NodeMCU does not reboot

Subforum for the 'MySensors' project.
http://www.mysensors.org/
Post Reply
User avatar
emme
Posts: 644
Joined: Monday 27 June 2016 11:02
Target OS: Raspberry Pi
Domoticz version: latest
Location: Milano, Italy
Contact:

NodeMCU does not reboot

Post by emme » Thursday 29 June 2017 8:25

uh... got an issue :roll: :roll:

I discovered that my nodeMCU (MySens gtw + temp sensor + rain sensor) does not reboot...

well it does only if I unplug the rain sensor that is a NC contact con D4
...id D4 used for other stuff than a simple DI contact? I could not find anything on it... just find something about D1
ciao
M
That's one small step for a programmer, one giant leap for me!
- - - - -
Raspberry Pi3 + AeonStick G5 + RFXCOMM433 + iRTrans Server + NodeJS
There's no stress in the mess!!

randytsuch
Posts: 87
Joined: Sunday 20 March 2016 19:56
Target OS: Raspberry Pi
Domoticz version: Beta
Location: LA, Ca USA
Contact:

Re: NodeMCU does not reboot

Post by randytsuch » Thursday 29 June 2017 17:00

D4 is GPIO2 this has to be high at boot.
D3 is GPIO0, also has to be high
D8 is GPIO15, has to be low.

Randy

User avatar
emme
Posts: 644
Joined: Monday 27 June 2016 11:02
Target OS: Raspberry Pi
Domoticz version: latest
Location: Milano, Italy
Contact:

Re: NodeMCU does not reboot

Post by emme » Thursday 29 June 2017 17:03

thanks...
looks like I have to change D4 to something else... or replace the NC to a NO switch
That's one small step for a programmer, one giant leap for me!
- - - - -
Raspberry Pi3 + AeonStick G5 + RFXCOMM433 + iRTrans Server + NodeJS
There's no stress in the mess!!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest