Watermeter how to add (n00b question)

Post Reply
Lieuwke
Posts: 47
Joined: Saturday 06 December 2014 20:25
Target OS: Linux
Domoticz version:
Contact:

Watermeter how to add (n00b question)

Post by Lieuwke » Monday 02 January 2017 1:19

I have a TCRT5000 hooked up to pin 3 (GPIO2) of my Raspberry P1 B rev.2 (planning for Pi 3 very soon, but assuming it will work the same)

With the GPIO readall command i can see the status of the sensor and it is detecting pulses from my watermeter.
I made a contact in switches to check if domoticz can read it and i can see the switch open en close.

But now i am stuck at the next step. How do i get the watermeter to count in my utility view. Bare in mind i am a n00b, so i need baby steps to get there. I've searched the forum but i am not able to filter out the information i need due to the huge amount of information that is presented here. If my question is allready answered in another topic, my apologies. (please point me to the right topic if that's the case)

With best regards and thank you in advance,
Martin
Sony Raspberry Pi B V2.0
Homemade P1 cable on Landis/Gyr E350
C&K/Honeywell Security system connected to Domoticz
AEON Labs USB Z-Wave
TCRT5000 sensor watermeter -> revived..... and in progress....

MaikelK
Posts: 34
Joined: Saturday 01 November 2014 14:51
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Watermeter how to add (n00b question)

Post by MaikelK » Thursday 02 February 2017 22:18

I would also love to have some information regarding this.
I have ordered 10 of these sensorunits and if someone needs one i would be able to sell a few.

Lieuwke
Posts: 47
Joined: Saturday 06 December 2014 20:25
Target OS: Linux
Domoticz version:
Contact:

Re: Watermeter how to add (n00b question)

Post by Lieuwke » Thursday 02 February 2017 23:48

Hi MaikelK,

User Sincze was very helpfull to me, don't have it completely running, but i am on the right track.
See this topic viewtopic.php?p=116093
Sony Raspberry Pi B V2.0
Homemade P1 cable on Landis/Gyr E350
C&K/Honeywell Security system connected to Domoticz
AEON Labs USB Z-Wave
TCRT5000 sensor watermeter -> revived..... and in progress....

User avatar
sincze
Posts: 927
Joined: Monday 02 June 2014 22:46
Target OS: Raspberry Pi
Domoticz version: 3.8875
Location: Netherlands
Contact:

Re: RE: Re: Watermeter how to add (n00b question)

Post by sincze » Monday 27 February 2017 23:54

Lieuwke wrote:Hi MaikelK,

User Sincze was very helpfull to me, don't have it completely running, but i am on the right track.
See this topic viewtopic.php?p=116093
What problem are we going to solve today Image

Sent from my SM-G925F using Tapatalk
Using Pass2php since 2016-12
LAN: RFLink, P1-Port, OTGW, MySensors
USB: RFXCom, ZWave
WIFI: Mi-light Wifi-Bridge, Sonoff, ESP8266, Xiaomi Gateway
Solar: Omnik Inverter, PVOutput
Video: Kodi clients with Harmony HUB
Sensors: You name it I probably got 1.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest