts: 21
Joined: Wednesday 20 July 2016 22:39
Target OS: -
Domoticz version:
Contact:

RFLink and Venetian Blinds

Post by Twinsen » Saturday 24 December 2016 10:05

Hi
After the last updates the STOP command for Venetian blinds is not working.
I have the Domoticz v. 3.6231 and RFLink v. 45

For UP and DOWN commands everything is working perfect.

Please help me to solve this issue.

Image

Code: Select all

2016-12-24 09:55:19.688 User: lgr initiated a switch command (7/Stanga/Stop)
2016-12-24 09:55:19.689 Error: RFLink: trying to send unknown switch command: 17

2016-12-24 09:55:46.101 User: lgr initiated a switch command (7/Stanga/On)
2016-12-24 09:55:46.103 RFLink Sending: 10;BrelMotor;b808be;a1;DOWN
2016-12-24 09:55:47.210 (RFLink) Light/Switch (Stanga)

2016-12-24 09:55:49.170 User: lgr initiated a switch command (7/Stanga/Off)
2016-12-24 09:55:49.171 RFLink Sending: 10;BrelMotor;b808be;a1;UP 
2016-12-24 09:55:50.315 (RFLink) Light/Switch (Stanga)


Twinsen
Posts: 21
Joined: Wednesday 20 July 2016 22:39
Target OS: -
Domoticz version:
Contact:

Re: RFLink and Venetian Blinds

Post by Twinsen » Monday 02 January 2017 18:09

I think that, the problem is generated in the last stable release...

Image

How can be solved this issue ?

Twinsen
Posts: 21
Joined: Wednesday 20 July 2016 22:39
Target OS: -
Domoticz version:
Contact:

Re: RFLink and Venetian Blinds

Post by Twinsen » Thursday 05 January 2017 21:50

Please, can someone help me ?

User avatar
Stuntteam
Posts: 436
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: RFLink and Venetian Blinds

Post by Stuntteam » Friday 06 January 2017 1:19

We will take a look asap.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

Twinsen
Posts: 21
Joined: Wednesday 20 July 2016 22:39
Target OS: -
Domoticz version:
Contact:

Re: RFLink and Venetian Blinds

Post by Twinsen » Friday 06 January 2017 23:05

Thank you for your answer.
I asked in general section and they told me that everything is ok and command is created correctly.

Twinsen
Posts: 21
Joined: Wednesday 20 July 2016 22:39
Target OS: -
Domoticz version:
Contact:

Re: RFLink and Venetian Blinds

Post by Twinsen » Tuesday 10 January 2017 19:38

Hi,

Can you help me with an update?

User avatar
Stuntteam
Posts: 436
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: RFLink and Venetian Blinds

Post by Stuntteam » Wednesday 11 January 2017 21:08

In some cases there was indeed something that did not work as planned.
A fix has been comitted..
Should be available in the next beta.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

Twinsen
Posts: 21
Joined: Wednesday 20 July 2016 22:39
Target OS: -
Domoticz version:
Contact:

Re: RFLink and Venetian Blinds

Post by Twinsen » Wednesday 11 January 2017 22:00

Thank you for your time and disponibility.
I will wait for next beta release to test it.

Twinsen
Posts: 21
Joined: Wednesday 20 July 2016 22:39
Target OS: -
Domoticz version:
Contact:

Re: RFLink and Venetian Blinds

Post by Twinsen » Thursday 12 January 2017 7:33

Everything is OK now
Thanks.

jordantheripper
Posts: 6
Joined: Sunday 17 December 2017 17:08
Target OS: Raspberry Pi
Domoticz version: 3.9208
Location: Italy
Contact:

Re: RFLink and Venetian Blinds

Post by jordantheripper » Tuesday 20 March 2018 10:42

I there.
Can you please tell me the way you solved the problem?
I'm searching for solution fom my venetian blinds.
Thanks so much

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests