TS-808 Wireless thermostat

Post Reply
joostvanderlinde
Posts: 22
Joined: Tuesday 23 June 2015 23:06
Target OS: Raspberry Pi
Domoticz version: 3.5877
Contact:

TS-808 Wireless thermostat

Post by joostvanderlinde » Friday 17 November 2017 18:10

To control my underfloor heating valve, I want to use a (wireless) thermostat that I also can control via RFXCom.
Using a simple KaKu switch and a temperature sensor linked via Domottiz could a solution, but the drawback is I cannot simply adjust the temperature in the room by 'pressing a switch'/

I found the TS-808 Wireless Thermostat that seems to be capable of what I want. It looks like a simpe 433MHz switch that is triggered by a temperature sensor/transmitter.
http://www.ebay.nl/itm/TS-808-RF-433MHz ... 2465102186

The specs I have only state that it is 433MHz...
Question is: Will it be controlable (read the transmitter / trigger the receiver) from Domoticz via my RFXCom?

joostvanderlinde
Posts: 22
Joined: Tuesday 23 June 2015 23:06
Target OS: Raspberry Pi
Domoticz version: 3.5877
Contact:

Re: TS-808 Wireless thermostat

Post by joostvanderlinde » Wednesday 03 January 2018 22:12

Solved differently.
Bought a cheap but good looking 220V tiuch screen thermostat on eBay
And bought a cheap KaKu clone from Action
Connected thermostat and KaKu clone in parallel to a 240V socket

The socket rhen gets power if either the thermostat or the KaKu are 'on'.

In addition I used a 240V relay to actually switch on/off my 24V Honeywell floor heating valve.

Now I can (manualy or in a blocky event) interfere (based on a temperature sensor I already have) the state of my floor heating...

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 4 guests