kaku ALED-2709 Topic is solved

Topics (not sure which fora)
when not sure where to post, post here and mods will move it to right forum.
Post Reply
Eddiever
Posts: 70
Joined: Thursday 27 April 2017 20:32
Target OS: Raspberry Pi
Domoticz version: V3.8153
Location: The Netherlands (Hoogeveen)
Contact:

kaku ALED-2709

Post by Eddiever » Tuesday 26 September 2017 21:45

A nice neighbour of mine gave me a kaku ALED-2709 led light (dimmable). https://www.gamma.nl/assortiment/klikaa ... /p/B549083 Dutch. How do I connect this device to Domoticz? Through Devices it didn't show up unfortunately.
RPi 2B with Domoticz and cam module RPi 3 with cam module
1 rftxtrx433E module 1 solar-edge SE-3500
1 Sonoff Touch 3 Sonoff wifi swithes 6 kaku modules

manjh
Posts: 318
Joined: Saturday 27 February 2016 13:49
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: NL
Contact:

Re: kaku ALED-2709

Post by manjh » Tuesday 26 September 2017 21:51

Eddiever wrote:
Tuesday 26 September 2017 21:45
A nice neighbour of mine gave me a kaku ALED-2709 led light (dimmable). https://www.gamma.nl/assortiment/klikaa ... /p/B549083 Dutch. How do I connect this device to Domoticz? Through Devices it didn't show up unfortunately.
The Gamma description says that this lamp can be controlled via the normal KAKU remote control units. I would expect that you can link it using the normal KAKU method:
1. go to the switches page and then click manually add a switch.
2. select either ARC or AC for an RF controlled switch, select an address (doesn't matter which)
3. put the lamp in "learn" mode. If you don't know how, look it up on the KlikAanKlikUit site
https://www.klikaanklikuit.nl/nl/produc ... mbaar.html
Look under "downloads
4. immediately then press the test button on the Domoticz screen.
5. The light should now be coupled to the address you specified. The lamp will confirm this by blinking twice.
Last edited by manjh on Tuesday 26 September 2017 21:58, edited 1 time in total.
Hans

manjh
Posts: 318
Joined: Saturday 27 February 2016 13:49
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: NL
Contact:

Re: kaku ALED-2709

Post by manjh » Tuesday 26 September 2017 21:54

(msg removed)
Hans

Eddiever
Posts: 70
Joined: Thursday 27 April 2017 20:32
Target OS: Raspberry Pi
Domoticz version: V3.8153
Location: The Netherlands (Hoogeveen)
Contact:

Re: kaku ALED-2709

Post by Eddiever » Tuesday 26 September 2017 22:12

manjh, thanks for the quick reply. This did the trick. Again: thank you!
RPi 2B with Domoticz and cam module RPi 3 with cam module
1 rftxtrx433E module 1 solar-edge SE-3500
1 Sonoff Touch 3 Sonoff wifi swithes 6 kaku modules

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 3 guests