Notifymyandroid results in error, although key is OK Topic is solved

Post Reply
marin849
Posts: 75
Joined: Tuesday 27 May 2014 10:36
Target OS: Raspberry Pi
Domoticz version: 2.4xxx
Location: Sweden
Contact:

Notifymyandroid results in error, although key is OK

Post by marin849 » Monday 04 July 2016 23:09

I have had the problem for a few months that NMA notification doesn't work so decided to check today.
I have created a new API-key, and tested it with the verify-url, then I sent a test message as an URL-string through the web-browser to check that it works. It does!

Then I tried this on the pi running Domoticz.

Code: Select all

[email protected] ~ $ wget "https://www.notifymyandroid.com/publicapi/notify?apikey=yesmykeywashere&application=%22Domoticz%22&message=%22test%22&event=%22testevent%22&description=%22inget%22"
That works as well!

Problem is in Domoticz I only get "Problem sending, check API-key" when I test the notification, and in the log it only says:

Code: Select all

 2016-07-04 23:02:51.080 Error: NMA:
2016-07-04 23:02:51.080 Error: Notification sent (nma) => Failed 
Verbose logging is enabled.

It is difficult too see what is wrong, as the error message is blank. I have Domoticz 3.5274. Any Ideas?

marin849
Posts: 75
Joined: Tuesday 27 May 2014 10:36
Target OS: Raspberry Pi
Domoticz version: 2.4xxx
Location: Sweden
Contact:

Re: Notifymyandroid results in error, although key is OK

Post by marin849 » Friday 15 July 2016 0:39

Can anyone confirm that their NMA-notification is working?

DomoOr1981
Posts: 13
Joined: Sunday 30 July 2017 10:44
Target OS: Raspberry Pi
Domoticz version: 3.8373
Location: Holland
Contact:

Re: Notifymyandroid results in error, although key is OK

Post by DomoOr1981 » Friday 08 September 2017 12:37

I too, have the same problem and I'am curious how other boardmembers realized their Notifications (through NMA?).

This verify-test went fine (of course <my-api-key> was replaced by my own 48-char-api-key).
https://www.notifymyandroid.com/publica ... my-api-key>
My Browser returned:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<nma>
<success code="200" remaining="995" resettimer="30"/>
</nma>

Also, this notify-test went fine.
https://www.notifymyandroid.com/publica ... n=DomoDesc
My Browser returned:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<nma>
<success code="200" remaining="996" resettimer="32"/>
</nma>

And a little later this "popupped" on my phone:
Screenshot_NMA_Test.jpg
Screenshot_NMA_Test.jpg (10.97 KiB) Viewed 852 times

But I cannot get it to work in Domoticz. The testbutton in Domoticz result in (the log):
2017-09-08 11:46:29.122 Error: NMA:
2017-09-08 11:46:29.123 Error: Notification sent (nma) => Failed

2017-09-08 11:46:29.161 Active notification Subsystems: nma (1/12)

"Who o who" has got the solution?
Thank you for your help.

DomoOr1981
Posts: 13
Joined: Sunday 30 July 2017 10:44
Target OS: Raspberry Pi
Domoticz version: 3.8373
Location: Holland
Contact:

Re: Notifymyandroid results in error, although key is OK

Post by DomoOr1981 » Tuesday 12 September 2017 13:57

At last everything works fine now on my "RPi 1 B+" after a fresh installation with this older image: "2017-07-05-raspbian-jessie-lite.img" (my starting-trials were with different versions of Raspbian Stretch Lite).

SweetPants
Posts: 1775
Joined: Friday 12 July 2013 21:24
Target OS: Linux
Domoticz version: V3.8926
Location: The Netherlands
Contact:

Re: Notifymyandroid results in error, although key is OK

Post by SweetPants » Tuesday 12 September 2017 14:21

If you read the forum, you would have seen there are some problems with the latest Beta's concerning HTTP(s) mainly related using Stretch
Ubuntu 16.04.3 LTS on Intel NUC, MySensors 2.2.1, Pro Mini 3.3 8M RFM69, ESP8266 (SDK2.1.0), Sonoff, RFLink, RFXcom, MQTT, NodeRed, Domoticz Beta (from source)

DomoOr1981
Posts: 13
Joined: Sunday 30 July 2017 10:44
Target OS: Raspberry Pi
Domoticz version: 3.8373
Location: Holland
Contact:

Re: Notifymyandroid results in error, although key is OK

Post by DomoOr1981 » Sunday 17 September 2017 14:11

I can't read the whole forum the whole time ;)

So, to which topic(s) are you referring?

marin849
Posts: 75
Joined: Tuesday 27 May 2014 10:36
Target OS: Raspberry Pi
Domoticz version: 2.4xxx
Location: Sweden
Contact:

Re: Notifymyandroid results in error, although key is OK

Post by marin849 » Monday 13 November 2017 18:17

I just did a new install with Raspbian stretch lite and I have the same exact problem in both the new installation and the old installation, running Raspbian Wheezy. I am also curious which thread that is mentioned.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests