Digoo DG-HOSA 433MHz Water sensor

Post Reply
iLLiac4
Posts: 19
Joined: Thursday 31 August 2017 8:13
Target OS: -
Domoticz version:
Contact:

Digoo DG-HOSA 433MHz Water sensor

Post by iLLiac4 » Thursday 07 September 2017 7:52

Have got this sensor https://www.banggood.com/Digoo-DG-HOSA- ... 8532015010


It can communicate with Lightning4 and X10 protocol. Below you can see the logs from RFXmng.
Basically upper button sends Arm Away. Lower button sends Arm Home and is wired with water leakage sensor. So it is the same if you press lower button or shorten the wired sensor (simulates water leakage).

This sensor has also magnetic switch (like door sensors) and it sends the same signal as upper button.
When X10 protocol is enabled i can see the battery level but upper button always sends low voltage.

So basically this is it and it will help someone.


------------------------------------------------
7. 09. 2017 07:42:58
------------------------------------------------
7. 09. 2017 07:42:58
Packettype = Security1
subtype = X10 security
Sequence nbr = 31
id1-3 = 0339C0 decimal:211392
status = Arm Home
battery level = OK
Signal level = 7 -64dBm
------------------------------------------------
7. 09. 2017 07:43:07
------------------------------------------------
7. 09. 2017 07:43:07
Packettype = Security1
subtype = X10 security
Sequence nbr = 32
id1-3 = 0339C0 decimal:211392
status = Arm Home
battery level = OK
Signal level = 6 -72dBm
------------------------------------------------
7. 09. 2017 07:43:10
------------------------------------------------
7. 09. 2017 07:43:10
Packettype = Security1
subtype = X10 security
Sequence nbr = 33
id1-3 = 0339C0 decimal:211392
status = Arm Away
battery level = Low
Signal level = 6 -72dBm
------------------------------------------------
7. 09. 2017 07:43:24
------------------------------------------------
7. 09. 2017 07:43:24
Packettype = Security1
subtype = X10 security
Sequence nbr = 34
id1-3 = 0339C0 decimal:211392
status = Arm Away
battery level = Low
Signal level = 7 -64dBm
Last edited by iLLiac4 on Sunday 28 January 2018 6:14, edited 1 time in total.

nmaster
Posts: 102
Joined: Saturday 16 August 2014 17:17
Target OS: Linux
Domoticz version: 3.6304
Contact:

Re: Digoo DG-HOSA 433MHz Water sensor

Post by nmaster » Wednesday 13 September 2017 12:22

Hi, it looks interesting.

I wonder if other digoo sensors / remotes would work the same way with RFXCOM ?

https://www.banggood.com/Digoo-DG-HOSA- ... ether-auto

FunFair
Posts: 37
Joined: Wednesday 04 October 2017 11:29
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Digoo DG-HOSA 433MHz Water sensor

Post by FunFair » Saturday 09 December 2017 22:35

nmaster wrote:
Wednesday 13 September 2017 12:22
Hi, it looks interesting.

I wonder if other digoo sensors / remotes would work the same way with RFXCOM ?

https://www.banggood.com/Digoo-DG-HOSA- ... ether-auto
I just received the doorbell, but it doesn't seem to work. When press learn the rfxcom doesn't pick up anything.

FunFair
Posts: 37
Joined: Wednesday 04 October 2017 11:29
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Digoo DG-HOSA 433MHz Water sensor

Post by FunFair » Sunday 11 March 2018 17:24

FunFair wrote:
Saturday 09 December 2017 22:35
nmaster wrote:
Wednesday 13 September 2017 12:22
Hi, it looks interesting.

I wonder if other digoo sensors / remotes would work the same way with RFXCOM ?

https://www.banggood.com/Digoo-DG-HOSA- ... ether-auto
I just received the doorbell, but it doesn't seem to work. When press learn the rfxcom doesn't pick up anything.
Hooked it up to the rfx manager and enabled lightning 4. It seems to be working. The IR sensor is working good. The doorbell is a bit of a hit and miss. It sometimes sends out a different code.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests