Installing SCC CC1101 module GPIO

Post Reply
sawo
Posts: 5
Joined: Monday 21 September 2015 12:09
Target OS: Raspberry Pi
Domoticz version:
Contact:

Installing SCC CC1101 module GPIO

Post by sawo » Thursday 08 October 2015 20:21

Hi all,

I hope that someone can assist or better help me with installing a SCC CC1101 (busware) GPIO to controll my 868mhz devices.
I got it from a friend, he used it with fhem, but switched to a different system now and is no longer in use.

can any one tell my how to get it work with domoticz?
on the website from busware they have a howto, but I have no idea what to do.

When I look at the log I see the message:
Error: GPIO: Failed to detect any pins, make sure you exported them!

Hope someone can help me.

THX
SAWO

sawo
Posts: 5
Joined: Monday 21 September 2015 12:09
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Installing SCC CC1101 module GPIO

Post by sawo » Sunday 11 October 2015 17:01

Hi,

does no one have a hint for me?
:o :(

Thx
sawo

Kytrix
Posts: 2
Joined: Wednesday 14 October 2015 19:46
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Installing SCC CC1101 module GPIO

Post by Kytrix » Wednesday 14 October 2015 20:00

Hello,

I have the same error,
Error: GPIO: Failed to detect any pins, make sure you exported them!

but I am able to see pin exported with gpio exports:
GPIO Pins exported:
12: out 0 none
17: out 0 none
18: out 0 none
22: out 0 none
23: out 0 none
24: out 0 none
25: out 0 none
27: out 0 none

I try to launch domoticz with the same user, but I still get the same error :/

Of course it didn't work inside domoticz, I get a GPIO_INIT_ERROR in place of gpio pin choose :/

the gpio readall call is working

Kytrix
Posts: 2
Joined: Wednesday 14 October 2015 19:46
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Installing SCC CC1101 module GPIO

Post by Kytrix » Saturday 17 October 2015 12:46

to be able to use my GPIO ports from domoticz, I use the workaround:
-I made a very basic script
gpio.sh placed in /home/pi/domoticz/scripts/

Code: Select all

#!/bin/bash
gpio write $1 $2
then I create a virtual button
and put actions in
On action: script:///home/pi/domoticz/scripts/gpio.sh 0 0
Off action: script:///home/pi/domoticz/scripts/gpio.sh 0 1

(my relay is on GPIO 0 and the state in inverted)

I still would use directly GPIO write from domoticz ..

Crash123
Posts: 35
Joined: Thursday 27 October 2016 7:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Installing SCC CC1101 module GPIO

Post by Crash123 » Sunday 30 October 2016 20:48

I have the same problem. gpio exports shows the exported pins but domoticz says failed to detect any pins, make sure you exported them. Any help?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest