Has anyone has success with Zoneminder and Domoticz?

Post Reply
resentedpoet
Posts: 16
Joined: Tuesday 30 June 2015 5:02
Target OS: Raspberry Pi
Domoticz version:
Contact:

Has anyone has success with Zoneminder and Domoticz?

Post by resentedpoet » Tuesday 07 July 2015 23:14

Hi,

Has anyone had any success with Zoneminder and Domoticz? I have Zoneminder set up and working fine on my server and can see the streams in my browser no problem from another PC. I wanted to then integrate it into Domoticz, but I can't for some reason get the streams to work. Not sure what I am doing wrong here, was hoping someone could point me in the right direction.

Thanks,

User avatar
ThinkPad
Posts: 1754
Joined: Tuesday 30 September 2014 8:49
Target OS: Linux
Domoticz version: beta
Location: The Netherlands
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by ThinkPad » Wednesday 08 July 2015 10:24

As far as i know Domoticz only supports a JPEG/MJPEG stream. So have a look at the streams that Zoneminder spits out.

By the way, you don't happen to have Synology NAS? Otherwise you could add the cams there and use this script i made: http://domoticz.com/forum/viewtopic.php?f=23&t=6794
ThinkTheme - theme for Domoticz
My (Dutch) blog: http://thinkpad.tweakblogs.net - My Domoticz scripts: Bitbucket
I'm not (very) active anymore on this forum as i don't use Domoticz anymore.

resentedpoet
Posts: 16
Joined: Tuesday 30 June 2015 5:02
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by resentedpoet » Thursday 09 July 2015 10:14

Hi Thinkpad,

Ok, didn't know about the limitations, thanks for the info. I've been trying any and all the suggestions from http://www.ispyconnect.com/man.aspx?n=Zoneminder but still no luck.

Blipvert
Posts: 6
Joined: Saturday 26 March 2016 15:41
Target OS: Raspberry Pi
Domoticz version: V3.5248
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by Blipvert » Saturday 26 March 2016 16:09

I use the following imageURL to get my Zoneminder cameras (3 mpeg and 1 rtsp) into Domoticz:

<zoneminder_folder>/cgi-bin/zms?mode=single&monitor=<monitor_number>&

So, for example, if your Zoneminder web page is accessed via http://192.168.1.23:8080/zm and you want to get your camera 1 (monitor 1 in Zoneminder) configured in Domoticz, the Domoticz config would be:

Name: <name you wish for the camera>
IP Address: 192.168.1.23
Port: 8080
Username: <the username you use to access Zoneminder; blank if none>
Password: <the password you use for the username above; blank if none>
imageURL: zm/cgi-bin/zms?mode=single&monitor=1&

The version of ZoneminderI use is 1.29, and my Domoticz is v.3.4834 on a Raspberry Pi.

hasan
Posts: 38
Joined: Saturday 31 October 2015 15:41
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by hasan » Tuesday 31 May 2016 16:54

Blipvert wrote:I use the following imageURL to get my Zoneminder cameras (3 mpeg and 1 rtsp) into Domoticz:

<zoneminder_folder>/cgi-bin/zms?mode=single&monitor=<monitor_number>&

So, for example, if your Zoneminder web page is accessed via http://192.168.1.23:8080/zm and you want to get your camera 1 (monitor 1 in Zoneminder) configured in Domoticz, the Domoticz config would be:

Name: <name you wish for the camera>
IP Address: 192.168.1.23
Port: 8080
Username: <the username you use to access Zoneminder; blank if none>
Password: <the password you use for the username above; blank if none>
imageURL: zm/cgi-bin/zms?mode=single&monitor=1&

The version of ZoneminderI use is 1.29, and my Domoticz is v.3.4834 on a Raspberry Pi.
Hi Blipvert,

I follow your instruction but DOMOTICZ doesn't show anything. Zoneminder shows picture from cameras well. Do you have any ideas why?

Thanks

Blipvert
Posts: 6
Joined: Saturday 26 March 2016 15:41
Target OS: Raspberry Pi
Domoticz version: V3.5248
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by Blipvert » Wednesday 15 June 2016 20:58

I follow your instruction but DOMOTICZ doesn't show anything. Zoneminder shows picture from cameras well. Do you have any ideas why?
What is the exact URL that you use to access your Zoneminder? (mask the IP)

hasan
Posts: 38
Joined: Saturday 31 October 2015 15:41
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by hasan » Thursday 16 June 2016 11:28

Blipvert wrote:
I follow your instruction but DOMOTICZ doesn't show anything. Zoneminder shows picture from cameras well. Do you have any ideas why?
What is the exact URL that you use to access your Zoneminder? (mask the IP)
http://192.168.4.111/zm

Blipvert
Posts: 6
Joined: Saturday 26 March 2016 15:41
Target OS: Raspberry Pi
Domoticz version: V3.5248
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by Blipvert » Thursday 16 June 2016 20:10

Then your configuration should be:

Name: <name you wish for the camera on Domoticz>
IP Address: 192.168.4.111
Port: 80
Username:
Password:
imageURL: zm/cgi-bin/zms?mode=single&monitor=1&

That is, for as long as the camera that you want to access is the monitor 1 in Zoneminder; try increasing the number if you have more than one camera configured on Zoneminder.

For a test, you can try to access this url:
http://192.168.4.111/zm/cgi-bin/zms?mod ... &monitor=1
(again, change the monitor number to fit your needs)
If this does not show you an image, then there is something missing on your Zoneminder config.

hasan
Posts: 38
Joined: Saturday 31 October 2015 15:41
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by hasan » Friday 17 June 2016 13:38

Blipvert wrote:
Then your configuration should be:

Name: <name you wish for the camera on Domoticz>
IP Address: 192.168.4.111
Port: 80
Username:
Password:
imageURL: zm/cgi-bin/zms?mode=single&monitor=1&

That is, for as long as the camera that you want to access is the monitor 1 in Zoneminder; try increasing the number if you have more than one camera configured on Zoneminder.

For a test, you can try to access this url:
http://192.168.4.111/zm/cgi-bin/zms?mod ... &monitor=1
(again, change the monitor number to fit your needs)
If this does not show you an image, then there is something missing on your Zoneminder config.
This was exactly what I tried :( so I'll check ZM configuration ;)

Blipvert
Posts: 6
Joined: Saturday 26 March 2016 15:41
Target OS: Raspberry Pi
Domoticz version: V3.5248
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by Blipvert » Friday 17 June 2016 22:13

http://192.168.4.111/cgi-bin/zms?mode=single&monitor=1

Do you see an image if you try this url?

hasan
Posts: 38
Joined: Saturday 31 October 2015 15:41
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by hasan » Thursday 26 January 2017 10:34

Hi,

I installed everything from scratch and it is working now. Thanks for help...

woody4165
Posts: 530
Joined: Monday 14 March 2016 14:55
Target OS: Linux
Domoticz version: beta
Location: Rome, Italy
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by woody4165 » Saturday 11 November 2017 20:54

Hi
Just discovered zoneminder and it's really nice
Is there any possibility to get notified in domoticz when a motion is detected?
Thanks
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat

Trigun
Posts: 187
Joined: Wednesday 30 November 2016 12:58
Target OS: Raspberry Pi
Domoticz version: 4.9700
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by Trigun » Friday 07 September 2018 9:27

hi there,

i know this is an old threat but i am hoping someone can help me out here.
I have zoneminder configured and working well(v1.30.4).

I would like to enable the zoneminder stream into domoticz.
I've read the posts but can't seem to get it to work.

thanks in advance!

Grtz

Trigun
Posts: 187
Joined: Wednesday 30 November 2016 12:58
Target OS: Raspberry Pi
Domoticz version: 4.9700
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by Trigun » Monday 10 September 2018 9:45

got it working.
the username and password is still tough though but without it, it working fine.

thnx!

jannnfe
Posts: 29
Joined: Tuesday 30 January 2018 1:27
Target OS: Linux
Domoticz version: Beta
Location: Germany
Contact:

Re: Has anyone has success with Zoneminder and Domoticz?

Post by jannnfe » Sunday 30 September 2018 22:10

woody4165 wrote:
Saturday 11 November 2017 20:54
Hi
Just discovered zoneminder and it's really nice
Is there any possibility to get notified in domoticz when a motion is detected?
Thanks
Have a look at my modification of zmeventserver here: https://github.com/jannnfe/zmeventserverDomoticz

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest