Extra costs for P1 meter.

Use this forum to discuss possible implementation of a new feature before opening a ticket.
A developer shall edit the topic title with "[xxx]" where xxx is the id of the accompanying tracker id.
Duplicate posts about the same id. +1 posts are not allowed.
Post Reply
Isane
Posts: 18
Joined: Sunday 20 September 2015 16:20
Target OS: Windows
Domoticz version: Stable
Location: Netherlands
Contact:

Extra costs for P1 meter.

Post by Isane » Tuesday 31 January 2017 23:42

Hi,

In domoticz its possible to add the cost for energy t1 and t2,gas and water. Its only possible to add costs per kwh and m3.

It would be nice if i can add the following costs that I pay for energy (english/dutch)

- Fixed delivery/Vaste leveringskosten per month
- Green power/groene stroom per month
- Network Operation Costs/Netbeheerkosten per year
- Reducing energy tax/Vermindering energiebelasting (money back) per year.
- Energy return T1 and T2

And for gas:
- Fixed delivery/Vaste leveringskosten per month
- Network Operation Costs/Netbeheerkosten per year


Good idea?

rickvanakkeren
Posts: 37
Joined: Thursday 03 December 2015 14:58
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Extra costs for P1 meter.

Post by rickvanakkeren » Sunday 12 February 2017 17:03

Yeah, that would be a nice option!

edvd
Posts: 4
Joined: Wednesday 13 July 2016 12:42
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Hoorn, NH
Contact:

Re: Extra costs for P1 meter.

Post by edvd » Monday 05 February 2018 10:06

This would be a nice feature! Maybe there is another solution to add this costs?

DuDo
Posts: 7
Joined: Saturday 18 November 2017 10:25
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Extra costs for P1 meter.

Post by DuDo » Sunday 18 February 2018 11:00

there is no green power promotion tax no you have to pay for it! not get a promotion
so cost of having the ability to take power from the power line and the fact they want to do it in a clean way you have to pay for to.

Toulon7559
Posts: 487
Joined: Sunday 23 February 2014 18:56
Target OS: Raspberry Pi
Domoticz version: latest
Location: Hengelo(Ov)/NL
Contact:

Re: Extra costs for P1 meter.

Post by Toulon7559 » Sunday 18 February 2018 11:43

The only advantage you get by inclusion of tariffs etc. inside Domoticz, (imho) is that you may get financial information and related nice graphs besides the insertion of tariffs, without additional personal effort.

'Universal' solution is that your read-out the Smart meter by means of Domoticz and then calculate the desired results by means of a script:
a) the Smart meter tells you what type of consumption & production is realised and when
b) you have an agreement with your suppliers at what basic/network cost you get supplies
c) you also have an agreement with your suppliers at what variable cost you get supplies
d) in those agreements you can see how taxes etc. apply.

Based on the information collected for a) till d), it is ;-) 'just' a matter of good formulae to get the results with insertion of the proper tariffs according to your agreements:
that is 'only a simple' multiplication and addition of data .......

;-) Look at this matter with some reflexion.
Because if the results of the calculations match the bill you get from the suppliers, you have done a magnificient job:
:-( each year again I try to understand those bills, and usually the measuring data is OK, but I get totally confused in the financial section, because for the electrical consumption from the grid (= t1 and t2) and the delivery of solar energy to the grid (= t6 and t7) they create a picture which is hard to understand, and when you ask explanation they usually themselves have a problem .........
Set1 = RPI-B+RFXCom433+S0PCM+Linksprite-shield for BMP180/DS18B20/RS485+DDS238-1ZN
Set2 = RPI-3+RFLinkGTW+ESP8266s+PWS_WS7000
Common = 3*PVLogger+PWS_TFA_Nexus+KAKUs
=> Energy & Data Management based on Time and on PV&Consumption&Meteo

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest