There is Somfy in the air!!

Peterb
Posts: 5
Joined: Friday 27 January 2017 13:53
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: There is Somfy in the air!!

Post by Peterb » Sunday 26 November 2017 11:16

Sorry if I'm missing something obvious but how do I get my blinds to tilt to midway? So far I have found that if the device is set as 'Venetian Blinds US' then I can make them go all the way up and down and manually stop them mid way via the domoticz panel. And if I change the device to 'Venetian BlinDS EU' I can make them tilt. But how can I can control the tilt and lift independently and how can I make them tilt midway?

User avatar
DeBaat
Posts: 31
Joined: Saturday 27 January 2018 15:52
Target OS: NAS (Synology & others)
Domoticz version: V3.8153
Contact:

Re: There is Somfy in the air!!

Post by DeBaat » Wednesday 31 January 2018 14:34

Hai,
You probably have a multi-channel remote with 2-channels for each blind.
So I think you should mimic this by defining two independent switches for both Tilt and Lift.
E.g. "Blind Tilt" and "Blind Lift", each set to its own configuration.

astrapowerrr
Posts: 60
Joined: Tuesday 31 January 2017 21:34
Target OS: -
Domoticz version:
Contact:

Re: There is Somfy in the air!!

Post by astrapowerrr » Thursday 12 July 2018 11:44

morilm wrote:
Sunday 12 February 2017 13:25
Hi there,

Do any have been able to create a Lua script to have a kind of timer for the sonfy blinds?

Using the Venetian blinds the "stop" button works, but it will be nice to have some control (a % like) by timer for those having Sonfy.

This will allow to open/close them for 5-10 secs instead off full open/close status. (Send 'on' and after 10 sec send 'stop')

Thanks for the help ;)
Miguel


any news on this?

Gravityz
Posts: 266
Joined: Wednesday 16 December 2015 20:13
Target OS: NAS (Synology & others)
Domoticz version: V3.8637
Location: Netherlands
Contact:

Re: There is Somfy in the air!!

Post by Gravityz » Monday 06 August 2018 13:13

just a quick question
it seems that if you have multiple screens controlled by one remote(telis 4 channel) it might be better to use one code for all and different unit codes.

ID 01 22 11 unit code 1
ID 01 22 11 unit code 2
ID 01 22 11 unit code 3
ID 01 22 11 unit code 4

my question
how can i tell is a code is already in the somfy screen?
what default codes are used by somfy for the first, second remote(so i know which ones to avoid)
what happens if i choose a code which is already used by the default remote? will it work but get out of sync.

morilm
Posts: 32
Joined: Friday 27 January 2017 13:57
Target OS: OS X
Domoticz version:
Contact:

Re: There is Somfy in the air!!

Post by morilm » Saturday 18 August 2018 11:01

astrapowerrr wrote:
Thursday 12 July 2018 11:44
morilm wrote:
Sunday 12 February 2017 13:25
Hi there,

Do any have been able to create a Lua script to have a kind of timer for the sonfy blinds?

Using the Venetian blinds the "stop" button works, but it will be nice to have some control (a % like) by timer for those having Sonfy.

This will allow to open/close them for 5-10 secs instead off full open/close status. (Send 'on' and after 10 sec send 'stop')

Thanks for the help ;)
Miguel


any news on this?
I'm afraid not... :cry:

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest