Update external RFXtrx433 in Windows 10

Post Reply
Calzor Suzay
Posts: 142
Joined: Tuesday 08 July 2014 15:10
Target OS: Raspberry Pi
Domoticz version: 3.9629
Location: UK
Contact:

Update external RFXtrx433 in Windows 10

Post by Calzor Suzay » Sunday 13 March 2016 22:38

How do I do this?

I plug the RFXtrx433 in, it flashes red then amber and that's it, Windows doesn't do anything and in the latest RFXflash it just no com port found.

It's normally attached to a Raspberry Pi running Domoticz but I try that in the IP I get SocketException:10061 No connection could be made because the target machine actively refused it x.x.x.x:10001

:?: :?:

User avatar
Westcott
Posts: 548
Joined: Tuesday 09 December 2014 18:04
Target OS: Raspberry Pi
Domoticz version: Beta
Location: UK - Glos
Contact:

Re: Update external RFXtrx433 in Windows 10

Post by Westcott » Sunday 13 March 2016 22:56

For Windows, I think the RFXcom site has a link to some USB drivers.
Zwave - Sigma Z+ stick, Fibaro 2x FGSD002, FGMS001
Horstmann - 2x HRT4, 2x C-stat-11, 4x ASR-ZW, TKB 2x TZ56, 2x TZ68E
Max-EQ Cube, Valve, Neo 2x door
RFXtrx433E, RFlink - 1byone driveway, doorbell, Oregon and BangGood temp
Wifi - YeeLight RGB, 3x ESP8266

Calzor Suzay
Posts: 142
Joined: Tuesday 08 July 2014 15:10
Target OS: Raspberry Pi
Domoticz version: 3.9629
Location: UK
Contact:

Re: Update external RFXtrx433 in Windows 10

Post by Calzor Suzay » Monday 14 March 2016 1:29

Not unless it's buried somewhere else, perhaps hidden in RFXmanager?
http://www.rfxcom.com/downloads.htm

Calzor Suzay
Posts: 142
Joined: Tuesday 08 July 2014 15:10
Target OS: Raspberry Pi
Domoticz version: 3.9629
Location: UK
Contact:

Re: Update external RFXtrx433 in Windows 10

Post by Calzor Suzay » Monday 14 March 2016 1:31

Ok found it mentioned in the RFXmanager user guide pointing here http://www.ftdichip.com/Drivers/VCP.htm

Calzor Suzay
Posts: 142
Joined: Tuesday 08 July 2014 15:10
Target OS: Raspberry Pi
Domoticz version: 3.9629
Location: UK
Contact:

Re: Update external RFXtrx433 in Windows 10

Post by Calzor Suzay » Monday 14 March 2016 23:04

Yup added driver and sorted now :)

Although in Domoticz I'm fairly sure it used to say the firmware version and now it doesn't or just says version 1

MarnixO
Posts: 8
Joined: Sunday 24 September 2017 12:02
Target OS: NAS (Synology & others)
Domoticz version: V3.8153
Location: Destelbergen Belgium
Contact:

Re: Update external RFXtrx433 in Windows 10

Post by MarnixO » Monday 27 November 2017 15:04

My fresh Windows 10 installation does not recognize the RFXtrx , despite installation of ftdi drivers

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest