user access or property administration

Use this forum to discuss possible implementation of a new feature before opening a ticket.
A developer shall edit the topic title with "[xxx]" where xxx is the id of the accompanying tracker id.
Duplicate posts about the same id. +1 posts are not allowed.
Post Reply
thaui
Posts: 61
Joined: Sunday 15 March 2015 20:53
Target OS: Raspberry Pi
Domoticz version:
Contact:

user access or property administration

Post by thaui » Tuesday 19 April 2016 11:52

Is there any property administartion planned for domoticz? I mean can an administrator handle the settings while a user (most of the people in a living place) can only use the rest of the system? This will also give the advantage to use the system in smaller offices.

Bikey
Posts: 428
Joined: Sunday 22 February 2015 13:19
Target OS: Raspberry Pi
Domoticz version: 3.xxx
Location: Netherlands
Contact:

Re: user access or property administration

Post by Bikey » Wednesday 20 April 2016 9:25

You already can create several users with different authorizations and access to pages. Isn't that sufficient?

thaui
Posts: 61
Joined: Sunday 15 March 2015 20:53
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: user access or property administration

Post by thaui » Tuesday 26 April 2016 11:44

Thanks for your reply. Will try it in the next few days and report if it fullfil my needs.

Skippiemanz
Posts: 295
Joined: Sunday 14 July 2013 20:21
Target OS: Raspberry Pi
Domoticz version: 3.5859
Location: Alkmaar, The Netherlands
Contact:

Re: user access or property administration

Post by Skippiemanz » Wednesday 27 April 2016 16:13

You can also grant users access to specific devices. So I think this could be used to achieve you're goal.

Verstuurd vanaf mijn SM-G925F met Tapatalk

Bikey
Posts: 428
Joined: Sunday 22 February 2015 13:19
Target OS: Raspberry Pi
Domoticz version: 3.xxx
Location: Netherlands
Contact:

Re: user access or property administration

Post by Bikey » Monday 02 May 2016 12:21

Skippiemanz wrote:You can also grant users access to specific devices. So I think this could be used to achieve you're goal.

Verstuurd vanaf mijn SM-G925F met Tapatalk
How do you configure access to specific devices? I only see how to give access to specific pages.

Skippiemanz
Posts: 295
Joined: Sunday 14 July 2013 20:21
Target OS: Raspberry Pi
Domoticz version: 3.5859
Location: Alkmaar, The Netherlands
Contact:

Re: user access or property administration

Post by Skippiemanz » Monday 02 May 2016 21:02

Go to users, and in the same rol as active, name and rights you will find devices.

Verstuurd vanaf mijn HTC One_M8 met Tapatalk

Bikey
Posts: 428
Joined: Sunday 22 February 2015 13:19
Target OS: Raspberry Pi
Domoticz version: 3.xxx
Location: Netherlands
Contact:

Re: user access or property administration

Post by Bikey » Tuesday 03 May 2016 16:35

Skippiemanz wrote:Go to users, and in the same rol as active, name and rights you will find devices.

Verstuurd vanaf mijn HTC One_M8 met Tapatalk
Yeah but that is to select if that user has rights to see the whole page of all devices. You can not select individual devices. I guess if you could allow this per room that would be a flexible solution.

lucalg
Posts: 16
Joined: Monday 31 August 2015 17:24
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: user access or property administration

Post by lucalg » Friday 14 April 2017 0:10

Good evening,
i'm interested too.

My need is to allow a list of users to come inside the parking. So I've created an event for a single user and works great.
Problem is that i have 250 tags to allow. So how to create a "you can park inside"list to work with event?

Tnx,
Luca

User avatar
EdddieN
Posts: 263
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Scotland
Contact:

Re: user access or property administration

Post by EdddieN » Thursday 11 May 2017 23:25

Hello,

Is this working?

I have created a new user and set devices/tabs to see but every time I try to log in it says incorrect username/password when logging from outside.

Maybe is my device that I have tampered quite a lot with lately....
11101101

User avatar
sincze
Posts: 909
Joined: Monday 02 June 2014 22:46
Target OS: Raspberry Pi
Domoticz version: 3.8875
Location: Netherlands
Contact:

Re: user access or property administration

Post by sincze » Sunday 23 July 2017 14:19

EdddieN wrote:Hello,

Is this working?

I have created a new user and set devices/tabs to see but every time I try to log in it says incorrect username/password when logging from outside.

Maybe is my device that I have tampered quite a lot with lately....
Did you find a solution?
I tried to add an extra user as viewer today and have the same issue.
Using Pass2php since 2016-12
LAN: RFLink, P1-Port, OTGW, MySensors
USB: RFXCom, ZWave
WIFI: Mi-light Wifi-Bridge, Sonoff, ESP8266, Xiaomi Gateway
Solar: Omnik Inverter, PVOutput
Video: Kodi clients with Harmony HUB
Sensors: You name it I probably got 1.

User avatar
EdddieN
Posts: 263
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Scotland
Contact:

Re: user access or property administration

Post by EdddieN » Monday 24 July 2017 10:39

Hi,

No I didn't but when I tried on a fresh install on a 2nd Domoticz to connect to it remotely from another Domoticz it did work. So I assumed it was my 1st one that I had messed a fair bit with it.
11101101

User avatar
sincze
Posts: 909
Joined: Monday 02 June 2014 22:46
Target OS: Raspberry Pi
Domoticz version: 3.8875
Location: Netherlands
Contact:

Re: user access or property administration

Post by sincze » Thursday 26 April 2018 22:41

sincze wrote:
Sunday 23 July 2017 14:19
EdddieN wrote:Hello,

Is this working?

I have created a new user and set devices/tabs to see but every time I try to log in it says incorrect username/password when logging from outside.

Maybe is my device that I have tampered quite a lot with lately....
Did you find a solution?
I tried to add an extra user as viewer today and have the same issue.
Mmm I'm still having the same issue.
Wanted to add a user to allow controlicz a way in. However I'm unable to login with a newly created user..

Code: Select all

2018-04-26 22:38:42.177 Error: Failed login attempt from xx.XXX.XXX.XX for user 'test' !
2018-04-26 22:39:08.931 Error: Failed login attempt from xx.XXX.XXX.XX for user 'test' !
1 have 1 user account (old old ancient) that is able to login... However all newly created accounts are not.
Using Pass2php since 2016-12
LAN: RFLink, P1-Port, OTGW, MySensors
USB: RFXCom, ZWave
WIFI: Mi-light Wifi-Bridge, Sonoff, ESP8266, Xiaomi Gateway
Solar: Omnik Inverter, PVOutput
Video: Kodi clients with Harmony HUB
Sensors: You name it I probably got 1.

User avatar
EdddieN
Posts: 263
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Scotland
Contact:

Re: user access or property administration

Post by EdddieN » Thursday 26 April 2018 23:50

I just tried to create a new one and log in externally with a Tor browser... same problem than before. Incorrect user/password. But I must mention that it is the same machine than before was giving me problems.

Have you tried on a different installation?
11101101

User avatar
sincze
Posts: 909
Joined: Monday 02 June 2014 22:46
Target OS: Raspberry Pi
Domoticz version: 3.8875
Location: Netherlands
Contact:

Re: user access or property administration

Post by sincze » Friday 27 April 2018 11:38

EdddieN wrote:
Thursday 26 April 2018 23:50
I just tried to create a new one and log in externally with a Tor browser... same problem than before. Incorrect user/password. But I must mention that it is the same machine than before was giving me problems.

Have you tried on a different installation?
This is a new installation on new HW, however, same old DB :D

Really strange

So 1 user that is already in the DB is working.
I created an additional one with username 'test' and pwd: 'test987' not working.... incorrect user/password.
If I open the DB with sql browser (ok username + pwd is hashed , excellent) the rest of the settings 'Active' , 'Rights', 'TabsEnabled" look the same. Beats me.
Using Pass2php since 2016-12
LAN: RFLink, P1-Port, OTGW, MySensors
USB: RFXCom, ZWave
WIFI: Mi-light Wifi-Bridge, Sonoff, ESP8266, Xiaomi Gateway
Solar: Omnik Inverter, PVOutput
Video: Kodi clients with Harmony HUB
Sensors: You name it I probably got 1.

User avatar
EdddieN
Posts: 263
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Scotland
Contact:

Re: user access or property administration

Post by EdddieN » Friday 27 April 2018 17:59

Ok, I just tried from outside my network and this way it works. I can create a new user from scratch or copy one and works fine.
Yesterday was trying from within my network, I wonder if it has to do with some conflict with the Settings page of asking for login for any IP not whitelisted?
11101101

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests