Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

CorGre
Posts: 3
Joined: Monday 04 January 2016 0:14
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by CorGre » Saturday 11 February 2017 1:35

Westcott wrote:I got one from Banggood - it worked straight away with RFXtrx

http://www.banggood.com/433MHz-Wireless ... 8820141020

I bought those but how do I see them in Domoticz?
They are on. But not visible. What setting does my RFXCOM need to communicate with them.

User avatar
Westcott
Posts: 548
Joined: Tuesday 09 December 2014 18:04
Target OS: Raspberry Pi
Domoticz version: Beta
Location: UK - Glos
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by Westcott » Saturday 11 February 2017 1:43

Enable Rubicson
Zwave - Sigma Z+ stick, Fibaro 2x FGSD002, FGMS001
Horstmann - 2x HRT4, 2x C-stat-11, 4x ASR-ZW, TKB 2x TZ56, 2x TZ68E
Max-EQ Cube, Valve, Neo 2x door
RFXtrx433E, RFlink - 1byone driveway, doorbell, Oregon and BangGood temp
Wifi - YeeLight RGB, 3x ESP8266

Andyyyy
Posts: 42
Joined: Saturday 13 July 2013 23:46
Target OS: -
Domoticz version:
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by Andyyyy » Friday 24 February 2017 15:31

CorGre wrote:
Westcott wrote:I got one from Banggood - it worked straight away with RFXtrx

http://www.banggood.com/433MHz-Wireless ... 8820141020

I bought those but how do I see them in Domoticz?
They are on. But not visible. What setting does my RFXCOM need to communicate with them.
I have the same with RFXTRX and Rubicson is enabled, but i get no new devices ...

SweetPants
Posts: 2174
Joined: Friday 12 July 2013 21:24
Target OS: Linux
Domoticz version: V4.9911
Location: The Netherlands
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by SweetPants » Friday 24 February 2017 15:40

Done "Accept new hardware" in settings?
Ubuntu 16.04.3 LTS, Intel NUC, MySensors 2.3.0-alpha, Pro Mini 3.3/8M RFM69(HW), ESP8266 (SDK2.2.0), Sonoff, RFLink, RFXcom, MQTT, NodeRed, Domoticz Beta (from source)

Andyyyy
Posts: 42
Joined: Saturday 13 July 2013 23:46
Target OS: -
Domoticz version:
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by Andyyyy » Friday 24 February 2017 15:46

Yes, i also tried the RFXmngr... only with rubicson/alecto/bangood activated...
but nothing to see...

I only have a RFXtrx433 !!! thats the reason why these sonsors wont work... :-(
Last edited by Andyyyy on Monday 27 February 2017 9:24, edited 1 time in total.

kubrik
Posts: 54
Joined: Wednesday 30 November 2016 16:07
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by kubrik » Friday 24 February 2017 16:58


rotero
Posts: 14
Joined: Saturday 13 June 2015 13:44
Target OS: Raspberry Pi
Domoticz version: V2.2284
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by rotero » Friday 24 February 2017 21:07

Andyyyy wrote:
CorGre wrote:
Westcott wrote:I got one from Banggood - it worked straight away with RFXtrx

http://www.banggood.com/433MHz-Wireless ... 8820141020

I bought those but how do I see them in Domoticz?
They are on. But not visible. What setting does my RFXCOM need to communicate with them.
I have the same with RFXTRX and Rubicson is enabled, but i get no new devices ...

Hi,

I ordered (and received) 2 of these Banggood thermometers, but I cannot use them.
They are working perfect with RFXCOM RFXtrx433E USB 433.92MHz Transceiver, but not with the Type2 firmware (which I need for my Philips power switches). They are working with the Ext & Ext2 firmware.
If someone is interested in these 2 Banggood thermometers, you can buy them from me for €17,00 (excl. shipping).
The good thing is: I live in the Netherlands (Nieuw-Vennep) and you don't have to wait 6 weeks for your order from China! :lol:

Please let me know if you are interested!

Regards,
Rob

kubrik
Posts: 54
Joined: Wednesday 30 November 2016 16:07
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by kubrik » Thursday 02 March 2017 12:25

Arrived... it works (Rubicson).

tjofras
Posts: 4
Joined: Wednesday 15 February 2017 16:03
Target OS: -
Domoticz version:
Location: Sweden
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by tjofras » Monday 20 March 2017 9:35

JohnBoy32 wrote:Only £ 7,70, looking better and (most likely like Cresta and Bresser etc.) of course made in China! Free shipping!

http://www.aliexpress.com/item/AOK-2011 ... 12106.html

I can confirm that these are working exactly as they should and also battery-life is fine. I do not have any complaints.

The only point I want to make is that it is old-fashioned to think that something bought on Amazon (or in a local shop) with a non-Chinese brand is made in Europe/US and therefore is better quality; most likely it is made in China and probably in the same factory.
Maybe the one with the nice English brand is made by child hands in People's Republic of Korea.
Please don’t fool yourself or others.
Can anyone please confirm these sensors still works with the rfxtrx433e and the latest firmware? I read someone was having problems with an AliExpress sensor and the latest rfxtrx-firmware?

Edit: I just realized the "product is no longer available", does anyone know of another temp/humid sensor that works with rfxtrx that is available on AliExpress now?

krizzz
Posts: 171
Joined: Wednesday 20 November 2013 21:36
Target OS: Linux
Domoticz version:
Location: The Netherlands
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by krizzz » Saturday 25 March 2017 11:57

I am also looking to expand my temperature sensors and the Cresta TX-320 which at my preferred supplier was around 10 euros is not any longer available. So i am looking for new opportunities.

kognor
Posts: 3
Joined: Wednesday 20 September 2017 8:57
Target OS: -
Domoticz version:
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by kognor » Wednesday 20 September 2017 9:01

https://www.banggood.com/DANIU-433MHz-W ... 8820141020

Hi,

How many of these can you use simultaneously next to each other connected to 1 domoticz system?

I want to monitor temp and humidity in about 7 rooms + 1 outdoor.

Is this possible connecting 8 of these sensors to 1 domoticz system? Or do the rf addresses interfere?

Thanks in advance for the information!

novakmi
Posts: 1
Joined: Saturday 01 April 2017 2:31
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by novakmi » Tuesday 24 October 2017 2:43

kognor wrote:
Wednesday 20 September 2017 9:01
https://www.banggood.com/DANIU-433MHz-W ... 8820141020

Hi,

How many of these can you use simultaneously next to each other connected to 1 domoticz system?

I want to monitor temp and humidity in about 7 rooms + 1 outdoor.

Is this possible connecting 8 of these sensors to 1 domoticz system? Or do the rf addresses interfere?

Thanks in advance for the information!
These sensors offer only 3 channels. So 3 of these is OK. More will probably interfere.

marxkemp
Posts: 10
Joined: Sunday 17 January 2016 14:22
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by marxkemp » Tuesday 24 October 2017 7:21

I got these in 3 rooms and 1 outdoors

kognor
Posts: 3
Joined: Wednesday 20 September 2017 8:57
Target OS: -
Domoticz version:
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by kognor » Tuesday 24 October 2017 7:58

I thought I let you guys know...

In the meantime i'm testing with 5 of these on the same channel. Now running 3 weeks next to eachother without any interference.

Don't know yet about batterij life...?!

User avatar
LouiS22
Posts: 483
Joined: Friday 27 February 2015 14:21
Target OS: Raspberry Pi
Domoticz version: beta
Location: Budapest, Hungary
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by LouiS22 » Tuesday 24 October 2017 10:59

kognor wrote:
Tuesday 24 October 2017 7:58
I thought I let you guys know...

In the meantime i'm testing with 5 of these on the same channel. Now running 3 weeks next to eachother without any interference.

Don't know yet about batterij life...?!
Great news, but there will be a point (in theory) when two of them are gonna report in the exact same second which may result in interference.

kognor
Posts: 3
Joined: Wednesday 20 September 2017 8:57
Target OS: -
Domoticz version:
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by kognor » Wednesday 25 October 2017 17:52

I have my thoughts about the accuracy of the humidity on these daniu sensors. Any info would greatly help! Because I have no idea if I'm looking at correct data :-s

Anyone have any experience with the correctness of the measurements?

iffen5
Posts: 13
Joined: Tuesday 17 January 2017 12:59
Target OS: Raspberry Pi
Domoticz version:
Contact:

looking for a thermometer that can handle high temperatures

Post by iffen5 » Wednesday 01 November 2017 11:08

I have used Rubicson's bending thermometer but it works badly. Is anyone who has tried any other thermometer or solution where you can measure temperatures up to 300 degrees?

Rgds Ingemar

Jantje007
Posts: 3
Joined: Sunday 04 February 2018 14:41
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Netherlands
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by Jantje007 » Sunday 04 February 2018 15:10

- R-Pi2B Domoticz V3.8153
- RFXtrx433E Version: Ext/1024

Just received this kit.
Sensor works perfect.

Excelvanv AOK-5060C, sensor AOK-2026 (recognized as: Rubicson/IW008T/TX95)
https://nl.aliexpress.com/item/EXCELVAN ... 05265.html
- R-Pi2B Domoticz V3.8153
- RFXtrx433E Version: Ext/1024
- OpenZWave USB Version: 1.4-2501
- Fibaro, KaKu, Eth008 Devantech, Cresta + cheap Chinese sensors

Joep123
Posts: 15
Joined: Monday 26 March 2018 18:44
Target OS: Raspberry Pi
Domoticz version: Beta
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by Joep123 » Friday 27 April 2018 20:12

kognor wrote:
Wednesday 25 October 2017 17:52
I have my thoughts about the accuracy of the humidity on these daniu sensors. Any info would greatly help! Because I have no idea if I'm looking at correct data :-s

Anyone have any experience with the correctness of the measurements?
You're right. The humidity sensor is not accurate. My Kerui sensor showed 79% after showering and the Daniu sensor 52% :roll:
In my living room (next to each other) 48% (Kerui) - 44% (Daniu).

User avatar
DeBaat
Posts: 29
Joined: Saturday 27 January 2018 15:52
Target OS: NAS (Synology & others)
Domoticz version: V3.8153
Contact:

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Post by DeBaat » Tuesday 01 May 2018 18:33

Hai All,
I just recieved my Digoo TH1980 sensor set for temperature measurments for both indoor and outdoor.
After I inserted the batteries, it almost immediately showed in my Domoticz installation running on my Synology with an RFXCOM RFXtrx433E.

However, as I would expect both temperature values, it shows temperature and humidity values.

Already tried to reset the connection with both the domoticz as the communication between both sensor devices.

Any suggestions on how to fix this?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest