Z-Wave & IP Cams [email protected] 11-11 sale

Spotted a nice hardware deal? Share here!
Post Reply
dutchdevil83
Posts: 151
Joined: Monday 31 October 2016 20:34
Target OS: Raspberry Pi
Domoticz version: latest
Location: Netherlands
Contact:

Z-Wave & IP Cams [email protected] 11-11 sale

Post by dutchdevil83 » Wednesday 09 November 2016 20:29

Hi Guys,

Found this shop on Aliexpress that sells there Z-wave line for 1/3 of normal price on friday 11-11:

https://nl.aliexpress.com/store/203725? ... 0.0.BNZGrQ

Wall plugs / motion sensors / contacts all for around 20 euro.

I have ordered 2 wall plugs just a week ago for 30 euro a piece....

Is there anyone how can confirms that these z-wave products are supported on razberry z-wave & domoticz? If positive i will order lots on friday so i have every room covered with a motion sensor :D

Also IP cams are going for crazy prices....
Hardware
1x Raspberry Pi
1x Razberry Z-Wave
1x RFXtrx433E
1x Toon
1x GoodWe Solarpanels
2x FGSD-002 Smoke Detector
1x FGBS-001 Binaire Sensor (RFID lezer)
7x FGMS-001 Motion Sensor
3x ZW089 Verzonken Deursensor
7x NC Wallplug
&lots of KaKu stuff

MrGee
Posts: 16
Joined: Thursday 04 September 2014 16:51
Target OS: Raspberry Pi
Domoticz version: 3.5837
Location: NL
Contact:

Re: Z-Wave & IP Cams [email protected] 11-11 sale

Post by MrGee » Thursday 10 November 2016 11:05

I can confirm the NEO door sensor works on the latest Domoticz version + AEON G5 USB Stick, I have not tried the PIR yet

If you are located in NL and are interested I have a couple of spare door sensors, otherwise i'll put them on Marktplaats
(just PM me if you are)

dutchdevil83
Posts: 151
Joined: Monday 31 October 2016 20:34
Target OS: Raspberry Pi
Domoticz version: latest
Location: Netherlands
Contact:

Re: Z-Wave & IP Cams [email protected] 11-11 sale

Post by dutchdevil83 » Thursday 10 November 2016 13:16

MrGee wrote:I can confirm the NEO door sensor works on the latest Domoticz version + AEON G5 USB Stick, I have not tried the PIR yet

If you are located in NL and are interested I have a couple of spare door sensors, otherwise i'll put them on Marktplaats
(just PM me if you are)
Thnx for the offer but i have the Aeon Labs Built-In door sensors already installed.

I have read in this forum that the PIRS are also confirmed to work so i will order tomorrow.
Hardware
1x Raspberry Pi
1x Razberry Z-Wave
1x RFXtrx433E
1x Toon
1x GoodWe Solarpanels
2x FGSD-002 Smoke Detector
1x FGBS-001 Binaire Sensor (RFID lezer)
7x FGMS-001 Motion Sensor
3x ZW089 Verzonken Deursensor
7x NC Wallplug
&lots of KaKu stuff

lost
Posts: 127
Joined: Thursday 10 November 2016 10:30
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Z-Wave & IP Cams [email protected] 11-11 sale

Post by lost » Thursday 10 November 2016 13:36

dutchdevil83 wrote: I have read in this forum that the PIRS are also confirmed to work so i will order tomorrow.
Not easy to figure out which vendors sells the EU version (868.4MHz), as this is most of the times not specified??

RikP
Posts: 5
Joined: Thursday 24 March 2016 11:17
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Z-Wave & IP Cams [email protected] 11-11 sale

Post by RikP » Thursday 10 November 2016 15:45

MrGee wrote:I can confirm the NEO door sensor works on the latest Domoticz version + AEON G5 USB Stick, I have not tried the PIR yet

If you are located in NL and are interested I have a couple of spare door sensors, otherwise i'll put them on Marktplaats
(just PM me if you are)
I would be interested but can't PM since i am still a newbie here ;-)

dutchdevil83
Posts: 151
Joined: Monday 31 October 2016 20:34
Target OS: Raspberry Pi
Domoticz version: latest
Location: Netherlands
Contact:

Re: Z-Wave & IP Cams [email protected] 11-11 sale

Post by dutchdevil83 » Thursday 10 November 2016 15:47

lost wrote:
dutchdevil83 wrote: I have read in this forum that the PIRS are also confirmed to work so i will order tomorrow.
Not easy to figure out which vendors sells the EU version (868.4MHz), as this is most of the times not specified??
This seller sells EU version! Always leave note to supplier to be sure, but this supplier will ship standard EU version when no note is made.
Hardware
1x Raspberry Pi
1x Razberry Z-Wave
1x RFXtrx433E
1x Toon
1x GoodWe Solarpanels
2x FGSD-002 Smoke Detector
1x FGBS-001 Binaire Sensor (RFID lezer)
7x FGMS-001 Motion Sensor
3x ZW089 Verzonken Deursensor
7x NC Wallplug
&lots of KaKu stuff

User avatar
LouiS22
Posts: 456
Joined: Friday 27 February 2015 14:21
Target OS: Raspberry Pi
Domoticz version: beta
Location: Budapest, Hungary
Contact:

Re: Z-Wave & IP Cams [email protected] 11-11 sale

Post by LouiS22 » Thursday 10 November 2016 16:15

All of Neo's stuff are confirmed working. As the previous post noted, make sure you leave a note on EU version (or the one you need). I'm gonna order another Door Sensor and perhaps a Power Plug tomorrow :D

wmn79
Posts: 63
Joined: Monday 13 April 2015 23:19
Target OS: NAS (Synology & others)
Domoticz version: 3.5033
Location: Amsterdam, The Netherlands
Contact:

Re: Z-Wave & IP Cams [email protected] 11-11 sale

Post by wmn79 » Tuesday 22 November 2016 23:34

These are on sale again with this seller, the sale seems to continue for two more days: https://nl.aliexpress.com/store/group/Z ... 36270.html

User avatar
thecosmicgate
Posts: 232
Joined: Monday 06 April 2015 14:37
Target OS: Linux
Domoticz version: newest
Location: The Netherlands / Hoeven
Contact:

Re: RE: Re: Z-Wave & IP Cams [email protected] 11-11 sale

Post by thecosmicgate » Wednesday 23 November 2016 21:09

MrGee wrote:I can confirm the NEO door sensor works on the latest Domoticz version + AEON G5 USB Stick, I have not tried the PIR yet

If you are located in NL and are interested I have a couple of spare door sensors, otherwise i'll put them on Marktplaats
(just PM me if you are)
Are there some door sensors available?
It's nice to be important, but it's more important to be nice
Scooter ;)

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests