Netatmo presence

Post Reply
mccharlet
Posts: 36
Joined: Saturday 01 March 2014 11:47
Target OS: Raspberry Pi
Domoticz version: beta
Location: Switzerland
Contact:

Netatmo presence

Post by mccharlet » Friday 02 December 2016 12:12

Hi,

I provided a netatmo presence and the detection works very well.

I'm very interesting to integrate this camera with my domoticz installation.

There is an initiative to add this composant in domoticz ?

Best regards
Last edited by mccharlet on Friday 02 December 2016 12:17, edited 1 time in total.

User avatar
emme
Posts: 798
Joined: Monday 27 June 2016 11:02
Target OS: Raspberry Pi
Domoticz version: latest
Location: Milano, Italy
Contact:

Re: Netatmo presence

Post by emme » Friday 02 December 2016 12:14

not on netatmo yet...
but did you already checked the NETATMO connector in the hardware list?

ciao
M
That's one small step for a programmer, one giant leap for me!
- - - - -
Raspberry Pi3 + AeonStick G5 + RFXCOMM433 + iRTrans Server + NodeJS
There's no stress in the mess!!

mccharlet
Posts: 36
Joined: Saturday 01 March 2014 11:47
Target OS: Raspberry Pi
Domoticz version: beta
Location: Switzerland
Contact:

Re: Netatmo presence

Post by mccharlet » Friday 02 December 2016 12:19

Hi,

Yes i checked and only the weather station is in the list

Best regards

frerkb
Posts: 13
Joined: Monday 19 September 2016 8:08
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Netatmo presence

Post by frerkb » Friday 02 December 2016 12:28

Suggestion in the go: you can probably connect the presence device with IFTTT. And you can connect domoticz with the ifttt maker channel. There you go with a workaround...

herscotty
Posts: 14
Joined: Wednesday 06 May 2015 22:57
Target OS: Linux
Domoticz version: beta
Location: Germany
Contact:

Re: Netatmo presence

Post by herscotty » Tuesday 24 April 2018 22:00

Is it still not possible to integrate it?

martijnm
Posts: 29
Joined: Thursday 04 February 2016 14:06
Target OS: Raspberry Pi
Domoticz version: 3.530
Location: Emmen, Drenthe
Contact:

Re: Netatmo presence

Post by martijnm » Tuesday 24 April 2018 22:21

It's possible. I have connected both Presence and Welcome cameras with Domoticz. It take some effort, but it's worth it. Follow the instructions in this post:
https://github.com/planetk/homebridge-n ... -297548581

Then copy the m3u8 link for the stream and the jpg link for the snapshot, and paste into domoticz. Good luck :)

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests