Step by step guide: Visonic Powermax Pro integration

In this subforum you can show projects you have made, or you are busy with. Please create your own topic.
Holland
Posts: 353
Joined: Friday 12 July 2013 13:53
Target OS: Raspberry Pi
Domoticz version: Beta Ch
Location: The Netherlands
Contact:

Re: Step by step guide: Visonic Powermax Pro integration

Post by Holland » Monday 13 November 2017 23:03

@BornToKill

Well done. Wouldn't have found the solution myself. Strange that it is related to a new firmware version.

This is temp solution, but Pmaxd should be able to run also on kernel 4.9

Have you, or anyone else already compiled Pmaxd on kernel 4.9? Does that make a difference?

BornToKill
Posts: 12
Joined: Sunday 18 September 2016 9:41
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Step by step guide: Visonic Powermax Pro integration

Post by BornToKill » Tuesday 14 November 2017 10:04

Yes recompilation doesn’t make it works :/

Holland
Posts: 353
Joined: Friday 12 July 2013 13:53
Target OS: Raspberry Pi
Domoticz version: Beta Ch
Location: The Netherlands
Contact:

Re: Step by step guide: Visonic Powermax Pro integration

Post by Holland » Wednesday 15 November 2017 10:56

Anyone already contacted ayasystems ?

Otherwise I could do that

fridde
Posts: 2
Joined: Thursday 18 January 2018 12:31
Target OS: Raspberry Pi
Domoticz version:
Location: Sweden
Contact:

Re: Step by step guide: Visonic Powermax Pro integration

Post by fridde » Saturday 03 February 2018 10:45

Hi,

I'm trying this installation now, but I'm stuck right in the beginning.
This web page seems to be down.
Anyone have the file needed somewhere else online?
Holland wrote:
Saturday 19 March 2016 16:35

Code: Select all

$ wget http://www.xpl4java.org/xPL4Linux/downloads/xPLLib.tgz

fridde
Posts: 2
Joined: Thursday 18 January 2018 12:31
Target OS: Raspberry Pi
Domoticz version:
Location: Sweden
Contact:

Re: Step by step guide: Visonic Powermax Pro integration

Post by fridde » Tuesday 13 February 2018 9:43

Got it to work. The files I needed was available on GitHub.

Code: Select all

https://github.com/Tieske/xPL4Linux
If you want "door open" statuses to work, you should use

Code: Select all

https://github.com/ayasystems/pmaxd.git
instead of

Code: Select all

https://github.com/viknet365/pmaxd.git

ejcosta
Posts: 1
Joined: Wednesday 07 March 2018 16:09
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Step by step guide: Visonic Powermax Pro integration

Post by ejcosta » Thursday 08 March 2018 16:54

Hi,
Probably an extreme dumb question, apologize if it's the case, but why we cannot use the serial port available on raspberry to communicate directly with powermax?

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests