1-wire 24h graph only has 1 value per hour

Post Reply
mille
Posts: 4
Joined: Tuesday 01 April 2014 17:00
Target OS: Raspberry Pi
Domoticz version:
Contact:

1-wire 24h graph only has 1 value per hour

Post by mille » Wednesday 12 October 2016 21:59

Hardware: Raspberry Pi 2
OS:
Domoticz branch: Beta
Version number / build hash: v3.5747
Bug/problem or a question: Question
Occurs:
Problem: 1-wire 24h graph only has 1 value per hour
Steps already tried::
Reproduce:

Hi.
The 24h graph of my 1-Wire (OWFS) counters only has 1 value per hour. This makes the graph quite 'undetailed'.
Is there some settings for the graph interval or anything else I could do to make the graph more detailed?
Screenshot:
Skärmklipp 2016-10-12 21.50.26.png
Skärmklipp 2016-10-12 21.50.26.png (109.81 KiB) Viewed 947 times
Thank you.

Pchatill
Posts: 49
Joined: Wednesday 16 September 2015 5:52
Target OS: Raspberry Pi
Domoticz version: V2.3774
Contact:

Re: 1-wire 24h graph only has 1 value per hour

Post by Pchatill » Tuesday 25 October 2016 19:36

Hi
What parameters do you have for sensor Poll period?
(Set up/hardware/One wire)

mille
Posts: 4
Joined: Tuesday 01 April 2014 17:00
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: 1-wire 24h graph only has 1 value per hour

Post by mille » Tuesday 25 October 2016 20:03

Hi.
The Poll period is 300000 milliseconds. And all the temperature sensors shows the correct graph interval ( five minutes).

User avatar
bobkersten
Posts: 50
Joined: Tuesday 06 October 2015 9:17
Target OS: Linux
Domoticz version: beta
Location: Venray
Contact:

Re: 1-wire 24h graph only has 1 value per hour

Post by bobkersten » Wednesday 26 October 2016 16:25

What are the Type and SubType parameters of this device in the Devices overview screen?
Mac mini w/ ESXi running Ubuntu w/ Domoticz custombuild, SolarEdge 3500Wp, S0 Meter, P1 Smart Meter, RFXtrx433e, Aeotec Z-Stick Gen5

mille
Posts: 4
Joined: Tuesday 01 April 2014 17:00
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: 1-wire 24h graph only has 1 value per hour

Post by mille » Wednesday 26 October 2016 21:35

They are 'RFXMeter' and 'RFXMeter counter'

User avatar
bobkersten
Posts: 50
Joined: Tuesday 06 October 2015 9:17
Target OS: Linux
Domoticz version: beta
Location: Venray
Contact:

Re: 1-wire 24h graph only has 1 value per hour

Post by bobkersten » Sunday 30 October 2016 12:37

When I add a dummy meter of the same type and subtype, I get bars, also by the hour. That's correct behaviour since this type of device doesn't report actual power usage, only energy consumption. Ofcourse it's not that hard to calculate them, but that's currently not implemented. Still unsure why your system shows a spline though.
Attachments
Screen Shot 2016-10-30 at 11.35.25.png
Screen Shot 2016-10-30 at 11.35.25.png (133.49 KiB) Viewed 849 times
Mac mini w/ ESXi running Ubuntu w/ Domoticz custombuild, SolarEdge 3500Wp, S0 Meter, P1 Smart Meter, RFXtrx433e, Aeotec Z-Stick Gen5

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest