not using the zipato keypad to the max - numeric keypad and multi tag

Topics (not sure which fora)
when not sure where to post, post here and mods will move it to right forum.
Post Reply
leoncornelissen
Posts: 33
Joined: Monday 27 April 2015 20:33
Target OS: Raspberry Pi
Domoticz version: 3.8258
Location: Netherlands
Contact:

not using the zipato keypad to the max - numeric keypad and multi tag

Post by leoncornelissen » Monday 15 January 2018 22:56

Hi,

I'm using the Schlage Link Mini Keypad RFID for quite some time now and only with a couple of tags. But with the current default setup, I'm not using all features of the keypad.

there are 4 numbers on the keypad and the enter button, Wouldn't it be nice to also have the possibility to manually enter a code. Even better, that you can arm or disarm the alarm using one or multiple codes (depending on who is entering the building)
Or even have scene started based on a certain code.

This last feature should also be possible with the tags, that you can apply one tag to arm the house and another tag to enter sleep scene for instance.

At this moment, I see a lot of communication popping op in the openzwave control panel, so the information should be available but are there plans to implement this? Or is there a way how we can add more functionality ourselves?

leoncornelissen
Posts: 33
Joined: Monday 27 April 2015 20:33
Target OS: Raspberry Pi
Domoticz version: 3.8258
Location: Netherlands
Contact:

Re: not using the zipato keypad to the max - numeric keypad and multi tag

Post by leoncornelissen » Sunday 21 January 2018 16:00

no one?

User avatar
urbaxe
Posts: 13
Joined: Tuesday 24 May 2016 0:25
Target OS: Raspberry Pi
Domoticz version: 3.9629
Location: Sweden
Contact:

Re: not using the zipato keypad to the max - numeric keypad and multi tag

Post by urbaxe » Tuesday 23 January 2018 20:02

I'll think it's the same procedure as in this how-to
https://www.domoticz.com/wiki/Zwave#Usi ... Tag_Reader

Except
# 5 press the away button on the reader, when the red light is on, scan the tag
Instead of "scan the tag", enter a digit code. Followed by OK (Center button)
Raspberry Pi 3/v3.9629 - Tellstick DUO - Aeon Z-Stick gen5 - RaspBee - Wall mounted tablet + Imperihome - MANY switches/sensors

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests