Domoticz version 3.8153 released (Stable)

News and/or updates regarding Domoticz or things related to Domoticz will be placed here.
Twitter: https://twitter.com/Domoticz | Facebook: https://www.facebook.com/domoticz | Changelog: Github
PieterS
Posts: 16
Joined: Wednesday 31 May 2017 16:06
Target OS: NAS (Synology & others)
Domoticz version: 3.0.8153
Location: Netherlands
Contact:

Re: Domoticz version 3.8153 released (Stable)

Post by PieterS » Tuesday 26 September 2017 19:52

Thanks for quick solution! It did the job. And after restore of db up and running again! Now i have a spk in my backups. .😊
Thanks a lot.

lost
Posts: 127
Joined: Thursday 10 November 2016 10:30
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Domoticz version 3.8153 released (Stable)

Post by lost » Thursday 05 October 2017 10:53

Hello,

My current domoticz install on a PI3 is old stable v3.5877 (on jessie) & I would like to rebuild a new µSD (industrial grade, as current one starts failing: Had to restore a backup 2 times in a month due to IO errors after write perfs have dropped a lot, so IMO current µSD is almost wear-out) load.

As well, this current install was first made from sources as in october last year, I needed up to date Domoticz/OZW... Install which was later updated from binaries when old stable arrived in november 2016. So there is still a lot of sources/compilation files I did not removed but are no more usefull.

So in order to start "clean" & minimize downtime, I would like to prepare all µSD from my PC: An updated Raspbian Stretch, downloading all Domoticz + OZW support, restoring all my scripts from my current version backup...

But what about all Domoticz personnal setup? Looking at files that are modified daily, we have at the domoticz root:

4 Files:
domocookie.txt
domoticz.db
domoticz.db-wal
domoticz.db-shm

1 directory:
backups/

After getting domoticzPID from "ps ax | grep -i domo",
sudo ls -al /proc/<domoticzPID>/fd
We can see domoticz-db files hereupper are opened by the process as well as the domoticz log file (which can be missed from restore) plus this last one:

5ft file:
domoticz/Config/OZW_Log.txt

So, the question is: Will restoring these 5 files, the directory (+ my own scripts) on a new off-line Domoticz install be enough or did I missed something (a file that may not be opened all the time for instance)?

I searched the wiki/doc but did not find any answers...

BR.

lost
Posts: 127
Joined: Thursday 10 November 2016 10:30
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Domoticz version 3.8153 released (Stable)

Post by lost » Thursday 05 October 2017 12:58

lost wrote:
Thursday 05 October 2017 10:53
Hello,

My current domoticz install on a PI3 is old stable v3.5877 (on jessie) & I would like to rebuild a new µSD (industrial grade, as current one starts failing: Had to restore a backup 2 times in a month due to IO errors after write perfs have dropped a lot, so IMO current µSD is almost wear-out) load.

As well, this current install was first made from sources as in october last year, I needed up to date Domoticz/OZW... Install which was later updated from binaries when old stable arrived in november 2016. So there is still a lot of sources/compilation files I did not removed but are no more usefull.

So in order to start "clean" & minimize downtime, I would like to prepare all µSD from my PC: An updated Raspbian Stretch, downloading all Domoticz + OZW support, restoring all my scripts from my current version backup...

To do so, I checked the install script to pipe in bash used by the binary install. The archive for my PI3(armv7l)/Linux can be downloaded off-install-script using:
www.domoticz.com/download.php?channel=r ... ine=armv7l

Then, I think using the steps described for the compiled from source install here (after "Make Domoticz startup at boot time") will do the job:
https://www.domoticz.com/wiki/Installin ... spberry_PI

Tell me if I'm wrong, but offline extraction on the SD & later steps should IMO work. Hope there is no install-blocker I may have missed, but this is what I'll try...

But what about all Domoticz personnal setup? Looking at files that are modified daily, we have at the domoticz root:

4 Files:
domocookie.txt
domoticz.db
domoticz.db-wal
domoticz.db-shm

1 directory:
backups/

After getting domoticzPID from "ps ax | grep -i domo",
sudo ls -al /proc/<domoticzPID>/fd
We can see domoticz-db files hereupper are opened by the process as well as the domoticz log file (which can be missed from restore) plus this last one:

5ft file:
domoticz/Config/OZW_Log.txt

So, the question is: Will restoring these 5 files, the directory (+ my own scripts) on a new off-line Domoticz install be enough or did I missed something (a file that may not be opened all the time for instance)?

I searched the wiki/doc but did not find any answers...

BR.

CaesarPL
Posts: 85
Joined: Tuesday 08 November 2016 15:03
Target OS: Raspberry Pi
Domoticz version:
Location: Poland
Contact:

Re: Domoticz version 3.8153 released (Stable)

Post by CaesarPL » Thursday 05 October 2017 15:10

As I am doing restore rather often (mainly due to my experiments and LMS failing sometimes) I can say that only domoticz.db is necessary. Of course if you have backup of scripts and other things placed in www folder.
HW: Raspberry Pi B+,Pi 3,2x Pi B,RFLink,FA20RF,DCS-930L,DCS-935L,Clarus switches,Eurochron,chinese and Alecto Temp,Owl Micro+,Mi Flora,Kerui door sensor,Yeelight,Xiaomi stuff
SF: Jessie,Domoticz 3.8153,Logitech Media srv,PiCorePlayers,Dashticz,Max2Play

lost
Posts: 127
Joined: Thursday 10 November 2016 10:30
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Domoticz version 3.8153 released (Stable)

Post by lost » Friday 06 October 2017 18:31

CaesarPL wrote:
Thursday 05 October 2017 15:10
As I am doing restore rather often (mainly due to my experiments and LMS failing sometimes) I can say that only domoticz.db is necessary. Of course if you have backup of scripts and other things placed in www folder.
Ok, thanks for the info!

mhoek
Posts: 1
Joined: Sunday 15 October 2017 9:59
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: Domoticz version 3.8153 released (Stable)

Post by mhoek » Sunday 15 October 2017 10:07

I've installed version 8153, but my youless LS120 gives strange values. (counter value 18446744949882880.000)
Is this a bug, or am I doing something wrong?

The same version installed on a Windows 10 PC works fine..

ConHome
Posts: 24
Joined: Saturday 29 August 2015 11:31
Target OS: Raspberry Pi
Domoticz version: V2.3354
Location: Echteld
Contact:

Re: Domoticz version 3.8153 released (Stable)

Post by ConHome » Saturday 28 October 2017 20:51

Is there finally a good way to install
a stable / beta version domoticz
new to a PI3 without any problems?
And what distribution is the best?

melgi
Posts: 3
Joined: Tuesday 15 August 2017 15:50
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: Domoticz version 3.8153 released (Stable)

Post by melgi » Tuesday 31 October 2017 15:58

Just to let you know: since last week my Domoticz is finding beta updates again. I had the issue that for a long time I couldn't get updates. This was because I couldn't update to the recent libssl version. Now somehow it all magically works. I guess my libssl implementation got updated, maybe by a new firmware version of my ASUStor NAS?

N1co
Posts: 7
Joined: Thursday 26 January 2017 16:49
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Domoticz version 3.8153 released (Stable)

Post by N1co » Tuesday 07 November 2017 13:52

eikensrtv wrote:
Thursday 21 September 2017 14:15
since upload V3.8153 (before V3.5877 and worked perfect for me ) i have nomore notifications. Back-up uSD to V3.5877 and everything works ok with notification !!
Same here.

acaonweb
Posts: 5
Joined: Thursday 23 March 2017 15:18
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Domoticz version 3.8153 released (Stable)

Post by acaonweb » Thursday 14 December 2017 11:59

hi, in this version it'n not already supported dzvents 2.3.0, right?
when we can have it?
how we can have it?

i miss important features like forSec and repeatAfterXXX thah in 2.2.0 aren't available

thanx in advance

fabrizio

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest