There is Somfy in the air!!

Peterb
Posts: 3
Joined: Friday 27 January 2017 13:53
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: There is Somfy in the air!!

Post by Peterb » Sunday 26 November 2017 11:16

Sorry if I'm missing something obvious but how do I get my blinds to tilt to midway? So far I have found that if the device is set as 'Venetian Blinds US' then I can make them go all the way up and down and manually stop them mid way via the domoticz panel. And if I change the device to 'Venetian BlinDS EU' I can make them tilt. But how can I can control the tilt and lift independently and how can I make them tilt midway?

User avatar
DeBaat
Posts: 29
Joined: Saturday 27 January 2018 15:52
Target OS: NAS (Synology & others)
Domoticz version: V3.8153
Contact:

Re: There is Somfy in the air!!

Post by DeBaat » Wednesday 31 January 2018 14:34

Hai,
You probably have a multi-channel remote with 2-channels for each blind.
So I think you should mimic this by defining two independent switches for both Tilt and Lift.
E.g. "Blind Tilt" and "Blind Lift", each set to its own configuration.

astrapowerrr
Posts: 59
Joined: Tuesday 31 January 2017 21:34
Target OS: -
Domoticz version:
Contact:

Re: There is Somfy in the air!!

Post by astrapowerrr » Thursday 12 July 2018 11:44

morilm wrote:
Sunday 12 February 2017 13:25
Hi there,

Do any have been able to create a Lua script to have a kind of timer for the sonfy blinds?

Using the Venetian blinds the "stop" button works, but it will be nice to have some control (a % like) by timer for those having Sonfy.

This will allow to open/close them for 5-10 secs instead off full open/close status. (Send 'on' and after 10 sec send 'stop')

Thanks for the help ;)
Miguel


any news on this?

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests