Selve blinds

Subforum for general discussions. Do not dump your questions/problems here, but try to find the subforum where it belongs!
Post Reply
manjh
Posts: 354
Joined: Saturday 27 February 2016 13:49
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: NL
Contact:

Selve blinds

Post by manjh » Tuesday 16 January 2018 14:06

A friend owns a house that is equipped with Selve blinds, and he would like to control them using Domoticz.
Before investing in an 868 version of RFLink, can someone share experience with this brand?
In other words, will Domoticz support the control of these blinds?
Hans

User avatar
bewo
Posts: 43
Joined: Monday 13 July 2015 12:27
Target OS: Linux
Domoticz version: 4.10***
Location: Vilshofen - Bavaria - Germany
Contact:

Re: Selve blinds

Post by bewo » Wednesday 02 May 2018 15:53

Hi manjh,

i've the same thing to do... :D Did you test the RFlink with the selve blinds?

Thanks & best regards,
bewo
Individual projects:
Domoticz on a Intel Xeon Server | AeonLabs Z-Wave Gen.5 | RFXCOM RFXtrx433E USB | ESP-Wifi-Modules
Wall-mounted iPad (self construct) | LUA wind monitor| LUA thermostat control | and many many more :)

manjh
Posts: 354
Joined: Saturday 27 February 2016 13:49
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: NL
Contact:

Re: Selve blinds

Post by manjh » Wednesday 02 May 2018 16:31

No, I don't have an 868 version of the RFLink, and am reluctant to buy it unless 100% sure that it will work.
Hans

User avatar
bewo
Posts: 43
Joined: Monday 13 July 2015 12:27
Target OS: Linux
Domoticz version: 4.10***
Location: Vilshofen - Bavaria - Germany
Contact:

Re: Selve blinds

Post by bewo » Wednesday 02 May 2018 21:51

Ok.. i've ordered a 868Mhz-RFLink and will test this... ;)
Individual projects:
Domoticz on a Intel Xeon Server | AeonLabs Z-Wave Gen.5 | RFXCOM RFXtrx433E USB | ESP-Wifi-Modules
Wall-mounted iPad (self construct) | LUA wind monitor| LUA thermostat control | and many many more :)

zimou13
Posts: 1
Joined: Wednesday 21 March 2018 4:05
Target OS: Windows
Domoticz version:
Contact:

Re: Selve blinds

Post by zimou13 » Sunday 06 May 2018 11:03

This is not a description for the RF communication but a description of the communication between a computer and the USB-dongle, the USB-dongle is providing the RF communication to the roller blinds.
ShowBox Kodi Lucky Patcher
The USB connection can be established by a virtual
COM port or directly via USB with the corresponding
driver.
Communication parameters:
USB controller: FTDI FT234XD (USB 2.0)
www.ftdichip.com
USB driver support: FTDI provides a driver for:
Windows, MAC, Linux, Android
COM Port Baud Rate: 115.200 baud
COM Port Data: 8 Bit
COM Port Parity: none
COM Port Stop: 1 Bit
Last edited by zimou13 on Monday 07 May 2018 13:36, edited 1 time in total.

User avatar
bewo
Posts: 43
Joined: Monday 13 July 2015 12:27
Target OS: Linux
Domoticz version: 4.10***
Location: Vilshofen - Bavaria - Germany
Contact:

Re: Selve blinds

Post by bewo » Sunday 06 May 2018 12:38

Hi zimou13,

the communication with the RFlink-chip ist absolutely NO problem... No matter what OS. :P
The question ist, if it's possible to get the SELVE-blinds working with...
The frequency is known, but that's only a little part of the way.... (In my opinion...).

Best regards from Bavaria,
bewo
Individual projects:
Domoticz on a Intel Xeon Server | AeonLabs Z-Wave Gen.5 | RFXCOM RFXtrx433E USB | ESP-Wifi-Modules
Wall-mounted iPad (self construct) | LUA wind monitor| LUA thermostat control | and many many more :)

Cybirian
Posts: 3
Joined: Sunday 05 August 2018 13:33
Target OS: -
Domoticz version:
Contact:

Re: Selve blinds

Post by Cybirian » Sunday 05 August 2018 13:38

Hi,

I'm new to this, just setup my PI and added a nanocul transmitter.
The nanocul has been recognized how ever I want to use it to control my Selve Blinds and do not know how to set it up correct in Domoticz.
I selected RFLink Gateway USB for Hardware but do not know the commands to use the option : Create RFLink Devices

Any help would be great.

Cybirian
Posts: 3
Joined: Sunday 05 August 2018 13:33
Target OS: -
Domoticz version:
Contact:

Re: Selve blinds

Post by Cybirian » Thursday 30 August 2018 13:52

Anybody got lucky to control his Selve Blinds?
Another option is to by the Selve USB https://www.selve.de/en/about-selve/new ... 869dddb37a
I'm considering buying that module. €95

0101salman00
Posts: 1
Joined: Wednesday 31 October 2018 16:02
Target OS: Linux
Domoticz version:
Contact:

Re: Selve blinds

Post by 0101salman00 » Wednesday 31 October 2018 16:08

Note that we still have lots of debug data that is currently being analysed to be added to the RFLink code.
Also we have many support requests that we are working on. However, there are so many requests that it is hard to answer everyone promptly. If you did not get a reply or solution yet, please know that we are working on it and have not forgotten. Also, we are making good progress with various 868mhz and 2.4Ghz devices. More is being tested for the next release.Gbwhatsapp showbox vidmate cartoon HD popcorn time mobdro terrarium TV videoder

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest