Domotics touchscreen remote

In this subforum you can show projects you have made, or you are busy with. Please create your own topic.
User avatar
ledfreak3d
Posts: 78
Joined: Sunday 01 November 2015 16:30
Target OS: Linux
Domoticz version: 3.8025
Location: Hoorn
Contact:

Domotics touchscreen remote

Post by ledfreak3d » Sunday 17 September 2017 20:21

been tinkering around with my esp8266 and nextion display and came up with this

Latest Version

https://www.youtube.com/watch?v=c9OlHDThYEU&t


version 1

https://www.youtube.com/watch?v=8l1OMS5RgYA

version 2

https://www.youtube.com/watch?v=cjk7dPBZKyQ

version 3

https://www.youtube.com/watch?v=eGgEL6HHckQ

its still a work in progress but it turned out realy nice
also supports ota updates via a web interface
Last edited by ledfreak3d on Friday 13 April 2018 19:03, edited 1 time in total.
Unleashe the magic smoke ;)

blauwebuis
Posts: 310
Joined: Wednesday 21 December 2016 10:11
Target OS: Raspberry Pi
Domoticz version: current
Contact:

Re: Domotics touchscreen remote

Post by blauwebuis » Monday 18 September 2017 11:24

Very nice. Is that a custom front end?

User avatar
EdwinK
Posts: 1148
Joined: Sunday 22 January 2017 22:46
Target OS: Raspberry Pi
Domoticz version: BETA
Location: Rhoon
Contact:

Re: Domotics touchscreen remote

Post by EdwinK » Monday 18 September 2017 11:51

I like the Star Trek one :)
Running latest BETA on a Pi-3 | Toon Thermostat | RFxcom | Dashticz V2 |

jackslayter
Posts: 226
Joined: Tuesday 07 October 2014 11:00
Target OS: Raspberry Pi
Domoticz version: LastBeta
Location: France RA
Contact:

Re: Domotics touchscreen remote

Post by jackslayter » Monday 18 September 2017 14:48

Need !!
RPi2 + RFLink, Domoticz
Chacon - micromodule 200w, remote 3b, 2x module 1000w, remote 16b, smoke detector, door contact, 2x 3500w plug
Oregon - 3x Thgr122Nx / OWL - CM180 / TRC02_2 RGB / Cheap - PiR, door contact, Temp Hum / 4x REVOLT NC5461

User avatar
heggink
Posts: 439
Joined: Tuesday 08 September 2015 21:44
Target OS: Raspberry Pi
Domoticz version: V3.7067
Location: NL
Contact:

Re: Domotics touchscreen remote

Post by heggink » Monday 18 September 2017 21:06

Those displays are pretty magnificent. Not cheap tho for the bigger ones.
Pi3, latest beta
RFXCOM, z-wave (AEOTEC, switches, temhum, pir, contacts),
Plugwise2py, P1 'smart'meter & solar panel
Alexa, Wifi Cams motion detection
ESP: relays, PIR & Temp/TempHum
Geofence iCloud, Bluetooth & Wifi ping
Harmony hub, Nest

dannybloe
Posts: 1405
Joined: Friday 29 August 2014 11:26
Target OS: Raspberry Pi
Domoticz version:
Location: Ermelo
Contact:

Re: Domotics touchscreen remote

Post by dannybloe » Tuesday 19 September 2017 7:46

This is awesome! I do like the star trek one the best. Didn't know about that display. Cool stuff.
Creator dzVents - RPi3, loads of zwave devices, esp8266, evohome.

bilbolodz
Posts: 12
Joined: Wednesday 15 March 2017 10:43
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Domotics touchscreen remote

Post by bilbolodz » Thursday 05 October 2017 12:10

ledfreak3d wrote:
Sunday 17 September 2017 20:21
been tinkering around with my esp8266 and nextion display and came up with this
Are you going to share your project?

User avatar
ledfreak3d
Posts: 78
Joined: Sunday 01 November 2015 16:30
Target OS: Linux
Domoticz version: 3.8025
Location: Hoorn
Contact:

Re: Domotics touchscreen remote

Post by ledfreak3d » Tuesday 17 October 2017 12:24

Yep sure are

for anybody that's wants it just contact me


new version has had a lot of updates both in the code as in the gui
Attachments
3.JPG
3.JPG (34.66 KiB) Viewed 2535 times
2.JPG
2.JPG (42.83 KiB) Viewed 2535 times
1.JPG
1.JPG (34.48 KiB) Viewed 2535 times
Unleashe the magic smoke ;)

User avatar
rbo0567
Posts: 12
Joined: Thursday 13 April 2017 16:41
Target OS: Linux
Domoticz version: v3.8153
Location: 's-Hertogenbosch
Contact:

Re: Domotics touchscreen remote

Post by rbo0567 » Tuesday 17 October 2017 13:32

Is it possible to use it as an alarm keypad? Are you considering to implement that in your project?
I would really like this because I can't find a nice and good featured alarm keypad to use with domoticz.

User avatar
ledfreak3d
Posts: 78
Joined: Sunday 01 November 2015 16:30
Target OS: Linux
Domoticz version: 3.8025
Location: Hoorn
Contact:

Re: Domotics touchscreen remote

Post by ledfreak3d » Tuesday 17 October 2017 14:01

not sure but I can investigate
if its possible to send json commands for the keypad then it should be possible
Unleashe the magic smoke ;)

User avatar
ledfreak3d
Posts: 78
Joined: Sunday 01 November 2015 16:30
Target OS: Linux
Domoticz version: 3.8025
Location: Hoorn
Contact:

Re: Domotics touchscreen remote

Post by ledfreak3d » Tuesday 13 February 2018 22:24

Latest version is here

now has a couple of new options

-ftp server onboard for uploading config files
-config can be changed via build in webserver
-battery status is reported back to domoticz.
-voice updates are possible now via the remote hw info will folow
-battery last atleast a full day with a 2600 mAh Lipo

https://github.com/ledfreak3d/Domoticz-remote-
Unleashe the magic smoke ;)

alexsh1
Posts: 274
Joined: Wednesday 30 September 2015 11:50
Target OS: Raspberry Pi
Domoticz version: v3.8975
Location: United Kingdom
Contact:

Re: Domotics touchscreen remote

Post by alexsh1 » Wednesday 14 March 2018 18:08

ledfreak3d wrote:
Tuesday 13 February 2018 22:24
Which Nextion display do you use please?
Could you share your 3D enclosure files as well?

Many thanks

User avatar
ledfreak3d
Posts: 78
Joined: Sunday 01 November 2015 16:30
Target OS: Linux
Domoticz version: 3.8025
Location: Hoorn
Contact:

Re: Domotics touchscreen remote

Post by ledfreak3d » Wednesday 14 March 2018 21:29

Hi.

I use the 3.5 inch version
there is a case i designed for it on thingiverse.
make sure you download the version with the usb port cutout

https://www.thingiverse.com/thing:1708255
Unleashe the magic smoke ;)

User avatar
ledfreak3d
Posts: 78
Joined: Sunday 01 November 2015 16:30
Target OS: Linux
Domoticz version: 3.8025
Location: Hoorn
Contact:

Re: Domotics touchscreen remote

Post by ledfreak3d » Friday 13 April 2018 14:07

Unleashe the magic smoke ;)

tontze
Posts: 327
Joined: Thursday 12 January 2017 16:30
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Domotics touchscreen remote

Post by tontze » Friday 13 April 2018 14:12

Very nice !
-----------------------------------------
Rpi 3 / Razberry 2
RFLink 433mhz / Nrf 2.4Ghz
Mi Light
ESP82xx

dannybloe
Posts: 1405
Joined: Friday 29 August 2014 11:26
Target OS: Raspberry Pi
Domoticz version:
Location: Ermelo
Contact:

Re: Domotics touchscreen remote

Post by dannybloe » Friday 13 April 2018 14:23

Is this also a nice solution to create a security panel with?
Creator dzVents - RPi3, loads of zwave devices, esp8266, evohome.

User avatar
ledfreak3d
Posts: 78
Joined: Sunday 01 November 2015 16:30
Target OS: Linux
Domoticz version: 3.8025
Location: Hoorn
Contact:

Re: Domotics touchscreen remote

Post by ledfreak3d » Friday 13 April 2018 14:41

should be possible i think
Unleashe the magic smoke ;)

User avatar
ledfreak3d
Posts: 78
Joined: Sunday 01 November 2015 16:30
Target OS: Linux
Domoticz version: 3.8025
Location: Hoorn
Contact:

Re: Domotics touchscreen remote

Post by ledfreak3d » Wednesday 25 April 2018 7:56

need some help with gui optimization and code cleanup and add some features and need some people for testing
Unleashe the magic smoke ;)

User avatar
BigDog
Posts: 300
Joined: Tuesday 17 September 2013 13:59
Target OS: Raspberry Pi
Domoticz version: V3.9269
Location: The Netherlands
Contact:

Re: Domotics touchscreen remote

Post by BigDog » Wednesday 25 April 2018 8:42

WOW i really would like this one!
it it easy to adjust to personal situation?
and the "how to make it" is it good to do for a beginning electronica person , i can make some prints but not so advanced and i need a schematics
1X Raspberry1B : Domoticz V3.8153 [Linux ver. 4.14.34+ #1110]
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3 Mysensors
3X Cresta Thermo-hygro sensor
6X ESP8266: easy firmware(Testing)
1X 8 Channel Relay Web Control Ethernet interface(Testing)

User avatar
BigDog
Posts: 300
Joined: Tuesday 17 September 2013 13:59
Target OS: Raspberry Pi
Domoticz version: V3.9269
Location: The Netherlands
Contact:

Re: Domotics touchscreen remote

Post by BigDog » Wednesday 25 April 2018 9:23

question: do you guysd know where to get a printed version of this "Nextion housing for 3.5 inch"
or some place where to get a good housing for this project?
1X Raspberry1B : Domoticz V3.8153 [Linux ver. 4.14.34+ #1110]
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3 Mysensors
3X Cresta Thermo-hygro sensor
6X ESP8266: easy firmware(Testing)
1X 8 Channel Relay Web Control Ethernet interface(Testing)

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests